Añadido correctamente
El producto se ha añadido a su cotización.
1 de 1
Mitsubishi MR-J2-200CT
SKU: MR-J2-200CT-NS
Tenemos 2 en stock
Entrega estimada: August 25th - August 27th
Pida ahora para envío al día siguiente.
- Precio habitual
-
$4.337.000,00
- Precio de oferta
- $4.337.000,00
Nuevo remanente
$4.337.000
2 en stock
Se envía hoy
Description
- MRJ2200CT
- B60213
- SERVO DRIVE
- AMPLIFICADOR SERVO
- UNIDAD DE SERVOACCIONAMIENTO
- 3 HP
- 2 KW
- 11 AMP
- 200-230 VAC
- 3 FASES
- CNC
¿Cuál es la función de este servovariador?
Este es un amplificador servo Mitsubishi serie MELSERVO-J2 para el control de motores de mayor capacidad.
¿Qué aplicaciones requieren este tipo de accionamiento?
Se utiliza comúnmente en la automatización de servicio pesado, la manipulación de materiales y la maquinaria industrial.
¿Está diseñado este variador para motores de mayor potencia?
Sí, está diseñado para servomotores más grandes que requieren una mayor capacidad de salida.
¿Admite el control basado en retroalimentación?
Sí, admite retroalimentación de lazo cerrado para un control de movimiento preciso.
¿Se utiliza este variador en sistemas Mitsubishi antiguos?
Sí, se utiliza con frecuencia para mantener y dar servicio a plataformas servo Mitsubishi más antiguas.
-
Buying Options
-
Extend your warranty coverage at checkout 2 yrs included freePricing for this item — you’ll pick a term on the checkout page.
Extended plans are available at checkout on items $200 and up.
+1 yr → 3 total $650550/yr+3 yrs → 5 total $578267/yr+5 yrs → 7 total $433700/yrBEST VALUE+8 yrs → 10 total $325275/yrFull defect protection · free RMA evaluation & repair · same‑day replacement when in stock -
Description
- MRJ2200CT
- B60213
- SERVO DRIVE
- AMPLIFICADOR SERVO
- UNIDAD DE SERVOACCIONAMIENTO
- 3 HP
- 2 KW
- 11 AMP
- 200-230 VAC
- 3 FASES
- CNC
¿Cuál es la función de este servovariador?
Este es un amplificador servo Mitsubishi serie MELSERVO-J2 para el control de motores de mayor capacidad.¿Qué aplicaciones requieren este tipo de accionamiento?
Se utiliza comúnmente en la automatización de servicio pesado, la manipulación de materiales y la maquinaria industrial.¿Está diseñado este variador para motores de mayor potencia?
Sí, está diseñado para servomotores más grandes que requieren una mayor capacidad de salida.¿Admite el control basado en retroalimentación?
Sí, admite retroalimentación de lazo cerrado para un control de movimiento preciso.¿Se utiliza este variador en sistemas Mitsubishi antiguos?
Sí, se utiliza con frecuencia para mantener y dar servicio a plataformas servo Mitsubishi más antiguas.Learn More About the Mitsubishi MR-J2-200CT
The Mitsubishi MR-J2-200CT servo drive module is a servo amplifier with integrated positioning capabilities, which can be customized for systems ranging from a single axis to 32 axes. In the case of an alarm, emergency stop, or power outage, the Mitsubishi MR-J2-200CT servo amplifier's built-in dynamic brake can quickly stop the servo motor. Using this servo drive module, a simple, program-free positioning system can be established, or optimizations can be made to an existing system.
MR-J2-200CT Technical Specifications
The Mitsubishi MR-J2-200CT weighs 4.4 kilograms and works on a three-phase voltage supply of 200 to 230 VAC. The frequency of the incoming voltage supply must be 50 to 60 Hz. The speed frequency response of this model is 250 Hz, and it is controlled via a sine-wave PWM signal.
The servo amplifier can be commanded to jog in a particular direction at a specific pace through a contact input or an RS-422 (232C) connection. Overcurrent cutoff, servo motor overheat protection, regenerative fault prevention, Undervoltage protection, Overspeed protection, and excessive error protection are some safety features integrated into the servo module.
The three-phase power supply's permissible voltage and frequency fluctuations are 170 to 253 VAC and +/- 5 percent, respectively. The power supply capacity of the MR-J2-200CT servo module is 2.1 KVA, the same as the HC-SF121 servo motor (the HC-UF152 servo motor is 2.5 KVA). Keep in mind that the power supply's capacity will change depending on the impedance of the supply itself.
Installing and Operating Your Mitsubishi MR-J2-200CT
There is no loss of efficiency while using the MR-J2-200CT servo amplifier at altitudes up to 1,000 meters above sea level. The device must be mounted vertically in an IP54-rated control cabinet because of its low protection category (IP00). The model is at its best between 0 and +55 degrees Celsius. Ensure there is no dust, oil mist, or other reactive chemicals in the area where installation and operation will occur. Getting the best performance and the least vibration from the MR-J2-200CT requires a qualified technician to install and operate the unit.
For multiple servo amplifier installations, provide at least 100 mm of space between the top of each servo amplifier and the inside of the control cabinet. Use a fan to ensure that the temperature within the box does not rise over the ambient temperature. When setting up the control cabinet in a dirty or dusty area, be sure to flush the air out of the area before placing the box. The optimal temperature range for storing the Mitsubishi MR-J2-200CT servo drive module is -20 to +65 °C, with a maximum relative humidity of 90%. (noncondensing).
Signals and Wiring Instructions
Avoid damaging, overstressing, loading, or pinching the wires that connect the Mitsubishi MR-J2-200CT servo amplifier's wiring to the motor. If you are using electronic equipment near the servo amplifier, a noise filter can help reduce the impact of electromagnetic interference. Ensure that the diode is connected in the proper direction. Disable the emergency stop and other safety features by inadvertently connecting the servo amplifier in the wrong orientation. The current via the external relays should be 80mA at most. If the current consumption of the interface is more than 80mA, external power must be supplied.
FAST SHIPPING & EXCELLENT CUSTOMER SERVICE
Order a New Servo Amplifier Today
In addition to the MR-J2-200CT from Mitsubishi, Industrial Automation Co. carries thousands of replacement parts and industrial components from dozens of today's leading brands and manufacturers. Order all your industrial components from one convenient source and receive them quickly and easily. Please request a quote online or call one of our friendly customer service representatives and receive more details about shipping options and everything else you need to make the best decision for your factory floor.
-
Documentation
AI Product Assistant
Ask questions about Mitsubishi MR-J2-200CT
Asistente de IA
Haga preguntas sobre Mitsubishi MR-J2-200CT
Preguntas sugeridas
Quick search
Envíe su artículo para una evaluación gratuita y una cotización de reparación. Utilice nuestro formulario RMA o envíe una solicitud de reparación a service@iac.us.com, y nos pondremos en contacto con usted para evaluar su situación y proporcionarle información de envío.
Soporte técnico
¿Necesita ayuda con la instalación, la configuración o la resolución de problemas? Nuestros expertos técnicos están disponibles para ayudarle.
-
Soporte telefónico
(877) 727-8757
-
Soporte por correo electrónico
sales@iac.us.com
