GE Fanuc IC200MDD845

Part Number: IC200MDD845

The IC200MDD845 is a versatile mixed module from GE Fanuc, designed to facilitate both discrete inputs and outputs in industrial automation applications. This module features two sets of eight discrete inputs and one set of eight relay outputs, providing a total of 24 I/O points. The relay outputs are of Form A type and are individually isolated, ensuring reliable operation. When the output logic bit is activated (set to “1”) and the host's central processing unit is operational, the output contacts close, allowing for seamless control of connected devices.

This module supports both positive and negative logic for input signals; however, transitioning to negative logic requires an upgrade to the IC200MDD845C model. Power for the IC200MDD845 is sourced from the backplane, with an additional power supply necessary for supporting external loads. The module draws up to a maximum of 270 milliamps based on the number of active I/O points. Input points are configured for 24 volts DC, while output voltage capabilities vary between 0-125 volts DC or 0-265 volts AC, accommodating frequencies within the 47-63 Hertz range.

The IC200MDD845 necessitates installation on a carrier base from the IC200CHS series, and it offers channel-to-channel isolation exclusively for output points. It is important to note that internal protective measures such as fuses and snubbers are not available. Device status is conveniently monitored through multiple LED indicators, enhancing operational visibility.