Honeywell Ball Valve Assembly, 2 Way, 1/2 in NPT - VBN2AFPA3001

The Honeywell Ball Valve Assembly, a 2 Way 1/2 in NPT Characterized Control Valve, is coated with nickel chrome plated brass for durability and utilizes a Direct Coupled Actuator with a strength of 27 in-lb. This Non-Spring Return Fail In Place valve operates at 24 VAC, providing Modulating control. Available in sizes ranging from 1/2in to 3in with internal female NPT connections, it is engineered to facilitate specific loop flow through a Reduced B Port Cv.

The control valve is field configurable, allowing for either a normally open or normally closed fail-safe position. It includes a detachable manual operating handle to control the valve during installation or during a power failure. The actuator can be attached to the valve in any of four orientations for versatile use.

Featuring a shield-serviceable stem assembly, it presents a wide range of Cv choices, from .033 to 292. The valve can be installed in a Globe Valve T pattern without requiring any additional elbows or piping.

This valve is suitable for Hot and Chilled Water services with Glycol Solutions Up to 50% and it functions with an Equal Percentage flow characteristic. Operating temperatures can range between -22 F to 250 F (-30 C to 121 C), and it can safely operate at a maximum of 360 psi.

Power Consumption is rated at 6 VA, and operating conditions can range from -4 F To 131 F (-20 C To 55 C). Electrical Connections involve Field Wiring 18 To 20 AWG To Screw Terminals, located conveniently under the removable access cover. Encased in a NEMA 2, IP40 Housing, this Ball Valve Assembly exemplifies Honeywell's commitment to robust, versatile and efficient industrial control systems.