Erfolgreich hinzugefügt
Das Produkt wurde Ihrem Angebot hinzugefügt.
1 von 1
Mitsubishi MR-J2S-200A
SKU: MR-J2S-200A-NS
Low stock
Voraussichtliche Lieferung: October 14th - October 16th
Jetzt bestellen für Versand am nächsten Tag.
- Normaler Preis
- €1.139,95
- Sonderpreis
- €1.139,95
New Surplus
€1.139,95
Low stock
Versand heute
Description
The Mitsubishi MR-J2S-200A is an AC servo amplifier from the MELSERVO-J2-Super (MR-J2S) series, rated 2.0 kW. The J2-Super generation improved on the MR-J2 line with higher response, real-time auto-tuning, and support for higher-resolution encoder feedback, and is widely installed on CNC machinery, packaging equipment, robotics, and automated production lines. The A-type interface accepts general-purpose analog speed/torque commands and pulse-train position commands for use with a wide range of motion controllers and PLC positioning modules.
The drive provides closed-loop control of speed, torque, and position using encoder feedback from the motor. This model is discontinued by the manufacturer and is supplied as replacement stock for existing installations.
Technical Specifications
| Part Number | MR-J2S-200A |
| Series | Mitsubishi MELSERVO-J2-Super (MR-J2S) |
| Product Type | AC servo amplifier |
| Rated Output | 2.0 kW |
| Command Interface | Analog / pulse train (general purpose) |
| Input Voltage | 200-230 VAC, 3-phase |
| Input Frequency | 50/60 Hz |
| Rated Input Current | 10.5 A |
-
Kaufoptionen
-
Extend your warranty coverage at checkout 2 yrs included freePricing for this item — you’ll pick a term on the checkout page.
Extended plans are available at checkout on items $200 and up.
+1 yr → 3 total $171/yr+3 yrs → 5 total $152/yr+5 yrs → 7 total $114/yrBEST VALUE+8 yrs → 10 total $85/yrFull defect protection · free RMA evaluation & repair · same‑day replacement when in stock -
Description
The Mitsubishi MR-J2S-200A is an AC servo amplifier from the MELSERVO-J2-Super (MR-J2S) series, rated 2.0 kW. The J2-Super generation improved on the MR-J2 line with higher response, real-time auto-tuning, and support for higher-resolution encoder feedback, and is widely installed on CNC machinery, packaging equipment, robotics, and automated production lines. The A-type interface accepts general-purpose analog speed/torque commands and pulse-train position commands for use with a wide range of motion controllers and PLC positioning modules.
The drive provides closed-loop control of speed, torque, and position using encoder feedback from the motor. This model is discontinued by the manufacturer and is supplied as replacement stock for existing installations.
Technical Specifications
Part Number MR-J2S-200A Series Mitsubishi MELSERVO-J2-Super (MR-J2S) Product Type AC servo amplifier Rated Output 2.0 kW Command Interface Analog / pulse train (general purpose) Input Voltage 200-230 VAC, 3-phase Input Frequency 50/60 Hz Rated Input Current 10.5 A Learn More About the Mitsubishi MR-J2S-200A Servo AC Amplifier
The Mitsubishi MR-J2S-200A is a high-performance, multipurpose AC servo amplifier. The amplifier can perform tasks while switching between several control modes, such as position control, speed control, and torque control. The Mitsubishi MR-J2S-200A servo AC amplifier uses a high-speed pulse train to regulate a motor's rotational speed and direction for precise positioning.
Technical Specifications of the MR-J2S-200A
The permissible voltage supply for the three-phase power supply of the Mitsubishi MR-J2S-200A is between 170 to 253 VAC. The model weighs 2 kilograms and has several protective functions such as Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal relay), encoder error protection, Undervoltage, instantaneous power failure protection, and Overspeed protection. This model features a built-in dynamic brake and a current control system as additional safety features.
The MR-J2S-200A servo AC amplifier has three control modes: position control, speed control, and torque control. The maximum input pulse frequency of the model is 500 kbps for the differential receiver and 200 kbps for the open collector in the position control mode. The speed control range lies between 1:2000 for analog speed command and 1:5000 for internal speed command. The analog speed command input has a voltage range of 0 to +/- 10 VDC, and the analog torque command input has a 0 to +/- 8 VDC voltage.
How to Install Your MR-J2S-200A
Allow for enough side clearance (10 mm), top clearance (40 mm), and bottom clearance (40 mm) while installing a single servo amplifier. Clearances of 100 mm at the top, 40 mm at the bottom, 30 mm at the sides, and 10 mm at the bottom between the modules are required when installing two or more amplifiers in a control cabinet.
A fan must be installed to regulate the control cabinet's internal temperature. To prevent excessive vibrations and obtain optimal performance, the MR-J2S-200A must be installed vertically. Additionally, the installation needs to be performed by a trained expert.
Ideal Operating Conditions
The temperature range in which the model may be operated is between 0 and +55 degrees Centigrade, and the temperature range in which it can be stored is between -20 and +65 degrees Centigrade. The operational and storage area should have a maximum relative humidity of up to 90 percent.
Mitsubishi MR-J2S-200A Servo AC Amplifier Wiring Instructions
The servo amplifier's power input terminals (L1, L2, L3, L11, L21) should be connected to the appropriate power source. Connecting the motor's ground wire to the amplifier's PE terminal is standard practice. The pins of connectors CN1A and CN1B do not receive 24 VDC or higher voltages. Terminals U, V, and W of the servo amplifier deliver power to the servo motor. No undue pressure should be applied to the electrical wires.
As the heat sink of the servo amplifier and motor may remain hot for some time after the power has been turned off, precautions should be taken to ensure that no one's hands or other components (cables, etc.) come into touch with them by mistake. High temperatures might cause burns or mechanical failure.
FAST SHIPPING & EXCELLENT CUSTOMER SERVICE
Order Servo AC Amplifiers and More From Industrial Automation Co.
Along with the MR-J2S-200A from Mitsubishi, Industrial Automation Co. carries thousands of industrial replacement parts and components for your robotics machines and automated systems. Choose from a broad selection of servo drives, motors, spindle drives, programmable logic controllers (PLCs), and more. At Industrial Automation Co., our mission is to serve our customers with the best selection of automated products so they can always find what they need when needed. Request a quote online or place an order today.
-
Documentation
Documentation & assistant
We don’t have the official datasheet for this part yet. Ask the assistant, or request the document from our team.
Ask the product assistant
Answers cite the page they come from. Critical values should be checked on the datasheet.
Product assistant
Answers from the documents for Mitsubishi MR-J2S-200A
MR-J2S-200A-NS · from the documents
Answering from
General knowledge · unverified
Quick search
Senden Sie Ihren Artikel für eine kostenlose Bewertung und ein Reparaturangebot ein. Verwenden Sie unser RMA-Formular oder senden Sie eine Reparaturanfrage an service@iac.us.com. Wir kontaktieren Sie anschließend, um Ihre Situation zu beurteilen und Ihnen Versandinformationen bereitzustellen.
Technischer Support
Benötigen Sie Hilfe bei Installation, Konfiguration oder Fehlerbehebung? Unsere technischen Experten unterstützen Sie gerne.
-
Telefonischer Support
(877) 727-8757
-
E-Mail-Support
sales@iac.us.com
