The IC693MDL390 is a high-performance isolated AC output module designed for integration with the GE Fanuc Series 90-30 Programmable Logic Controller (PLC). This module features five isolated output points, each equipped with a separate common, allowing flexibility in power distribution across different AC phases or enabling connection to a single power supply. It operates at a current rating of 2 Amps and a voltage range of 120/240 volts AC, with an exceptional inrush current capacity exceeding 25 Amps for brief durations, making it suitable for controlling both inductive and incandescent loads. Each output is protected by a 3 Amp fuse and an RC snubber to mitigate transient electrical noise from the power line. The module includes LED indicators to display the operational status of each output; five green LEDs labeled A1 to A5 indicate the output status, while a red LED labeled 'F' signals a blown fuse condition. Users can easily access circuit identification information via an insert located inside the hinged door. This module is color-coded red to signify its high-voltage capabilities and is designed for installation in any I/O slot within a Series 90-30 PLC. It is configurable as an 8-point output, with programs referencing the five least significant bits. Additional electrical characteristics include a maximum output voltage drop of 1.5 volts, a minimum load current of 100 mA, and maximum leakage currents of 3 mA at 120 volts AC and 6 mA at 240 volts AC. The IC693MDL390 operates exclusively on AC power and is not compatible with DC voltage sources.