{"title":"FRENIC-MEGA (G2)","description":"\u003ch2\u003eFuji Electric FRENIC-MEGA (G2) Advanced Variable Frequency Drives\u003c\/h2\u003e \u003cp\u003eThe \u003cstrong\u003eFRENIC-MEGA (G2)\u003c\/strong\u003e is the current generation of Fuji Electric's flagship drive platform, covering \u003cstrong\u003e1\/2 HP to 1200 HP\u003c\/strong\u003e on 230 V, 400 V and 460 V supplies. It is the recommended platform for new installations and the designated replacement path for several discontinued FRENIC series.\u003c\/p\u003e \u003ch3\u003eThree advances over the G1 platform\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003ePermanent magnet motor support.\u003c\/strong\u003e The G2 natively drives both Interior PM (IPM) and Surface PM (SPM) motors, so a machine can be built around a high-efficiency PM motor and reach system efficiency well beyond a standard induction motor installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBuilt-in Safe Torque Off.\u003c\/strong\u003e STO is certified to SIL2\/PLd and satisfies IEC 62061 and ISO 13849, which removes external safety contactors from many machine safety architectures and shrinks both panel cost and wiring.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh-response vector control.\u003c\/strong\u003e Fast torque response with or without encoder feedback, suiting precision machinery and servo-like positioning duties that previously needed a separate servo amplifier.\u003c\/p\u003e \u003ch3\u003eConnectivity and construction\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eRS-485 Modbus RTU standard; optional PROFIBUS-DP, DeviceNet, EtherNet\/IP, CC-Link and PROFINET\u003c\/li\u003e \u003cli\u003eEnhanced EMC performance and extended operating temperature range\u003c\/li\u003e \u003cli\u003eImproved cooling design and comprehensive on-board diagnostics\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTypical applications\u003c\/h3\u003e \u003cp\u003eSafety-rated machinery requiring certified STO, PM motor retrofits and new high-efficiency designs, precision positioning and indexing, extruders and winders, and any line being brought into an Industry 4.0 data architecture. UL\/cUL listed and CE marked. If you are replacing a FRENIC-Eco F1 or FRENIC-HVAC AR1 unit, ask us for the G2 cross-reference and any parameter mapping you will need.\u003c\/p\u003e","products":[{"product_id":"fuji-electric-tp-e1u","title":"Fuji Electric TP-E1U","description":"\u003cp\u003eThe Fuji Electric TP-E1U is a NEMA\/UL Type 1 enclosure conversion kit for the FRENIC-MEGA (G2) variable frequency drive (VFD). Installing this kit upgrades the drive's ingress protection to NEMA\/UL Type 1 (IP20 equivalent), protecting against contact with internal components and limited falling dirt — meeting NEC and UL requirements for drives in indoor open-type locations.\u003c\/p\u003e\u003cp\u003eNEMA Type 1 compliance is commonly required by electrical inspectors for drives installed outside a separate enclosure. The TP-E1U is engineered to fit the specific frame size of the FRENIC-MEGA (G2) drive without affecting thermal performance or voiding the UL listing.\u003c\/p\u003e\u003cp\u003eMultiple kit variants are available — verify the correct part number for your drive frame size and voltage class.\u003c\/p\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128202866924,"sku":"TP-E1U","price":71.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/MEGA_G2_b1fac70a-4734-4ad7-afcc-bc8d692a412e.png?v=1786028013"},{"product_id":"fuji-electric-db3-7-4c","title":"Fuji Electric DB3.7-4C","description":"\u003cp\u003eThe Fuji Electric DB3.7-4C is a Dynamic Braking Resistor for the FRENIC-MEGA (G2) variable frequency drive (VFD). Rated for , handling repeated deceleration cycles.\u003c\/p\u003e\u003cp\u003eWhen a VFD rapidly decelerates a motor, the motor becomes a generator returning energy to the DC bus. Without a braking resistor this regenerative energy causes bus voltage to rise and trip an overvoltage fault. The DB3.7-4C dissipates this energy as heat, enabling fast, repeatable, controlled deceleration.\u003c\/p\u003e\u003cp\u003eEssential for hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install with adequate ventilation. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128202932460,"sku":"DB3.7-4C","price":147.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/MEGA_G2_908cc89f-72dd-4b1b-aeca-df551a17551f.png?v=1786028013"},{"product_id":"fuji-electric-db3-7-2c","title":"Fuji Electric DB3.7-2C","description":"\u003cp\u003eThe Fuji Electric DB3.7-2C is a dynamic braking resistor sized for 3.7 kW (5 HP) Fuji Electric variable frequency drives on 200V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB3.7-2C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.7 kW (5 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128203096300,"sku":"DB3.7-2C","price":121.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db3-7-2c-865.jpg?v=1787265468"},{"product_id":"fuji-electric-pb-f1-15","title":"Fuji Electric PB-F1-15","description":"\u003cp\u003eThe Fuji Electric PB-F1-15 is an optional accessory for the FRENIC-MEGA (G2) variable frequency drive (VFD): External Heat Sink Cooling Adapter.\u003c\/p\u003e\u003cp\u003eGenuine Fuji Electric OEM accessory, factory-tested for full FRENIC-MEGA (G2) drive compatibility, maintaining UL\/cUL listing and CE marking when installed per manufacturer instructions.\u003c\/p\u003e\u003cp\u003eConsult the FRENIC-MEGA (G2) instruction manual and accessory datasheet to confirm compatibility with your drive model, firmware, and enclosure size before installation.\u003c\/p\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128203260140,"sku":"PB-F1-15","price":38.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/MEGA_G2_24313680-5c26-49d8-8d1b-a5b9ad91587c.png?v=1786028013"},{"product_id":"fuji-electric-db5-5-2c","title":"Fuji Electric DB5.5-2C","description":"\u003cp\u003eThe Fuji Electric DB5.5-2C is a Dynamic Braking Resistor for the FRENIC-MEGA (G2) variable frequency drive (VFD). Rated for , handling repeated deceleration cycles.\u003c\/p\u003e\u003cp\u003eWhen a VFD rapidly decelerates a motor, the motor becomes a generator returning energy to the DC bus. Without a braking resistor this regenerative energy causes bus voltage to rise and trip an overvoltage fault. The DB5.5-2C dissipates this energy as heat, enabling fast, repeatable, controlled deceleration.\u003c\/p\u003e\u003cp\u003eEssential for hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install with adequate ventilation. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128203423980,"sku":"DB5.5-2C","price":193.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/MEGA_G2_ed936c77-c665-438c-a5a7-787a624cc6ca.png?v=1786028015"},{"product_id":"fuji-electric-cb-3s","title":"Fuji Electric CB-3S","description":"\u003cp\u003eThe Fuji Electric CB-3S is a remote keypad extension cable for Fuji Electric FRENIC series variable frequency drives, including the FRENIC-MEGA (G2). It connects the drive's removable keypad to a remote mounting location, such as an enclosure door or a dedicated operator station, so the full keypad interface (parameter navigation, speed reference, run\/stop control, and fault monitoring) remains accessible when the drive itself is mounted in an inaccessible location.\u003c\/p\u003e\u003cp\u003eInstallation is plug-and-play with no configuration required. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRemote keypad extension cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRemote mounting of the drive keypad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone required (plug-and-play)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128203981036,"sku":"CB-3S","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-cb-3s-454.jpg?v=1787265825"},{"product_id":"fuji-electric-db11-4c","title":"Fuji Electric DB11-4C","description":"\u003cp\u003eThe Fuji Electric DB11-4C is a dynamic braking resistor sized for 11 kW (15 HP) Fuji Electric variable frequency drives on 400V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB11-4C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11 kW (15 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128204079340,"sku":"DB11-4C","price":306.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db11-4c-109.jpg?v=1787265843"},{"product_id":"fuji-electric-cb-1s","title":"Fuji Electric CB-1S","description":"\u003cp\u003eThe Fuji Electric CB-1S is a remote keypad extension cable for Fuji Electric FRENIC series variable frequency drives, including the FRENIC-MEGA (G2). It connects the drive's removable keypad to a remote mounting location, such as an enclosure door or a dedicated operator station, so the full keypad interface (parameter navigation, speed reference, run\/stop control, and fault monitoring) remains accessible when the drive itself is mounted in an inaccessible location.\u003c\/p\u003e\u003cp\u003eInstallation is plug-and-play with no configuration required. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRemote keypad extension cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRemote mounting of the drive keypad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone required (plug-and-play)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128204112108,"sku":"CB-1S","price":33.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-cb-1s-262.jpg?v=1787265884"},{"product_id":"fuji-electric-nema1-160g1-4","title":"Fuji Electric NEMA1-160G1-4","description":"\u003cp\u003eThe Fuji Electric NEMA1-160G1-4 is a NEMA\/UL Type 1 enclosure conversion kit for FRENIC-MEGA series variable frequency drives. Installing the kit upgrades the drive's ingress protection to NEMA\/UL Type 1, protecting against incidental contact with internal components and limited amounts of falling dirt, which satisfies common NEC and inspector requirements for drives installed in indoor open-type locations outside a separate enclosure.\u003c\/p\u003e\u003cp\u003eThe kit is sized for a specific drive frame; the 160G1 designation in the part number identifies the matching frame and voltage class. It installs in the field without affecting the drive's thermal performance or UL listing. Multiple kit variants exist, so verify the correct part number for your drive model before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 enclosure conversion kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e160G1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Rating Achieved\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eField-installed on matching drive frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128204570860,"sku":"NEMA1-160G1-4","price":1045.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-nema1-160g1-4-956.jpg?v=1787266019"},{"product_id":"fuji-electric-nema1-22g1-2","title":"Fuji Electric NEMA1-22G1-2","description":"\u003cp\u003eThe Fuji Electric NEMA1-22G1-2 is a NEMA\/UL Type 1 enclosure conversion kit for FRENIC-MEGA series variable frequency drives. Installing the kit upgrades the drive's ingress protection to NEMA\/UL Type 1, protecting against incidental contact with internal components and limited amounts of falling dirt, which satisfies common NEC and inspector requirements for drives installed in indoor open-type locations outside a separate enclosure.\u003c\/p\u003e\u003cp\u003eThe kit is sized for a specific drive frame; the 22G1 designation in the part number identifies the matching frame and voltage class. It installs in the field without affecting the drive's thermal performance or UL listing. Multiple kit variants exist, so verify the correct part number for your drive model before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 enclosure conversion kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22G1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Rating Achieved\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eField-installed on matching drive frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128204734700,"sku":"NEMA1-22G1-2","price":89.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-nema1-22g1-2-339.jpg?v=1787266081"},{"product_id":"fuji-electric-nema1-110g1-4","title":"Fuji Electric NEMA1-110G1-4","description":"\u003cp\u003eThe Fuji Electric NEMA1-110G1-4 is a NEMA\/UL Type 1 enclosure conversion kit for the FRENIC-MEGA (G2) variable frequency drive (VFD). Installing this kit upgrades the drive's ingress protection to NEMA\/UL Type 1 (IP20 equivalent), protecting against contact with internal components and limited falling dirt — meeting NEC and UL requirements for drives in indoor open-type locations.\u003c\/p\u003e\u003cp\u003eNEMA Type 1 compliance is commonly required by electrical inspectors for drives installed outside a separate enclosure. The NEMA1-110G1-4 is engineered to fit the specific frame size of the FRENIC-MEGA (G2) drive without affecting thermal performance or voiding the UL listing.\u003c\/p\u003e\u003cp\u003eMultiple kit variants are available — verify the correct part number for your drive frame size and voltage class.\u003c\/p\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128204931308,"sku":"NEMA1-110G1-4","price":836.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/MEGA_G2_7e0929ab-8c97-434a-a025-555db2a46468.png?v=1786028015"},{"product_id":"fuji-electric-db2-2-4c","title":"Fuji Electric DB2.2-4C","description":"\u003cp\u003eThe Fuji Electric DB2.2-4C is a dynamic braking resistor sized for 2.2 kW (3 HP) Fuji Electric variable frequency drives on 400V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB2.2-4C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128204898540,"sku":"DB2.2-4C","price":100.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db2-2-4c-288.jpg?v=1787266156"},{"product_id":"fuji-electric-opc-aio","title":"Fuji Electric OPC-AIO","description":"\u003cp\u003eThe Fuji Electric OPC-AIO is an analog input\/output interface card for the FRENIC-MEGA (G2) variable frequency drive (VFD). It adds one 0-10 VDC analog input, one 4-20 mA analog input, one 0-10 VDC analog output, and one 4-20 mA analog output, expanding the drive's analog interface for process control, PID feedback, and instrumentation signals.\u003c\/p\u003e\u003cp\u003eGenuine Fuji Electric OEM option card, factory-tested for FRENIC-MEGA (G2) drive compatibility. It installs in the drive's option slot with no external signal converters required, and the drive's UL\/cUL listing and CE marking are maintained when installed per manufacturer instructions. Consult the drive instruction manual and option datasheet to confirm compatibility with your drive model and firmware version before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOPC-AIO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAnalog input\/output interface card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAnalog Inputs Added\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x 0-10 VDC, 1 x 4-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAnalog Outputs Added\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x 0-10 VDC, 1 x 4-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug-in card for the drive option slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128205062380,"sku":"OPC-AIO","price":302.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-opc-aio-658.jpg?v=1787266180"},{"product_id":"fuji-electric-db15-4c","title":"Fuji Electric DB15-4C","description":"\u003cp\u003eThe Fuji Electric DB15-4C is a dynamic braking resistor sized for 15 kW (20 HP) Fuji Electric variable frequency drives on 400V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB15-4C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 kW (20 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128205193452,"sku":"DB15-4C","price":520.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db15-4c-902.jpg?v=1787266263"},{"product_id":"fuji-electric-db0-75-2c","title":"Fuji Electric DB0.75-2C","description":"\u003cp\u003eThe Fuji Electric DB0.75-2C is a dynamic braking resistor sized for 0.75 kW (1 HP) Fuji Electric variable frequency drives on 200V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB0.75-2C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.75 kW (1 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128205226220,"sku":"DB0.75-2C","price":67.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db0-75-2c-474.jpg?v=1787266272"},{"product_id":"fuji-electric-db15-2c","title":"Fuji Electric DB15-2C","description":"\u003cp\u003eThe Fuji Electric DB15-2C is a dynamic braking resistor sized for 15 kW (20 HP) Fuji Electric variable frequency drives on 200V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB15-2C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 kW (20 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128205619436,"sku":"DB15-2C","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db15-2c-894.jpg?v=1787266424"},{"product_id":"fuji-electric-db2-2-2c","title":"Fuji Electric DB2.2-2C","description":"\u003cp\u003eThe Fuji Electric DB2.2-2C is a dynamic braking resistor sized for 2.2 kW (3 HP) Fuji Electric variable frequency drives on 200V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB2.2-2C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128205684972,"sku":"DB2.2-2C","price":92.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db2-2-2c-586.jpg?v=1787266440"},{"product_id":"fuji-electric-db5-5-4c","title":"Fuji Electric DB5.5-4C","description":"\u003cp\u003eThe Fuji Electric DB5.5-4C is a dynamic braking resistor sized for 5.5 kW (7.5 HP) Fuji Electric variable frequency drives on 400V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB5.5-4C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.5 kW (7.5 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128206110956,"sku":"DB5.5-4C","price":193.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db5-5-4c-719.jpg?v=1787266596"},{"product_id":"fuji-electric-db11-2c","title":"Fuji Electric DB11-2C","description":"\u003cp\u003eThe Fuji Electric DB11-2C is a dynamic braking resistor sized for 11 kW (15 HP) Fuji Electric variable frequency drives on 200V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB11-2C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11 kW (15 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128206176492,"sku":"DB11-2C","price":281.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db11-2c-256.jpg?v=1787266624"},{"product_id":"fuji-electric-cb-5s","title":"Fuji Electric CB-5S","description":"\u003cp\u003eThe Fuji Electric CB-5S is a remote keypad extension cable for Fuji Electric FRENIC series variable frequency drives, including the FRENIC-MEGA (G2). It connects the drive's removable keypad to a remote mounting location, such as an enclosure door or a dedicated operator station, so the full keypad interface (parameter navigation, speed reference, run\/stop control, and fault monitoring) remains accessible when the drive itself is mounted in an inaccessible location.\u003c\/p\u003e\u003cp\u003eInstallation is plug-and-play with no configuration required. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRemote keypad extension cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRemote mounting of the drive keypad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone required (plug-and-play)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128206307564,"sku":"CB-5S","price":50.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-cb-5s-220.jpg?v=1787266645"},{"product_id":"fuji-electric-opc-cop2","title":"Fuji Electric OPC-COP2","description":"\u003cp\u003eThe Fuji Electric OPC-COP2 is a CANopen communication option card for the FRENIC-MEGA (G2) variable frequency drive (VFD). It connects the drive to a CANopen fieldbus network, allowing speed reference, run\/stop commands, status, and fault data to be exchanged with the network master without separate I\/O wiring.\u003c\/p\u003e\u003cp\u003eGenuine Fuji Electric OEM option card, factory-tested for FRENIC-MEGA (G2) drive compatibility. It installs in the drive's option slot with no external signal converters required, and the drive's UL\/cUL listing and CE marking are maintained when installed per manufacturer instructions. Consult the drive instruction manual and option datasheet to confirm compatibility with your drive model and firmware version before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOPC-COP2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCANopen communication option card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork Protocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCANopen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eData Access\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSpeed reference, run\/stop, status, monitoring, and fault data over the network\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug-in card for the drive option slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128206373100,"sku":"OPC-COP2","price":1091.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-opc-cop2-105.jpg?v=1787266672"},{"product_id":"fuji-electric-db7-5-4c","title":"Fuji Electric DB7.5-4C","description":"\u003cp\u003eThe Fuji Electric DB7.5-4C is a dynamic braking resistor sized for 7.5 kW (10 HP) Fuji Electric variable frequency drives on 400V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB7.5-4C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.5 kW (10 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128206438636,"sku":"DB7.5-4C","price":214.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db7-5-4c-377.jpg?v=1787266678"},{"product_id":"fuji-electric-db7-5-2c","title":"Fuji Electric DB7.5-2C","description":"\u003cp\u003eThe Fuji Electric DB7.5-2C is a dynamic braking resistor sized for 7.5 kW (10 HP) Fuji Electric variable frequency drives on 200V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB7.5-2C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.5 kW (10 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128206471404,"sku":"DB7.5-2C","price":218.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db7-5-2c-285.jpg?v=1787266685"},{"product_id":"fuji-electric-pb-f1-30","title":"Fuji Electric PB-F1-30","description":"\u003cp\u003eThe Fuji Electric PB-F1-30 is a mounting plate accessory for FRENIC-Eco (F1) series variable frequency drives, sized for the 30 kW-class drive frame. It provides the mechanical adapter plate used when installing or retrofitting the drive in an enclosure or panel cutout matched to that frame size.\u003c\/p\u003e\u003cp\u003eThe FRENIC-Eco (F1) series is discontinued; this accessory supports installed-base drives and remaining stock. Verify the correct part number for your drive frame size before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePB-F1-30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting plate accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-Eco (F1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 kW-class F1 drive frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128206668012,"sku":"PB-F1-30","price":41.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-pb-f1-30-132.jpg?v=1787266724"},{"product_id":"fuji-electric-opc-ccl","title":"Fuji Electric OPC-CCL","description":"\u003cp\u003eThe Fuji Electric OPC-CCL is a CC-Link communication option card for the FRENIC-MEGA (G2) variable frequency drive (VFD). It connects the drive to a CC-Link fieldbus network, allowing speed reference, run\/stop commands, status, and fault data to be exchanged with a PLC or DCS master without separate I\/O wiring. Drive data such as operating frequency, output current, DC bus voltage, and fault history is available to the network master for remote monitoring and maintenance.\u003c\/p\u003e\u003cp\u003eGenuine Fuji Electric OEM option card, factory-tested for FRENIC-MEGA (G2) drive compatibility. It installs in the drive's option slot with no external signal converters required, and the drive's UL\/cUL listing and CE marking are maintained when installed per manufacturer instructions. Consult the drive instruction manual and option datasheet to confirm compatibility with your drive model and firmware version before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOPC-CCL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCC-Link communication option card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork Protocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCC-Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eData Access\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSpeed reference, run\/stop, status, monitoring, and fault data over the network\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug-in card for the drive option slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128206733548,"sku":"OPC-CCL","price":713.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-opc-ccl-647.jpg?v=1787266732"},{"product_id":"fuji-electric-opc-dev","title":"Fuji Electric OPC-DEV","description":"\u003cp\u003eThe Fuji Electric OPC-DEV is a DeviceNet communication option card for the FRENIC-MEGA (G2) variable frequency drive (VFD). Enables the drive to communicate on a DeviceNet network, integrating into PLC or DCS architectures without separate I\/O wiring for speed reference, run\/stop, status, and fault data.\u003c\/p\u003e\u003cp\u003eProvides rich drive data — operating frequency, output current, DC bus voltage, fault history — directly to the network master, supporting remote monitoring and predictive maintenance.\u003c\/p\u003e\u003cp\u003ePlugs into the drive's option slot. Genuine Fuji Electric OEM card, UL listing maintained.\u003c\/p\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128206799084,"sku":"OPC-DEV","price":839.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/MEGA_G2_3fbfb1fd-cac7-478c-8041-b65ac9751711.png?v=1786028017"},{"product_id":"fuji-electric-nema1-75g1-2","title":"Fuji Electric NEMA1-75G1-2","description":"\u003cp\u003eThe Fuji Electric NEMA1-75G1-2 is a NEMA\/UL Type 1 enclosure conversion kit for the FRENIC-MEGA variable frequency drive (VFD). Installing this kit upgrades the drive's ingress protection to NEMA\/UL Type 1, protecting against incidental contact with internal components and limited falling dirt, and meeting NEC and UL requirements for drives installed in indoor open-type locations.\u003c\/p\u003e\u003cp\u003eNEMA Type 1 compliance is commonly required by electrical inspectors when a drive is installed outside a separate enclosure. The NEMA1-75G1-2 is engineered to fit a specific FRENIC-MEGA frame size without affecting thermal performance or voiding the UL listing. Multiple kit variants exist, so verify the correct part number for your drive frame size and voltage class before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA1-75G1-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 enclosure conversion kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA VFD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Rating Achieved\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 (IP20 equivalent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrive Voltage Class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 V class (200-240 VAC three-phase)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSized for a specific FRENIC-MEGA capacity frame; match the kit number to the drive model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAttaches directly to the drive chassis; conduit entry provisions included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL listing of the drive maintained when installed per instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128208208108,"sku":"NEMA1-75G1-2","price":776.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-nema1-75g1-2-568.jpg?v=1787267024"},{"product_id":"fuji-electric-nema1-37g1-24","title":"Fuji Electric NEMA1-37G1-24","description":"\u003cp\u003eThe Fuji Electric NEMA1-37G1-24 is a NEMA\/UL Type 1 enclosure conversion kit for FRENIC-MEGA series variable frequency drives. Installing the kit upgrades the drive's ingress protection to NEMA\/UL Type 1, protecting against incidental contact with internal components and limited amounts of falling dirt, which satisfies common NEC and inspector requirements for drives installed in indoor open-type locations outside a separate enclosure.\u003c\/p\u003e\u003cp\u003eThe kit is sized for a specific drive frame; the 37G1 designation in the part number identifies the matching frame and voltage class. It installs in the field without affecting the drive's thermal performance or UL listing. Multiple kit variants exist, so verify the correct part number for your drive model before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 enclosure conversion kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e37G1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Rating Achieved\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eField-installed on matching drive frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128208240876,"sku":"NEMA1-37G1-24","price":392.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-nema1-37g1-24-188.jpg?v=1787267031"},{"product_id":"fuji-electric-nema1-630g1-4","title":"Fuji Electric NEMA1-630G1-4","description":"\u003cp\u003eThe Fuji Electric NEMA1-630G1-4 is a NEMA\/UL Type 1 enclosure conversion kit for the FRENIC-MEGA variable frequency drive (VFD). Installing this kit upgrades the drive's ingress protection to NEMA\/UL Type 1, protecting against incidental contact with internal components and limited falling dirt, and meeting NEC and UL requirements for drives installed in indoor open-type locations.\u003c\/p\u003e\u003cp\u003eNEMA Type 1 compliance is commonly required by electrical inspectors when a drive is installed outside a separate enclosure. The NEMA1-630G1-4 is engineered to fit a specific FRENIC-MEGA frame size without affecting thermal performance or voiding the UL listing. Multiple kit variants exist, so verify the correct part number for your drive frame size and voltage class before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA1-630G1-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 enclosure conversion kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA VFD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Rating Achieved\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 (IP20 equivalent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrive Voltage Class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400 V class (380-480 VAC three-phase)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSized for a specific FRENIC-MEGA capacity frame; match the kit number to the drive model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAttaches directly to the drive chassis; conduit entry provisions included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL listing of the drive maintained when installed per instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128208306412,"sku":"NEMA1-630G1-4","price":1025.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-nema1-630g1-4-249.jpg?v=1787267038"},{"product_id":"fuji-electric-nema1-220g1-24","title":"Fuji Electric NEMA1-220G1-24","description":"\u003cp\u003eThe Fuji Electric NEMA1-220G1-24 is a NEMA\/UL Type 1 enclosure conversion kit for FRENIC-MEGA series variable frequency drives. Installing the kit upgrades the drive's ingress protection to NEMA\/UL Type 1, protecting against incidental contact with internal components and limited amounts of falling dirt, which satisfies common NEC and inspector requirements for drives installed in indoor open-type locations outside a separate enclosure.\u003c\/p\u003e\u003cp\u003eThe kit is sized for a specific drive frame; the 220G1 designation in the part number identifies the matching frame and voltage class. It installs in the field without affecting the drive's thermal performance or UL listing. Multiple kit variants exist, so verify the correct part number for your drive model before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 enclosure conversion kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e220G1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Rating Achieved\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eField-installed on matching drive frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128208470252,"sku":"NEMA1-220G1-24","price":937.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-nema1-220g1-24-496.jpg?v=1787267060"},{"product_id":"fuji-electric-nema1-315g1-4","title":"Fuji Electric NEMA1-315G1-4","description":"\u003cp\u003eThe Fuji Electric NEMA1-315G1-4 is a NEMA\/UL Type 1 enclosure conversion kit for FRENIC-MEGA series variable frequency drives. Installing the kit upgrades the drive's ingress protection to NEMA\/UL Type 1, protecting against incidental contact with internal components and limited amounts of falling dirt, which satisfies common NEC and inspector requirements for drives installed in indoor open-type locations outside a separate enclosure.\u003c\/p\u003e\u003cp\u003eThe kit is sized for a specific drive frame; the 315G1 designation in the part number identifies the matching frame and voltage class. It installs in the field without affecting the drive's thermal performance or UL listing. Multiple kit variants exist, so verify the correct part number for your drive model before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 enclosure conversion kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e315G1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Rating Achieved\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eField-installed on matching drive frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128208503020,"sku":"NEMA1-315G1-4","price":527.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-nema1-315g1-4-310.jpg?v=1787267067"},{"product_id":"fuji-electric-nema1-0-75g1-24","title":"Fuji Electric NEMA1-0.75G1-24","description":"\u003cp\u003eThe Fuji Electric NEMA1-0.75G1-24 is a NEMA\/UL Type 1 enclosure conversion kit for FRENIC-MEGA series variable frequency drives. Installing the kit upgrades the drive's ingress protection to NEMA\/UL Type 1, protecting against incidental contact with internal components and limited amounts of falling dirt, which satisfies common NEC and inspector requirements for drives installed in indoor open-type locations outside a separate enclosure.\u003c\/p\u003e\u003cp\u003eThe kit is sized for a specific drive frame; the 0.75G1 designation in the part number identifies the matching frame and voltage class. It installs in the field without affecting the drive's thermal performance or UL listing. Multiple kit variants exist, so verify the correct part number for your drive model before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 enclosure conversion kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.75G1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Rating Achieved\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eField-installed on matching drive frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128208797932,"sku":"NEMA1-0.75G1-24","price":23.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-nema1-0-75g1-24-140.jpg?v=1787267089"},{"product_id":"fuji-electric-db30-4c","title":"Fuji Electric DB30-4C","description":"\u003cp\u003eThe Fuji Electric DB30-4C is a dynamic braking resistor sized for 30 kW (40 HP) Fuji Electric variable frequency drives on 400V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB30-4C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 kW (40 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128208994540,"sku":"DB30-4C","price":839.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db30-4c-570.jpg?v=1787267142"},{"product_id":"fuji-electric-db22-2c","title":"Fuji Electric DB22-2C","description":"\u003cp\u003eThe Fuji Electric DB22-2C is a Dynamic Braking Resistor for the FRENIC-MEGA (G2) variable frequency drive (VFD). Rated for , handling repeated deceleration cycles.\u003c\/p\u003e\u003cp\u003eWhen a VFD rapidly decelerates a motor, the motor becomes a generator returning energy to the DC bus. Without a braking resistor this regenerative energy causes bus voltage to rise and trip an overvoltage fault. The DB22-2C dissipates this energy as heat, enabling fast, repeatable, controlled deceleration.\u003c\/p\u003e\u003cp\u003eEssential for hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install with adequate ventilation. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128209125612,"sku":"DB22-2C","price":659.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/MEGA_G2_5e0315dc-ce7b-44d4-b299-5fe8168c0de6.png?v=1786028031"},{"product_id":"fuji-electric-db37-2c","title":"Fuji Electric DB37-2C","description":"\u003cp\u003eThe Fuji Electric DB37-2C is a dynamic braking resistor sized for 37 kW (50 HP) Fuji Electric variable frequency drives on 200V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB37-2C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e37 kW (50 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128209387756,"sku":"DB37-2C","price":1330.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db37-2c-863.jpg?v=1787267223"},{"product_id":"fuji-electric-frn0032g2s-2gu","title":"Fuji Electric FRN0032G2S-2GU","description":"\u003cp\u003eThe Fuji Electric FRN0032G2S-2GU is a FRENIC-MEGA (G2) series high-performance variable frequency drive (VFD) for three-phase 200 to 240 VAC input, rated 10 HP \/ 31.8 A Normal Duty and 7.5 HP \/ 27 A Heavy Duty. The FRENIC-MEGA G2 is Fuji Electric's flagship industrial drive platform, used on machine tools, cranes and hoists, extruders, winders, and other demanding constant-torque machinery as well as general-purpose loads.\u003c\/p\u003e\u003cp\u003eThe G2 generation adds native support for permanent magnet motors (both interior and surface PM types) alongside standard induction motors, and integrates Safe Torque Off (STO) certified to SIL2 \/ PL d, which can eliminate external safety contactors in many machine safety architectures. High-response vector control provides fast torque response and precise speed regulation, with RS-485 Modbus RTU standard and optional fieldbus interface cards.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFRN0032G2S-2GU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHigh-performance variable frequency drive (VFD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal Duty Rating\u003c\/td\u003e\n\u003ctd\u003e10 HP \/ 31.8 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeavy Duty Rating\u003c\/td\u003e\n\u003ctd\u003e7.5 HP \/ 27 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e200 to 240 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Phase\u003c\/td\u003e\n\u003ctd\u003eThree-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003eThree-phase 200 to 240 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Support\u003c\/td\u003e\n\u003ctd\u003eInduction motors and permanent magnet (IPM\/SPM) motors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Methods\u003c\/td\u003e\n\u003ctd\u003eV\/f, dynamic torque vector, sensorless vector, vector with speed feedback (option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctional Safety\u003c\/td\u003e\n\u003ctd\u003eSafe Torque Off (STO), SIL2 \/ PL d\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunications\u003c\/td\u003e\n\u003ctd\u003eRS-485 (Modbus RTU) standard; optional fieldbus cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128209453292,"sku":"FRN0032G2S-2GU","price":1205.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-frn0032g2s-2gu-865.jpg?v=1787267230"},{"product_id":"fuji-electric-db200-4c","title":"Fuji Electric DB200-4C","description":"\u003cp\u003eThe Fuji Electric DB200-4C is a Dynamic Braking Resistor for the FRENIC-MEGA (G2) variable frequency drive (VFD). Rated for , handling repeated deceleration cycles.\u003c\/p\u003e\u003cp\u003eWhen a VFD rapidly decelerates a motor, the motor becomes a generator returning energy to the DC bus. Without a braking resistor this regenerative energy causes bus voltage to rise and trip an overvoltage fault. The DB200-4C dissipates this energy as heat, enabling fast, repeatable, controlled deceleration.\u003c\/p\u003e\u003cp\u003eEssential for hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install with adequate ventilation. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128209518828,"sku":"DB200-4C","price":4263.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/MEGA_G2_afb88f65-0f8a-4bfb-8db2-654a8fe33599.png?v=1786028033"},{"product_id":"fuji-electric-nema1-400g1-4","title":"Fuji Electric NEMA1-400G1-4","description":"\u003cp\u003eThe Fuji Electric NEMA1-400G1-4 is a NEMA\/UL Type 1 enclosure conversion kit for FRENIC-MEGA series variable frequency drives. Installing the kit upgrades the drive's ingress protection to NEMA\/UL Type 1, protecting against incidental contact with internal components and limited amounts of falling dirt, which satisfies common NEC and inspector requirements for drives installed in indoor open-type locations outside a separate enclosure.\u003c\/p\u003e\u003cp\u003eThe kit is sized for a specific drive frame; the 400G1 designation in the part number identifies the matching frame and voltage class. It installs in the field without affecting the drive's thermal performance or UL listing. Multiple kit variants exist, so verify the correct part number for your drive model before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 enclosure conversion kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400G1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Rating Achieved\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eField-installed on matching drive frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128209551596,"sku":"NEMA1-400G1-4","price":609.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-nema1-400g1-4-597.jpg?v=1787267238"},{"product_id":"fuji-electric-frn0003g2s-2gu","title":"Fuji Electric FRN0003G2S-2GU","description":"\u003cp\u003eThe Fuji Electric FRN0003G2S-2GU is a FRENIC-MEGA (G2) series high-performance variable frequency drive (VFD) for 230 VAC three-phase applications, rated 1\/2 HP (Normal Duty) and 1\/2 HP \/ 3 A (Heavy Duty). The FRENIC-MEGA G2 is Fuji Electric's flagship general-industry drive, built for demanding applications that need precise motor control, machine safety functions, and broad connectivity.\u003c\/p\u003e\u003cp\u003eThe G2 generation adds native support for permanent magnet (PM) motors, both interior PM (IPM) and surface PM (SPM), enabling high-efficiency PM motor systems, and includes built-in Safe Torque Off (STO, SIL2\/PLd certified) which eliminates external safety contactors in many machine safety architectures per IEC 62061 and ISO 13849. V\/f, dynamic torque vector, sensorless vector, and closed-loop vector control modes cover applications from simple fans to demanding hoists and winders.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-performance variable frequency drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNormal Duty rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/2 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeavy Duty rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/2 HP \/ 3 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThree-phase 230 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInduction motors and PM motors (IPM\/SPM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunctional safety\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSafe Torque Off (STO), SIL2 \/ PLd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl methods\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eV\/f, dynamic torque vector, sensorless vector, closed-loop vector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCommunications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRS-485 (Modbus RTU) standard; optional fieldbus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128209649900,"sku":"FRN0003G2S-2GU","price":624.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-frn0003g2s-2gu-551.jpg?v=1787267244"},{"product_id":"fuji-electric-frn0008g2s-2gu","title":"Fuji Electric FRN0008G2S-2GU","description":"\u003cp\u003eThe Fuji Electric FRN0008G2S-2GU is a FRENIC-MEGA (G2) series high-performance variable frequency drive (VFD) for three-phase 200 to 240 VAC input. The FRENIC-MEGA G2 is Fuji Electric's flagship industrial drive platform, used on machine tools, cranes and hoists, extruders, winders, and other demanding constant-torque machinery as well as general-purpose loads.\u003c\/p\u003e\u003cp\u003eThe G2 generation adds native support for permanent magnet motors (both interior and surface PM types) alongside standard induction motors, and integrates Safe Torque Off (STO) certified to SIL2 \/ PL d, which can eliminate external safety contactors in many machine safety architectures. High-response vector control provides fast torque response and precise speed regulation, with RS-485 Modbus RTU standard and optional fieldbus interface cards.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFRN0008G2S-2GU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHigh-performance variable frequency drive (VFD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeavy Duty Rating\u003c\/td\u003e\n\u003ctd\u003e2 HP \/ 8 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e200 to 240 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Phase\u003c\/td\u003e\n\u003ctd\u003eThree-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003eThree-phase 200 to 240 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Support\u003c\/td\u003e\n\u003ctd\u003eInduction motors and permanent magnet (IPM\/SPM) motors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Methods\u003c\/td\u003e\n\u003ctd\u003eV\/f, dynamic torque vector, sensorless vector, vector with speed feedback (option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctional Safety\u003c\/td\u003e\n\u003ctd\u003eSafe Torque Off (STO), SIL2 \/ PL d\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunications\u003c\/td\u003e\n\u003ctd\u003eRS-485 (Modbus RTU) standard; optional fieldbus cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128209715436,"sku":"FRN0008G2S-2GU","price":733.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-frn0008g2s-2gu-741.jpg?v=1787267252"},{"product_id":"fuji-electric-db22-4c","title":"Fuji Electric DB22-4C","description":"\u003cp\u003eThe Fuji Electric DB22-4C is a dynamic braking resistor sized for 22 kW (30 HP) Fuji Electric variable frequency drives on 400V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB22-4C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22 kW (30 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128209846508,"sku":"DB22-4C","price":704.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db22-4c-866.jpg?v=1787267272"},{"product_id":"fuji-electric-frn0005g2s-2gu","title":"Fuji Electric FRN0005G2S-2GU","description":"\u003cp\u003eThe Fuji Electric FRN0005G2S-2GU is a FRENIC-MEGA (G2) series high-performance variable frequency drive (VFD) for three-phase 200 to 240 VAC input. The FRENIC-MEGA G2 is Fuji Electric's flagship industrial drive platform, used on machine tools, cranes and hoists, extruders, winders, and other demanding constant-torque machinery as well as general-purpose loads.\u003c\/p\u003e\u003cp\u003eThe G2 generation adds native support for permanent magnet motors (both interior and surface PM types) alongside standard induction motors, and integrates Safe Torque Off (STO) certified to SIL2 \/ PL d, which can eliminate external safety contactors in many machine safety architectures. High-response vector control provides fast torque response and precise speed regulation, with RS-485 Modbus RTU standard and optional fieldbus interface cards.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFRN0005G2S-2GU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHigh-performance variable frequency drive (VFD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeavy Duty Rating\u003c\/td\u003e\n\u003ctd\u003e1 HP \/ 5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e200 to 240 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Phase\u003c\/td\u003e\n\u003ctd\u003eThree-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003eThree-phase 200 to 240 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Support\u003c\/td\u003e\n\u003ctd\u003eInduction motors and permanent magnet (IPM\/SPM) motors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Methods\u003c\/td\u003e\n\u003ctd\u003eV\/f, dynamic torque vector, sensorless vector, vector with speed feedback (option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctional Safety\u003c\/td\u003e\n\u003ctd\u003eSafe Torque Off (STO), SIL2 \/ PL d\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunications\u003c\/td\u003e\n\u003ctd\u003eRS-485 (Modbus RTU) standard; optional fieldbus cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128209944812,"sku":"FRN0005G2S-2GU","price":686.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-frn0005g2s-2gu-456.jpg?v=1787267295"},{"product_id":"fuji-electric-nema1-0-4g1-24","title":"Fuji Electric NEMA1-0.4G1-24","description":"\u003cp\u003eThe Fuji Electric NEMA1-0.4G1-24 is a NEMA\/UL Type 1 enclosure conversion kit for FRENIC-MEGA series variable frequency drives. Installing the kit upgrades the drive's ingress protection to NEMA\/UL Type 1, protecting against incidental contact with internal components and limited amounts of falling dirt, which satisfies common NEC and inspector requirements for drives installed in indoor open-type locations outside a separate enclosure.\u003c\/p\u003e\u003cp\u003eThe kit is sized for a specific drive frame; the 0.4G1 designation in the part number identifies the matching frame and voltage class. It installs in the field without affecting the drive's thermal performance or UL listing. Multiple kit variants exist, so verify the correct part number for your drive model before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 enclosure conversion kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4G1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Rating Achieved\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eField-installed on matching drive frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128209977580,"sku":"NEMA1-0.4G1-24","price":21.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-nema1-0-4g1-24-441.jpg?v=1787267303"},{"product_id":"fuji-electric-tp-g1w-j1","title":"Fuji Electric TP-G1W-J1","description":"\u003cp\u003eThe Fuji Electric TP-G1W-J1 is the water-resistant version of the TP-G1-J1 multi-function LCD keypad for Fuji FRENIC series variable frequency drives, including FRENIC-MEGA and FRENIC-Eco models. The sealed front face allows the keypad to be mounted through an enclosure door in damp or dusty environments while providing full parameter access, real-time monitoring of output frequency, current, voltage, and fault status, plus run\/stop and speed reference control.\u003c\/p\u003e\u003cp\u003eThe keypad can be mounted remotely via an extension cable for panel door installation and supports parameter copy between drives. Genuine Fuji Electric OEM accessory; confirm compatibility with your specific drive model and firmware version before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTP-G1W-J1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater-resistant multi-function LCD keypad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA, FRENIC-Eco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBacklit LCD, text-based parameter display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunctions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eParameter access\/copy, monitoring, run\/stop, speed reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRemote \/ panel door mount via extension cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128210010348,"sku":"TP-G1W-J1","price":224.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-tp-g1w-j1-810.jpg?v=1787267311"},{"product_id":"fuji-electric-db45-4c","title":"Fuji Electric DB45-4C","description":"\u003cp\u003eThe Fuji Electric DB45-4C is a Dynamic Braking Resistor for the FRENIC-MEGA (G2) variable frequency drive (VFD). Rated for , handling repeated deceleration cycles.\u003c\/p\u003e\u003cp\u003eWhen a VFD rapidly decelerates a motor, the motor becomes a generator returning energy to the DC bus. Without a braking resistor this regenerative energy causes bus voltage to rise and trip an overvoltage fault. The DB45-4C dissipates this energy as heat, enabling fast, repeatable, controlled deceleration.\u003c\/p\u003e\u003cp\u003eEssential for hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install with adequate ventilation. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128210043116,"sku":"DB45-4C","price":1557.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/MEGA_G2_3b6a29a5-b642-4fc4-9eed-6ce1124726b9.png?v=1786028031"},{"product_id":"fuji-electric-nema1-75g1-24","title":"Fuji Electric NEMA1-75G1-24","description":"\u003cp\u003eThe Fuji Electric NEMA1-75G1-24 is a NEMA\/UL Type 1 enclosure conversion kit for the FRENIC-MEGA variable frequency drive (VFD). Installing this kit upgrades the drive's ingress protection to NEMA\/UL Type 1, protecting against incidental contact with internal components and limited falling dirt, and meeting NEC and UL requirements for drives installed in indoor open-type locations.\u003c\/p\u003e\u003cp\u003eNEMA Type 1 compliance is commonly required by electrical inspectors when a drive is installed outside a separate enclosure. The NEMA1-75G1-24 is engineered to fit a specific FRENIC-MEGA frame size without affecting thermal performance or voiding the UL listing. Multiple kit variants exist, so verify the correct part number for your drive frame size and voltage class before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA1-75G1-24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 enclosure conversion kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Drive Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA VFD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Rating Achieved\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA\/UL Type 1 (IP20 equivalent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrive Voltage Class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCovers both 200 V class and 400 V class drive frames\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSized for a specific FRENIC-MEGA capacity frame; match the kit number to the drive model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAttaches directly to the drive chassis; conduit entry provisions included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL listing of the drive maintained when installed per instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128210206956,"sku":"NEMA1-75G1-24","price":529.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-nema1-75g1-24-868.jpg?v=1787267334"},{"product_id":"fuji-electric-db37-4c","title":"Fuji Electric DB37-4C","description":"\u003cp\u003eThe Fuji Electric DB37-4C is a Dynamic Braking Resistor for the FRENIC-MEGA (G2) variable frequency drive (VFD). Rated for , handling repeated deceleration cycles.\u003c\/p\u003e\u003cp\u003eWhen a VFD rapidly decelerates a motor, the motor becomes a generator returning energy to the DC bus. Without a braking resistor this regenerative energy causes bus voltage to rise and trip an overvoltage fault. The DB37-4C dissipates this energy as heat, enabling fast, repeatable, controlled deceleration.\u003c\/p\u003e\u003cp\u003eEssential for hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install with adequate ventilation. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128210239724,"sku":"DB37-4C","price":1397.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/MEGA_G2_4412b724-fc35-4c9d-b532-5c7a6d4c680f.png?v=1786028033"},{"product_id":"fuji-electric-db75-4c","title":"Fuji Electric DB75-4C","description":"\u003cp\u003eThe Fuji Electric DB75-4C is a Dynamic Braking Resistor for the FRENIC-MEGA (G2) variable frequency drive (VFD). Rated for , handling repeated deceleration cycles.\u003c\/p\u003e\u003cp\u003eWhen a VFD rapidly decelerates a motor, the motor becomes a generator returning energy to the DC bus. Without a braking resistor this regenerative energy causes bus voltage to rise and trip an overvoltage fault. The DB75-4C dissipates this energy as heat, enabling fast, repeatable, controlled deceleration.\u003c\/p\u003e\u003cp\u003eEssential for hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install with adequate ventilation. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128210272492,"sku":"DB75-4C","price":2442.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/MEGA_G2_be61477f-bc10-4b77-9493-a0620c6ae6f6.png?v=1786028031"},{"product_id":"fuji-electric-db55-2c","title":"Fuji Electric DB55-2C","description":"\u003cp\u003eThe Fuji Electric DB55-2C is a dynamic braking resistor sized for 55 kW (75 HP) Fuji Electric variable frequency drives on 200V class supplies. It is the matching external braking resistor for FRENIC-MEGA (G2) and other FRENIC series drives, used together with the drive's built-in braking transistor or an external braking unit to absorb regenerative energy during deceleration.\u003c\/p\u003e\u003cp\u003eWhen a VFD decelerates a motor, the motor acts as a generator and returns energy to the drive's DC bus. Without a braking resistor this regenerative energy raises the bus voltage and trips an overvoltage fault. The DB55-2C dissipates that energy as heat, enabling fast, repeatable, controlled deceleration in hoists, cranes, centrifuges, high-inertia fans and pumps, and winding applications. Install in a well-ventilated location; the resistor generates significant heat during braking cycles. Genuine Fuji Electric OEM accessory.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic braking resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatched drive capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55 kW (75 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible drives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric FRENIC series VFDs including FRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDissipates regenerative braking energy as heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal mount, ventilated location required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128210305260,"sku":"DB55-2C","price":1750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-db55-2c-538.jpg?v=1787267341"},{"product_id":"fuji-electric-frn0059g2s-2gu","title":"Fuji Electric FRN0059G2S-2GU","description":"\u003cp\u003eCombining advanced PM motor support, integrated Safe Torque Off, and high-response vector control, the Fuji Electric FRN0059G2S-2GU is a FRENIC-MEGA (G2) series advanced variable frequency drive (VFD) for 230V three-phase applications, rated at 20 HP \/ 59.4A (Normal Duty), 15 HP \/ 49A (Heavy Duty).\u003c\/p\u003e\u003cp\u003eThe FRENIC-MEGA G2 generation introduces key advancements over the G1 platform: native support for permanent magnet (PM) motors — both Interior PM (IPM) and Surface PM (SPM) — enabling pairing with high-efficiency PM motors for system efficiency well above standard induction motor installations. Built-in Safe Torque Off (STO, SIL2\/PLd certified) eliminates external safety contactors in many machine safety architectures, meeting IEC 62061 and ISO 13849 requirements.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRN0059G2S-2GU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFRENIC-MEGA (G2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVariable Frequency Drive (VFD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage Class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200V class (208\/230VAC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput Phases\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThree-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNormal Duty Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 HP \/ 59.4 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeavy Duty Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 HP \/ 49 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl Methods\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eV\/f control, dynamic torque vector, sensorless vector, closed-loop vector (with option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor Types Supported\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInduction motors, IPM and SPM permanent magnet motors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSafety Function\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSafe Torque Off (STO), SIL2 \/ PL d\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCommunications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRS-485 Modbus RTU built in; optional EtherNet\/IP, PROFINET, PROFIBUS-DP, DeviceNet, CC-Link cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.1 to 590 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverload Capability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNormal Duty 120% for 1 min; Heavy Duty 150% for 1 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL Open Type (panel mount)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAgency Approvals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ecULus, CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48128210370796,"sku":"FRN0059G2S-2GU","price":1988.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/fuji-electric-frn0059g2s-2gu-135.jpg?v=1787267363"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/collections\/MEGA_G2_3ff5eed1-5811-409d-90ce-1580388784b9.png?v=1786026600","url":"https:\/\/www.industrialautomationco.com\/fr-ca\/collections\/frenic-mega-g2.oembed?page=3","provider":"Industrial Automation Co.","version":"1.0","type":"link"}