Successfully Added
The product is added to your quote.
FRENIC-Ace (E2)
Fuji Electric FRENIC-Ace (E2) General-Purpose Variable Frequency Drives
The FRENIC-Ace (E2) is Fuji Electric's general-purpose drive series and the volume workhorse of the FRENIC line. Available from 1/4 HP to 450 HP on 230 V and 460 V three-phase supplies, it is built around the applications where variable-speed control returns the most money: centrifugal fans, pumps and compressors running on variable-torque loads.
Energy savings and control performance
The E2's optimized energy-saving V/f mode automatically trims output voltage at partial load to cut motor iron losses, delivering savings of up to 30% against fixed-speed operation on variable-torque loads. When an application needs tighter regulation than V/f can provide, dynamic torque vector control improves low-speed torque and transient response without adding an encoder. Most models carry a dual Normal Duty / Heavy Duty rating, so one drive family covers both variable-torque fans and pumps and constant-torque conveyors and machinery.
Standard and optional features
- Built-in PID controller, auto-tuning and 8-step multi-speed operation
- DC braking, coast-to-stop and ramp-to-stop modes
- RS-485 Modbus RTU standard; optional PROFIBUS-DP, DeviceNet, EtherNet/IP and CC-Link cards
- Full protection suite: overcurrent, overvoltage, undervoltage, motor overload, ground fault
Typical applications
HVAC supply and return fans, air handlers, centrifugal and booster pumps, water and wastewater treatment, mixers and agitators, and general machine drives. UL/cUL listed and CE marked. Enclosure conversion kits, keypads and communication cards for the series are listed alongside the drives.
FRENIC-Ace (E2)
Fuji Electric FRENIC-Ace (E2) General-Purpose Variable Frequency Drives
The FRENIC-Ace (E2) is Fuji Electric's general-purpose drive series and the volume workhorse of the FRENIC line. Available from 1/4 HP to 450 HP on 230 V and 460 V three-phase supplies, it is built around the applications where variable-speed control returns the most money: centrifugal fans, pumps and compressors running on variable-torque loads.
Energy savings and control performance
The E2's optimized energy-saving V/f mode automatically trims output voltage at partial load to cut motor iron losses, delivering savings of up to 30% against fixed-speed operation on variable-torque loads. When an application needs tighter regulation than V/f can provide, dynamic torque vector control improves low-speed torque and transient response without adding an encoder. Most models carry a dual Normal Duty / Heavy Duty rating, so one drive family covers both variable-torque fans and pumps and constant-torque conveyors and machinery.
Standard and optional features
- Built-in PID controller, auto-tuning and 8-step multi-speed operation
- DC braking, coast-to-stop and ramp-to-stop modes
- RS-485 Modbus RTU standard; optional PROFIBUS-DP, DeviceNet, EtherNet/IP and CC-Link cards
- Full protection suite: overcurrent, overvoltage, undervoltage, motor overload, ground fault
Typical applications
HVAC supply and return fans, air handlers, centrifugal and booster pumps, water and wastewater treatment, mixers and agitators, and general machine drives. UL/cUL listed and CE marked. Enclosure conversion kits, keypads and communication cards for the series are listed alongside the drives.
