Erfolgreich hinzugefügt
Das Produkt wurde Ihrem Angebot hinzugefügt.
1 von 2
Mitsubishi MR-J2S-70CP-S084
SKU: MR-J2S-70CP-S084-NS
Wir haben 5 auf Lager
Voraussichtliche Lieferung: September 22nd - September 24th
Jetzt bestellen für Versand am nächsten Tag.
- Normaler Preis
-
€1.012,95
- Sonderpreis
- €1.012,95
New Surplus
€1.012,95
5 auf Lager
Versand heute
Description
The Mitsubishi MR-J2S-70CP-S084 is an AC servo amplifier from the MELSERVO-J2-Super (MR-J2S) series, rated 750 W. The J2-Super generation improved on the MR-J2 line with higher response, real-time auto-tuning, and support for higher-resolution encoder feedback, and is widely installed on CNC machinery, packaging equipment, robotics, and automated production lines. The CP type includes built-in positioning with point-table programming, allowing simple positioning applications to run without an external motion controller. The S084 suffix denotes a special manufacturer specification with motion (point) table operation and CC-Link connectivity.
The drive provides closed-loop control of speed, torque, and position using encoder feedback from the motor. This model is discontinued by the manufacturer and is supplied as replacement stock for existing installations.
Technical Specifications
| Part Number | MR-J2S-70CP-S084 |
| Series | Mitsubishi MELSERVO-J2-Super (MR-J2S) |
| Product Type | AC servo amplifier |
| Rated Output | 750 W |
| Command Interface | Built-in positioning (point table) with CC-Link |
| Input Voltage | 200 VAC class, single- or 3-phase |
| Input Frequency | 50/60 Hz |
| Rated Input Current | 3.8 A |
| Special Specification | S084 |
-
Kaufoptionen
-
Extend your warranty coverage at checkout 2 yrs included freePricing for this item — you’ll pick a term on the checkout page.
Extended plans are available at checkout on items $200 and up.
+1 yr → 3 total $152/yr+3 yrs → 5 total $135/yr+5 yrs → 7 total $101/yrBEST VALUE+8 yrs → 10 total $76/yrFull defect protection · free RMA evaluation & repair · same‑day replacement when in stock -
Description
The Mitsubishi MR-J2S-70CP-S084 is an AC servo amplifier from the MELSERVO-J2-Super (MR-J2S) series, rated 750 W. The J2-Super generation improved on the MR-J2 line with higher response, real-time auto-tuning, and support for higher-resolution encoder feedback, and is widely installed on CNC machinery, packaging equipment, robotics, and automated production lines. The CP type includes built-in positioning with point-table programming, allowing simple positioning applications to run without an external motion controller. The S084 suffix denotes a special manufacturer specification with motion (point) table operation and CC-Link connectivity.
The drive provides closed-loop control of speed, torque, and position using encoder feedback from the motor. This model is discontinued by the manufacturer and is supplied as replacement stock for existing installations.
Technical Specifications
Part Number MR-J2S-70CP-S084 Series Mitsubishi MELSERVO-J2-Super (MR-J2S) Product Type AC servo amplifier Rated Output 750 W Command Interface Built-in positioning (point table) with CC-Link Input Voltage 200 VAC class, single- or 3-phase Input Frequency 50/60 Hz Rated Input Current 3.8 A Special Specification S084 Taking a Closer Look at the Mitsubishi MR-J2S-70CP-S084
The MR-J2S-70CP-S084 is an all-around AC servo amplifier with integrated positioning capabilities for a single axis. To establish a program-free, straightforward positioning system or to streamline operations, the MR-J2S-70CP-S084 servo amplifier is the best choice. The model comes standard with 3 points of point tables, but this may expand to 31 points with the help of the servo configuration software.
Three unique modes of operation are available for the MR-J2S-70CP-S084 servo amplifier: automatic operation, manual operation, and manual home position return. The model includes a built-in dynamic brake and weighs 1.7 kg, and the dynamic brake has an inertia-to-load ratio of 30.
The single-phase supply voltage is 230 VAC, whereas the three-phase supply voltage ranges from 200 to 230 VAC. The input voltage frequency should be between 50 and 60 Hz. Two command input methods —point table number input and position data input — are included in the Mitsubishi MR-J2S-70CP-S084 model.
This model MR-J2S-70CP-S084 has a power supply capacity of 1.3 kVA for both the HC-KFS73 and HC-MFS73 servo motors. The model permits voltage changes between 170 and 253 VAC for three-phase and 207 and 253 VAC for single-phase. A thermal electronic relay is included in the servo amplifier to prevent overloading.
Installation and Ideal Operating Conditions of the Mitsubishi MR-J2S-70CP-S084
The module must be stored in a dry environment with a maximum relative humidity of 90% and temperatures between -20 and +65 degrees Celsius (non-freezing). At altitudes up to 1,000 meters above sea level, the servo amplifier keeps performing at the same level. The poor protection category of the servo amplifier means that the amplifier should be installed in a control cabinet with a good protection rating. The MR-J2S-70CP-S084 servo amplifier and the control box should be installed with the required space between them.
It is recommended that the MR-J2S-70CP-S084 model be used in temperatures between 0 and +55 degrees Celsius (non-freezing), with a maximum relative humidity of 90%. The model must be used inside and not exposed to direct sunlight. Installation and operating areas should be free of dust, oil mist, and other reactive chemicals. The device is robust enough to withstand vibrations up to 5.9 m/s2 without suffering performance degradation. To keep the servo amplifier safe during operation, ensure no drill chips or wire scraps enter the control cabinet.
Software Specifications and Safety Precautions For Your Mitsubishi MR-J2S-70CP-S084
You can execute various tasks on a computer with the MR-J2S-70CP-S084 servo amplifier and the MR Configurator software (version MR2JW3-SETUP151E or higher). This software allows multiple file processing, diagnosis, and testing tasks.
Pentium® 133MHz, Pentium® 150MHz, Pentium® 300MHz, and higher CPUs are recommended for use with this software. The software will run on Windows XP and later versions and need 60MB of disk space to install.
General Safety Tips
Ensure that the MR-J2S-70CP-S084 servo amplifier is well-protected from unwanted particles — like screws, metal scraps, conductive materials, lubricant, and other flammable materials. Do not carry the amplifier by its front cover! There is a risk of the servo amplifier failing. Anyone working with the wiring of the Mitsubishi MR-J2S-70CP-S084 must be professionally trained. Before the servo motor and amplifier have been mounted, no wiring should be done.
FAST SHIPPING & EXCELLENT CUSTOMER SERVICE
Order a Replacement Mitsubishi MR-J2S-70CP-S084 From Industrial Automation Co.
Get high-quality industrial replacement parts from today's leading manufacturers when you shop at Industrial Automation Co. The Mitsubishi MR-J2S-70CP-S084 is a high-performance servo amplifier that combines advanced features and robust design into one powerful tool. This servo amplifier is designed to improve the efficiency and precision of your production processes. Our inventory includes thousands of industrial components to match up with your automated systems and controls. Request a quote today!
-
Documentation
AI Product Assistant
Ask questions about Mitsubishi MR-J2S-70CP-S084
KI-Assistent
Stellen Sie Fragen zu Mitsubishi MR-J2S-70CP-S084
Vorgeschlagene Fragen
Quick search
Senden Sie Ihren Artikel für eine kostenlose Bewertung und ein Reparaturangebot ein. Verwenden Sie unser RMA-Formular oder senden Sie eine Reparaturanfrage an service@iac.us.com. Wir kontaktieren Sie anschließend, um Ihre Situation zu beurteilen und Ihnen Versandinformationen bereitzustellen.
Technischer Support
Benötigen Sie Hilfe bei Installation, Konfiguration oder Fehlerbehebung? Unsere technischen Experten unterstützen Sie gerne.
-
Telefonischer Support
(877) 727-8757
-
E-Mail-Support
sales@iac.us.com
