Aggiunto correttamente
Il prodotto è stato aggiunto al preventivo.
In stock this month · Altech panel parts
Build your next panel from one order
Panel builds stall when one part is on backorder. This month we’re stocking Altech terminal blocks, DIN rail and disconnects in bulk, so you can get everything for your build in one order and have it ship now.
Why one missing part stops the whole panel
A control panel can’t be wired, tested or shipped until every part on the bill of materials is on the bench. When the terminal blocks arrive this week, the rail next week and the disconnect after that, the build sits half-finished, the enclosure takes up floor space and the ship date slips.
Splitting a panel BOM across several suppliers adds its own overhead: more purchase orders, more freight charges and more packing slips to match against the drawing. The simplest fix is to buy the parts every panel needs from one place that has them on the shelf.
What’s in stock this month
These three parts make up the backbone of most panel layouts: the blocks that land your wiring, the rail they mount on and the disconnect that isolates incoming power.
Altech CTS10U/BU terminal block
Blue terminal blocks in bulk quantities for production runs or single builds. Many shops use blue blocks to keep a group of circuits, such as DC control, visually separate on the strip. Follow the color convention your drawings and standards call for.
In stock
Altech TS35 DIN rail
Standard 35 mm rail to mount your blocks, fusing and accessories. It’s the common top-hat profile that most terminal blocks, fuse holders and end stops clip onto, so one rail size covers most of the backplate.
In stock
Altech KEM325UL disconnect switch
UL-listed 3-pole enclosed disconnect. It gives the panel or the machine it feeds a lockable point to isolate power for service. Check its ratings against your load and application before you specify it.
In stock
Finish the panel in the same order
Also on the shelf: Altech JX4/2 jumpers and DDFL4U(E)/110 fuse blocks, so you can finish the panel in the same order.
- Jumpers bridge adjacent terminals that share a common potential, so you can skip the hand-cut wire links.
- Fuse blocks put circuit protection on the same DIN rail as your terminals.
Not sure a jumper fits the terminal block series you’re using? Send us your part numbers and we’ll check before you order.
| Part | What it does in the panel | Altech part |
|---|---|---|
| Terminal blocks | Land field and internal wiring | CTS10U/BU |
| DIN rail | Mounts blocks, fusing and accessories | TS35 |
| Disconnect switch | Isolates incoming power for service | KEM325UL |
| Jumpers | Bridge terminals at a common potential | JX4/2 |
| Fuse blocks | Circuit protection on the rail | DDFL4U(E)/110 |
Ordering for a production run?
Whether you’re building one panel or a run of fifty, we can quote the whole list at once so everything arrives together.
Get every part for your panel in one order
Same-day shipping and a 2-year warranty on the parts we sell.