{"product_id":"ge-fanuc-ic694dsm324","title":"GE Fanuc IC694DSM324","description":"\u003cp\u003eThe IC694DSM324 is a highly versatile motion controller module designed for use within the GE Fanuc Rx3i PACSystem. This multi-axis module supports both standard mode, where the follower control loop is disabled, and follower mode, where it is enabled. It features advanced electronic CAM functionality and includes an analog I\/O port for PC connectivity, as well as individual switch inputs for each servo axis. Programming and configuration can be easily managed through a single connection point; the module utilizes flash memory for firmware storage, which can be updated via the COMM port. With non-volatile memory capable of storing up to 10 programs and 40 subroutines, the IC694DSM324 is designed to accommodate a powerful set of motion programming instructions for controlling one to four axes.\u003c\/p\u003e\n\n\u003cp\u003eThe module is equipped with eight LED indicators that provide real-time status feedback. The STATUS LED is typically lit, indicating normal operation; if it turns off, this signals an error condition. The CONFIG LED illuminates during module configuration, while the FSSB LED indicates active FSSB communications, blinking during the setup phase. Individual axis-enabled LEDs indicate the operational status of drives for axes 1 through 4. Additionally, the FSSB connector facilitates fiber-optic connectivity to servo amplifiers for seamless command and diagnostic exchanges, and it is protected by a cap to prevent damage. The RJ-11 COMM port is designated for firmware update downloads. Power is supplied through dedicated ports for 24 VDC and 5 VDC, with pre-manufactured cables available in lengths of 1 meter and 3 meters. For optimal performance, the IC694DSM324 should be grounded to the frame using the ground terminal located at the module's base, with a grounding resistance of 100 ohms or less. \u003c\/p\u003e\n\n\u003cp\u003eIn summary, the IC694DSM324 is a single-slot servo motion module that efficiently operates on a universal backplane and requires a power consumption of 1360 mA at 5 VDC, making it an essential component for sophisticated motion control applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964496040172,"sku":"IC694DSM324","price":0.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_136f4e21-1f95-4f56-9c57-355811c34e31.png?v=1762701587","url":"https:\/\/www.industrialautomationco.com\/en-ca\/products\/ge-fanuc-ic694dsm324","provider":"Industrial Automation Co.","version":"1.0","type":"link"}