Añadido correctamente
El producto se ha añadido a su cotización.
1 de 1
Fuji Electric NEMA1-75F1-4
SKU: NEMA1-75F1-4
Tenemos 4 en stock
Entrega estimada: September 1st - September 3rd
Pida ahora para envío al día siguiente.
- Precio habitual
-
$397.300
- Precio de oferta
- $397.300
Default Title
$397.300
4 en stock
Se envía hoy
Description
The Fuji Electric NEMA1-75F1-4 is a NEMA/UL Type 1 enclosure conversion kit for the FRENIC-Eco (F1) variable frequency drive (VFD). Installing this kit upgrades the drive's ingress protection to NEMA/UL Type 1, protecting against incidental contact with internal components and limited falling dirt, and meeting NEC and UL requirements for drives installed in indoor open-type locations.
NEMA Type 1 compliance is commonly required by electrical inspectors when a drive is installed outside a separate enclosure. The NEMA1-75F1-4 is engineered to fit a specific FRENIC-Eco (F1) frame size without affecting thermal performance or voiding the UL listing. Multiple kit variants exist, so verify the correct part number for your drive frame size and voltage class before ordering.
Technical Specifications
| Part Number | NEMA1-75F1-4 |
| Product Type | NEMA/UL Type 1 enclosure conversion kit |
| Compatible Drive Series | FRENIC-Eco (F1) VFD |
| Enclosure Rating Achieved | NEMA/UL Type 1 (IP20 equivalent) |
| Drive Voltage Class | 400 V class (380-480 VAC three-phase) |
| Frame Compatibility | Sized for a specific FRENIC-Eco (F1) capacity frame; match the kit number to the drive model |
| Mounting | Attaches directly to the drive chassis; conduit entry provisions included |
| Certifications | UL listing of the drive maintained when installed per instructions |
| Manufacturer | Fuji Electric |
The FRENIC-Eco (F1) series was Fuji Electric's energy-saving drive platform for HVAC, pump, and fan applications, featuring an optimized V/f control algorithm for variable-torque loads, a built-in PID controller for pressure or flow control, and RS-485 Modbus RTU communication. The F1 series is discontinued; this kit supports installed-base drives and remaining stock.
-
Buying Options
-
Extend your warranty coverage at checkout 2 yrs included freePricing for this item — you’ll pick a term on the checkout page.
Extended plans are available at checkout on items $200 and up.
+1 yr → 3 total $59595/yr+3 yrs → 5 total $52973/yr+5 yrs → 7 total $39730/yrBEST VALUE+8 yrs → 10 total $29798/yrFull defect protection · free RMA evaluation & repair · same‑day replacement when in stock -
Description
The Fuji Electric NEMA1-75F1-4 is a NEMA/UL Type 1 enclosure conversion kit for the FRENIC-Eco (F1) variable frequency drive (VFD). Installing this kit upgrades the drive's ingress protection to NEMA/UL Type 1, protecting against incidental contact with internal components and limited falling dirt, and meeting NEC and UL requirements for drives installed in indoor open-type locations.
NEMA Type 1 compliance is commonly required by electrical inspectors when a drive is installed outside a separate enclosure. The NEMA1-75F1-4 is engineered to fit a specific FRENIC-Eco (F1) frame size without affecting thermal performance or voiding the UL listing. Multiple kit variants exist, so verify the correct part number for your drive frame size and voltage class before ordering.
Technical Specifications
Part Number NEMA1-75F1-4 Product Type NEMA/UL Type 1 enclosure conversion kit Compatible Drive Series FRENIC-Eco (F1) VFD Enclosure Rating Achieved NEMA/UL Type 1 (IP20 equivalent) Drive Voltage Class 400 V class (380-480 VAC three-phase) Frame Compatibility Sized for a specific FRENIC-Eco (F1) capacity frame; match the kit number to the drive model Mounting Attaches directly to the drive chassis; conduit entry provisions included Certifications UL listing of the drive maintained when installed per instructions Manufacturer Fuji Electric The FRENIC-Eco (F1) series was Fuji Electric's energy-saving drive platform for HVAC, pump, and fan applications, featuring an optimized V/f control algorithm for variable-torque loads, a built-in PID controller for pressure or flow control, and RS-485 Modbus RTU communication. The F1 series is discontinued; this kit supports installed-base drives and remaining stock.
-
Documentation
AI Product Assistant
Ask questions about Fuji Electric NEMA1-75F1-4
Asistente de IA
Haga preguntas sobre Fuji Electric NEMA1-75F1-4
Preguntas sugeridas
Quick search
Envíe su artículo para una evaluación gratuita y una cotización de reparación. Utilice nuestro formulario RMA o envíe una solicitud de reparación a service@iac.us.com, y nos pondremos en contacto con usted para evaluar su situación y proporcionarle información de envío.
Soporte técnico
¿Necesita ayuda con la instalación, la configuración o la resolución de problemas? Nuestros expertos técnicos están disponibles para ayudarle.
-
Soporte telefónico
(877) 727-8757
-
Soporte por correo electrónico
sales@iac.us.com
