GE Fanuc IC200BEM003

The IC200BEM003 is a PROFIBUS-DP Master Module from the GE Fanuc Versamax Series, designed to facilitate robust network communications within PLC systems. This module allows compatible Versamax controllers, such as the CPU005, ProfitNet Scanner, or CPUE05, to seamlessly send and receive data over a PROFIBUS-DP network. It supports a wide range of Profibus communication features, accommodating all standard data rates and sync/freeze modes. With a capacity for up to 3,584 bytes of input and output data, the IC200BEM003 efficiently handles DP-V1 read, write, and alarm messages. Firmware updates can be easily managed through the WinLoader software utility, which connects indirectly from the host controller. When installation occurs in hazardous areas, adherence to safety warnings regarding power disconnection is imperative. The module mounts onto a communications carrier positioned on a standard 35 mm x 7.5 mm DIN rail, ensuring proper grounding via a conductive, non-painted surface. To secure the module, it is important to install it with the latch in the unlocked position before aligning the connector and pressing it until it clicks into place. Once installed, the latch should be moved to the locked position. The IC200BEM003 operates on a linear bus architecture that requires active bus termination at both ends for optimum performance. Devices connect directly to the bus cable or through sub lines as per application requirements. Status indication is facilitated via LED lights that confirm proper module functionality. Key specifications include support for up to 125 PROFIBUS-DP slave devices, a 9-pin D-sub connector, and a network data rate range from 9.6 Kbaud to 12 Mbaud, with a power consumption of 450 mA from a 5 V output.