Aggiunto correttamente
Il prodotto è stato aggiunto al preventivo.
SKU: GT11-50BAT
Consegna stimata: September 19th - September 21st
Ordina ora per la spedizione il giorno successivo.
This 3V 550mAh lithium replacement battery is a direct substitute for the Mitsubishi GT11-50BAT memory backup battery used in GOT1000 GT11 series graphic operator terminals. When the original cell weakens, stored programs, parameters, and clock data are at risk during a power outage; replacing the battery on schedule keeps that data intact.
Protect stored programs, RAM, and real-time clock data on Panasonic, FDK (Sanyo), Mitsubishi, Interstate, and other industrial control systems with this 3V 550mAh lithium direct-replacement backup battery. It is built as a form-fit-function replacement for the original memory-backup cell, so it installs without rewiring, reprogramming, or controller reconfiguration.
This battery cross-references to Panasonic AFPX-BATT, Panasonic AFPX-BATT CR2540HR-flex, FDK (Sanyo) CR2450HR, Panasonic FP-X Series Controllers, Mitsubishi FX3U, and Mitsubishi FX3U-32BL, plus 10 additional cross-referenced part numbers, giving you a single verified replacement across these part numbers. Match your existing OEM battery by part number or by the equipment it powers to confirm fit.
| Nominal Voltage | 3 V |
| Rated Capacity | 550 mAh |
| Chemistry | Primary lithium (non-rechargeable) |
| Cell Size | Coin cell (CR2450HR type), approx. 24.5 x 5.0 mm |
| Termination | Tabbed with wire leads and connector |
| Rechargeable | No (primary cell) |
| Typical Use | Memory, program, and real-time clock backup |
| Condition | New, fresh stock |
This 3V 550mAh lithium replacement battery is a direct substitute for the Mitsubishi GT11-50BAT memory backup battery used in GOT1000 GT11 series graphic operator terminals. When the original cell weakens, stored programs, parameters, and clock data are at risk during a power outage; replacing the battery on schedule keeps that data intact.
Protect stored programs, RAM, and real-time clock data on Panasonic, FDK (Sanyo), Mitsubishi, Interstate, and other industrial control systems with this 3V 550mAh lithium direct-replacement backup battery. It is built as a form-fit-function replacement for the original memory-backup cell, so it installs without rewiring, reprogramming, or controller reconfiguration.
This battery cross-references to Panasonic AFPX-BATT, Panasonic AFPX-BATT CR2540HR-flex, FDK (Sanyo) CR2450HR, Panasonic FP-X Series Controllers, Mitsubishi FX3U, and Mitsubishi FX3U-32BL, plus 10 additional cross-referenced part numbers, giving you a single verified replacement across these part numbers. Match your existing OEM battery by part number or by the equipment it powers to confirm fit.
| Nominal Voltage | 3 V |
| Rated Capacity | 550 mAh |
| Chemistry | Primary lithium (non-rechargeable) |
| Cell Size | Coin cell (CR2450HR type), approx. 24.5 x 5.0 mm |
| Termination | Tabbed with wire leads and connector |
| Rechargeable | No (primary cell) |
| Typical Use | Memory, program, and real-time clock backup |
| Condition | New, fresh stock |
Ask questions about Replacement Battery for the Mitsubishi GT11-50BAT - 3V 550mAh Lithium
Fai domande su Replacement Battery for the Mitsubishi GT11-50BAT - 3V 550mAh Lithium
Domande suggerite