{"title":"Penn-Union","description":"\u003cp\u003eExplore Penn-Union electrical connectors, grounding hardware and installation tools for cable termination, splicing, power distribution and bonding. Our collection includes copper and aluminum compression lugs and splices, mechanical lugs, insulated power bars, distribution blocks, split-bolt connectors, ground clamps and grounding bus bars. You’ll also find terminal blocks, substation connectors, flexible braids, compression dies, crimping tools, cable cutters and oxide inhibitors for electrical installation and maintenance work. Choose from different barrel styles, mounting-hole configurations, conductor ranges and connection methods to suit your cable and equipment. Long-barrel, standard-barrel and flared-entry options address different termination requirements, while grounding components provide connection arrangements for specified conductors, pipes, rods and mounting surfaces. Check individual product specifications for conductor compatibility, dimensions, tooling requirements and applicable ratings. Whether you’re specifying a new installation or replacing an existing connection, browse our Penn-Union collection to find the connector, grounding component or installation accessory that matches your application.\u003c\/p\u003e","products":[{"product_id":"penn-union-s-4-0-250","title":"Penn-Union S-4\/0-250","description":"\u003cp\u003eThe Penn-Union S-4\/0-250 is a copper split bolt connector for two conductors - 1\/0 AWG - 250 kcmil (equal main \u0026amp; tap). The specified conductor range is 1\/0 AWG - 250 kcmil. The drawing specifications give L 2.08 inch; W 1.31 inch; B 1.00 inch; A 0.58 inch; Torque (in.-lbs.) 650. The connector is made from high strength copper alloy – highly resistant to corrosion and season cracking. For use with a wide range of copper solid, compact, compressed, concentric, copper weld conductors, and rebar. Approved for electrical power, grounding\/bonding, and direct burial applications. The hexagonal design allows easy installation with standard tooling Under torque, this design provides high contact pressure between conductors or conductor to rebar. The stated rating is copper conductors, 600 V, 90°C. The installation arrangement can use with torque wrench, standard socket, box or open-end wrenches. The connector can be reused when proper installation practices are followed. The split-bolt design makes a mechanical connection between the supported copper conductors or between a conductor and rebar. Tightening the nut moves the pressure bar into the conductor arrangement, creating the contact pressure specified by the design. Hexagonal wrenching surfaces support the use of a torque wrench and standard sockets, box wrenches or open-end wrenches. The equal main-and-tap range describes one particular conductor combination; other combinations must follow the connector's individual range information. At this wire-to-wire connection, the clamping arrangement retains the supported conductors in contact through the connector's conductive structure. The fastener secures that arrangement after the cables are placed in their intended positions. The cable-size range is therefore relevant to each wire interface, including the particular run-and-tap combination being connected.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661392347372,"sku":"S-4\/0-250","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/S.png?v=1791302132"},{"product_id":"penn-union-s-6","title":"Penn-Union S-6","description":"\u003cp\u003eThe Penn-Union S-6 is a copper split bolt connector for two conductors - 10 AWG - 6 AWG (equal main \u0026amp; tap). The specified conductor range is 10 AWG - 6 AWG. The drawing specifications give L 1.05 inch; W 0.63 inch; B 0.50 inch; A 0.17 inch; Torque (in.-lbs.) 165. The connector is made from high strength copper alloy – highly resistant to corrosion and season cracking. For use with a wide range of copper solid, compact, compressed, concentric, copper weld conductors, and rebar. Approved for electrical power, grounding\/bonding, and direct burial applications. The hexagonal design allows easy installation with standard tooling Under torque, this design provides high contact pressure between conductors or conductor to rebar. The stated rating is copper conductors, 600 V, 90°C. The installation arrangement can use with torque wrench, standard socket, box or open-end wrenches. The connector can be reused when proper installation practices are followed. The split-bolt design makes a mechanical connection between the supported copper conductors or between a conductor and rebar. Tightening the nut moves the pressure bar into the conductor arrangement, creating the contact pressure specified by the design. Hexagonal wrenching surfaces support the use of a torque wrench and standard sockets, box wrenches or open-end wrenches. The equal main-and-tap range describes one particular conductor combination; other combinations must follow the connector's individual range information. At this wire-to-wire connection, the clamping arrangement retains the supported conductors in contact through the connector's conductive structure. The fastener secures that arrangement after the cables are placed in their intended positions. The cable-size range is therefore relevant to each wire interface, including the particular run-and-tap combination being connected.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661413155052,"sku":"S-6","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/S_6fa41ad4-f51a-4300-ac6c-76f9961c6994.png?v=1791302265"},{"product_id":"penn-union-s-10","title":"Penn-Union S-10","description":"\u003cp\u003eThe Penn-Union S-10 is a copper split bolt connector for two conductors - 16 AWG - 10 AWG (equal main \u0026amp; tap). The specified conductor range is 16 AWG - 10 AWG. The drawing specifications give L 0.72 inch; W 0.50 inch; B 0.34 inch; A 0.13 inch; Torque (in.-lbs.) 80. The connector is made from high strength copper alloy – highly resistant to corrosion and season cracking. For use with a wide range of copper solid, compact, compressed, concentric, copper weld conductors, and rebar. Approved for electrical power, grounding\/bonding, and direct burial applications. The hexagonal design allows easy installation with standard tooling Under torque, this design provides high contact pressure between conductors or conductor to rebar. The stated rating is copper conductors, 600 V, 90°C. The installation arrangement can use with torque wrench, standard socket, box or open-end wrenches. The connector can be reused when proper installation practices are followed. The split-bolt design makes a mechanical connection between the supported copper conductors or between a conductor and rebar. Tightening the nut moves the pressure bar into the conductor arrangement, creating the contact pressure specified by the design. Hexagonal wrenching surfaces support the use of a torque wrench and standard sockets, box wrenches or open-end wrenches. The equal main-and-tap range describes one particular conductor combination; other combinations must follow the connector's individual range information. At this wire-to-wire connection, the clamping arrangement retains the supported conductors in contact through the connector's conductive structure. The fastener secures that arrangement after the cables are placed in their intended positions. The cable-size range is therefore relevant to each wire interface, including the particular run-and-tap combination being connected.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661426819308,"sku":"S-10","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/S_3553e8ff-8aa9-41e0-b1d5-3626e60f9dd9.png?v=1791302337"},{"product_id":"penn-union-s-8","title":"Penn-Union S-8","description":"\u003cp\u003eThe Penn-Union S-8 is a copper split bolt connector for two conductors - 16 AWG - 8 AWG (equal main \u0026amp; tap). The specified conductor range is 16 AWG - 8 AWG. The drawing specifications give L 0.84 inch; W 0.50 inch; B 0.38 inch; A 0.15 inch; Torque (in.-lbs.) 80. The connector is made from high strength copper alloy – highly resistant to corrosion and season cracking. For use with a wide range of copper solid, compact, compressed, concentric, copper weld conductors, and rebar. Approved for electrical power, grounding\/bonding, and direct burial applications. The hexagonal design allows easy installation with standard tooling Under torque, this design provides high contact pressure between conductors or conductor to rebar. The stated rating is copper conductors, 600 V, 90°C. The installation arrangement can use with torque wrench, standard socket, box or open-end wrenches. The connector can be reused when proper installation practices are followed. The split-bolt design makes a mechanical connection between the supported copper conductors or between a conductor and rebar. Tightening the nut moves the pressure bar into the conductor arrangement, creating the contact pressure specified by the design. Hexagonal wrenching surfaces support the use of a torque wrench and standard sockets, box wrenches or open-end wrenches. The equal main-and-tap range describes one particular conductor combination; other combinations must follow the connector's individual range information. At this wire-to-wire connection, the clamping arrangement retains the supported conductors in contact through the connector's conductive structure. The fastener secures that arrangement after the cables are placed in their intended positions. The cable-size range is therefore relevant to each wire interface, including the particular run-and-tap combination being connected.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661429309676,"sku":"S-8","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/S_de53e177-e096-44fa-9ebd-76bffba24f56.png?v=1791302341"},{"product_id":"penn-union-s-2-0","title":"Penn-Union S-2\/0","description":"\u003cp\u003eThe Penn-Union S-2\/0 is a copper split bolt connector for two conductors - 2 AWG - 2\/0 AWG (equal main \u0026amp; tap). The specified conductor range is 2 AWG - 2\/0 AWG. The drawing specifications give L 1.82 inch; W 1.00 inch; B 0.81 inch; A 0.42 inch; Torque (in.-lbs.) 385. The connector is made from high strength copper alloy – highly resistant to corrosion and season cracking. For use with a wide range of copper solid, compact, compressed, concentric, copper weld conductors, and rebar. Approved for electrical power, grounding\/bonding, and direct burial applications. The hexagonal design allows easy installation with standard tooling Under torque, this design provides high contact pressure between conductors or conductor to rebar. The stated rating is copper conductors, 600 V, 90°C. The installation arrangement can use with torque wrench, standard socket, box or open-end wrenches. The connector can be reused when proper installation practices are followed. The split-bolt design makes a mechanical connection between the supported copper conductors or between a conductor and rebar. Tightening the nut moves the pressure bar into the conductor arrangement, creating the contact pressure specified by the design. Hexagonal wrenching surfaces support the use of a torque wrench and standard sockets, box wrenches or open-end wrenches. The equal main-and-tap range describes one particular conductor combination; other combinations must follow the connector's individual range information. At this wire-to-wire connection, the clamping arrangement retains the supported conductors in contact through the connector's conductive structure. The fastener secures that arrangement after the cables are placed in their intended positions. The cable-size range is therefore relevant to each wire interface, including the particular run-and-tap combination being connected.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661431242988,"sku":"S-2\/0","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/S_c8481d06-54cd-4270-89c3-533769eec19b.png?v=1791302355"},{"product_id":"penn-union-s-3-0","title":"Penn-Union S-3\/0","description":"\u003cp\u003eThe Penn-Union S-3\/0 is a copper split bolt connector for two conductors - 2 sol - 3\/0 AWG (equal main \u0026amp; tap). The specified conductor range is 2 AWG - 3\/0 AWG. The drawing specifications give L 2.00 inch; W 1.13 inch; B 0.88 inch; A 0.47 inch; Torque (in.-lbs.) 500. The connector is made from high strength copper alloy – highly resistant to corrosion and season cracking. For use with a wide range of copper solid, compact, compressed, concentric, copper weld conductors, and rebar. Approved for electrical power, grounding\/bonding, and direct burial applications. The hexagonal design allows easy installation with standard tooling Under torque, this design provides high contact pressure between conductors or conductor to rebar. The stated rating is copper conductors, 600 V, 90°C. The installation arrangement can use with torque wrench, standard socket, box or open-end wrenches. The connector can be reused when proper installation practices are followed. The split-bolt design makes a mechanical connection between the supported copper conductors or between a conductor and rebar. Tightening the nut moves the pressure bar into the conductor arrangement, creating the contact pressure specified by the design. Hexagonal wrenching surfaces support the use of a torque wrench and standard sockets, box wrenches or open-end wrenches. The equal main-and-tap range describes one particular conductor combination; other combinations must follow the connector's individual range information. At this wire-to-wire connection, the clamping arrangement retains the supported conductors in contact through the connector's conductive structure. The fastener secures that arrangement after the cables are placed in their intended positions. The cable-size range is therefore relevant to each wire interface, including the particular run-and-tap combination being connected.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661433798892,"sku":"S-3\/0","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/S_bbfa500b-30b0-46a1-a310-919929321e3b.png?v=1791302366"},{"product_id":"penn-union-s-500","title":"Penn-Union S-500","description":"\u003cp\u003eThe Penn-Union S-500 is a copper split bolt connector for two conductors - 250 kcmil - 500 kcmil (equal main \u0026amp; tap). The specified conductor range is 250 kcmil - 500 kcmil. The drawing specifications give L 3.00 inch; W 1.81 inch; B 1.63 inch; A 0.83 inch; Torque (in.-lbs.) 825. The connector is made from high strength copper alloy – highly resistant to corrosion and season cracking. For use with a wide range of copper solid, compact, compressed, concentric, copper weld conductors, and rebar. The hexagonal design allows easy installation with standard tooling Under torque, this design provides high contact pressure between conductors or conductor to rebar. The stated rating is copper conductors, 600 V, 90°C. The installation arrangement can use with torque wrench, standard socket, box or open-end wrenches. The connector can be reused when proper installation practices are followed. The connector is UL listed for grounding, bonding, and direct burial applications only. The split-bolt design makes a mechanical connection between the supported copper conductors or between a conductor and rebar. Tightening the nut moves the pressure bar into the conductor arrangement, creating the contact pressure specified by the design. Hexagonal wrenching surfaces support the use of a torque wrench and standard sockets, box wrenches or open-end wrenches. The equal main-and-tap range describes one particular conductor combination; other combinations must follow the connector's individual range information. At this wire-to-wire connection, the clamping arrangement retains the supported conductors in contact through the connector's conductive structure. The fastener secures that arrangement after the cables are placed in their intended positions. The cable-size range is therefore relevant to each wire interface, including the particular run-and-tap combination being connected.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661442482412,"sku":"S-500","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/S_f224e243-931a-4342-96b6-314316d64952.png?v=1791302412"},{"product_id":"penn-union-s-1-0","title":"Penn-Union S-1\/0","description":"\u003cp\u003eThe Penn-Union S-1\/0 is a copper split bolt connector for two conductors - 4 AWG - 1\/0 AWG (equal main \u0026amp; tap). The specified conductor range is 4 AWG - 1\/0 AWG. The drawing specifications give L 1.64 inch; W 0.88 inch; B 0.75 inch; A 0.38 inch; Torque (in.-lbs.) 385. The connector is made from high strength copper alloy – highly resistant to corrosion and season cracking. For use with a wide range of copper solid, compact, compressed, concentric, copper weld conductors, and rebar. Approved for electrical power, grounding\/bonding, and direct burial applications. The hexagonal design allows easy installation with standard tooling Under torque, this design provides high contact pressure between conductors or conductor to rebar. The stated rating is copper conductors, 600 V, 90°C. The installation arrangement can use with torque wrench, standard socket, box or open-end wrenches. The connector can be reused when proper installation practices are followed. The split-bolt design makes a mechanical connection between the supported copper conductors or between a conductor and rebar. Tightening the nut moves the pressure bar into the conductor arrangement, creating the contact pressure specified by the design. Hexagonal wrenching surfaces support the use of a torque wrench and standard sockets, box wrenches or open-end wrenches. The equal main-and-tap range describes one particular conductor combination; other combinations must follow the connector's individual range information. At this wire-to-wire connection, the clamping arrangement retains the supported conductors in contact through the connector's conductive structure. The fastener secures that arrangement after the cables are placed in their intended positions. The cable-size range is therefore relevant to each wire interface, including the particular run-and-tap combination being connected.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661457719532,"sku":"S-1\/0","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/S_5ba057f2-98fb-45a3-b80d-53e01d5cd720.png?v=1791302504"},{"product_id":"penn-union-s-350","title":"Penn-Union S-350","description":"\u003cp\u003eThe Penn-Union S-350 is a copper split bolt connector for two conductors - 4\/0 AWG - 350 kcmil (equal main \u0026amp; tap). The specified conductor range is 4\/0 AWG - 350 kcmil. The drawing specifications give L 2.63 inch; W 1.63 inch; B 1.50 inch; A 0.75 inch; Torque (in.-lbs.) 650. The connector is made from high strength copper alloy – highly resistant to corrosion and season cracking. For use with a wide range of copper solid, compact, compressed, concentric, copper weld conductors, and rebar. The hexagonal design allows easy installation with standard tooling Under torque, this design provides high contact pressure between conductors or conductor to rebar. The stated rating is copper conductors, 600 V, 90°C. The installation arrangement can use with torque wrench, standard socket, box or open-end wrenches. The connector can be reused when proper installation practices are followed. The connector is UL listed for grounding, bonding, and direct burial applications only. The split-bolt design makes a mechanical connection between the supported copper conductors or between a conductor and rebar. Tightening the nut moves the pressure bar into the conductor arrangement, creating the contact pressure specified by the design. Hexagonal wrenching surfaces support the use of a torque wrench and standard sockets, box wrenches or open-end wrenches. The equal main-and-tap range describes one particular conductor combination; other combinations must follow the connector's individual range information. At this wire-to-wire connection, the clamping arrangement retains the supported conductors in contact through the connector's conductive structure. The fastener secures that arrangement after the cables are placed in their intended positions. The cable-size range is therefore relevant to each wire interface, including the particular run-and-tap combination being connected.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661468696812,"sku":"S-350","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/S_de57fa0c-1d63-4793-a8ca-cd9d3a161b6a.png?v=1791302569"},{"product_id":"penn-union-s-2","title":"Penn-Union S-2","description":"\u003cp\u003eThe Penn-Union S-2 is a copper split bolt connector for two conductors - 6 AWG - 2 AWG (equal main \u0026amp; tap). The specified conductor range is 6 AWG - 2 AWG. The drawing specifications give L 1.32 inch; W 0.81 inch; B 0.69 inch; A 0.33 inch; Torque (in.-lbs.) 275. The connector is made from high strength copper alloy – highly resistant to corrosion and season cracking. For use with a wide range of copper solid, compact, compressed, concentric, copper weld conductors, and rebar. Approved for electrical power, grounding\/bonding, and direct burial applications. The hexagonal design allows easy installation with standard tooling Under torque, this design provides high contact pressure between conductors or conductor to rebar. The stated rating is copper conductors, 600 V, 90°C. The installation arrangement can use with torque wrench, standard socket, box or open-end wrenches. The connector can be reused when proper installation practices are followed. The split-bolt design makes a mechanical connection between the supported copper conductors or between a conductor and rebar. Tightening the nut moves the pressure bar into the conductor arrangement, creating the contact pressure specified by the design. Hexagonal wrenching surfaces support the use of a torque wrench and standard sockets, box wrenches or open-end wrenches. The equal main-and-tap range describes one particular conductor combination; other combinations must follow the connector's individual range information. At this wire-to-wire connection, the clamping arrangement retains the supported conductors in contact through the connector's conductive structure. The fastener secures that arrangement after the cables are placed in their intended positions. The cable-size range is therefore relevant to each wire interface, including the particular run-and-tap combination being connected.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661482328300,"sku":"S-2","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/S_8eb484c9-bb51-4953-91dc-941eb29ab53d.png?v=1791302631"},{"product_id":"penn-union-s-3","title":"Penn-Union S-3","description":"\u003cp\u003eThe Penn-Union S-3 is a copper split bolt connector for two conductors - 6 AWG - 2 AWG (equal main \u0026amp; tap). The specified conductor range is 6 AWG - 2 AWG. The drawing specifications give L 1.32 inch; W 0.81 inch; B 0.69 inch; A 0.33 inch; Torque (in.-lbs.) 275. The connector is made from high strength copper alloy – highly resistant to corrosion and season cracking. For use with a wide range of copper solid, compact, compressed, concentric, copper weld conductors, and rebar. Approved for electrical power, grounding\/bonding, and direct burial applications. The hexagonal design allows easy installation with standard tooling Under torque, this design provides high contact pressure between conductors or conductor to rebar. The stated rating is copper conductors, 600 V, 90°C. The installation arrangement can use with torque wrench, standard socket, box or open-end wrenches. The connector can be reused when proper installation practices are followed. The split-bolt design makes a mechanical connection between the supported copper conductors or between a conductor and rebar. Tightening the nut moves the pressure bar into the conductor arrangement, creating the contact pressure specified by the design. Hexagonal wrenching surfaces support the use of a torque wrench and standard sockets, box wrenches or open-end wrenches. The equal main-and-tap range describes one particular conductor combination; other combinations must follow the connector's individual range information. At this wire-to-wire connection, the clamping arrangement retains the supported conductors in contact through the connector's conductive structure. The fastener secures that arrangement after the cables are placed in their intended positions. The cable-size range is therefore relevant to each wire interface, including the particular run-and-tap combination being connected.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661482426604,"sku":"S-3","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/S_491e9506-bf76-4a7b-a8f0-2b839e3f5335.png?v=1791302634"},{"product_id":"penn-union-s-4","title":"Penn-Union S-4","description":"\u003cp\u003eThe Penn-Union S-4 is a copper split bolt connector for two conductors - 8 AWG - 4 AWG (equal main \u0026amp; tap). The specified conductor range is 8 AWG - 4 AWG. The drawing specifications give L 1.05 inch; W 0.69 inch; B 0.56 inch; A 0.22 inch; Torque (in.-lbs.) 165. The connector is made from high strength copper alloy – highly resistant to corrosion and season cracking. For use with a wide range of copper solid, compact, compressed, concentric, copper weld conductors, and rebar. Approved for electrical power, grounding\/bonding, and direct burial applications. The hexagonal design allows easy installation with standard tooling Under torque, this design provides high contact pressure between conductors or conductor to rebar. The stated rating is copper conductors, 600 V, 90°C. The installation arrangement can use with torque wrench, standard socket, box or open-end wrenches. The connector can be reused when proper installation practices are followed. The split-bolt design makes a mechanical connection between the supported copper conductors or between a conductor and rebar. Tightening the nut moves the pressure bar into the conductor arrangement, creating the contact pressure specified by the design. Hexagonal wrenching surfaces support the use of a torque wrench and standard sockets, box wrenches or open-end wrenches. The equal main-and-tap range describes one particular conductor combination; other combinations must follow the connector's individual range information. At this wire-to-wire connection, the clamping arrangement retains the supported conductors in contact through the connector's conductive structure. The fastener secures that arrangement after the cables are placed in their intended positions. The cable-size range is therefore relevant to each wire interface, including the particular run-and-tap combination being connected.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661529350380,"sku":"S-4","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/S_e3f93093-3c34-419e-9923-b38f2d9a9fa0.png?v=1791302797"},{"product_id":"penn-union-bblu-025d","title":"Penn-Union BBLU-025D","description":"\u003cp\u003ePenn Union BBLU-025D is a copper compression lug sized for 250 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 1\/2 inch, with 1.75 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 250 kcmil; Class M Flexible Cable: 3\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The yellow color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.09 inches, C = 3.00 inches, T = 0.16 inches, B = 1.63 inches, L = 5.13 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661616808172,"sku":"BBLU-025D","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D.png?v=1791303362"},{"product_id":"penn-union-bblu-025d-2tc38","title":"Penn-Union BBLU-025D-2TC38","description":"\u003cp\u003ePenn Union BBLU-025D-2TC38 is a copper compression lug sized for 250 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 3\/8 inch, with 1.00 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 250 kcmil; Class M Flexible Cable: 3\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The yellow color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.09 inches, C = 1.83 inches, T = 0.16 inches, B = 1.63 inches, L = 4.05 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661617496300,"sku":"BBLU-025D-2TC38","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_94e733c4-c6c6-4575-a31a-2bc241addda0.png?v=1791303370"},{"product_id":"penn-union-bblu-025s","title":"Penn-Union BBLU-025S","description":"\u003cp\u003ePenn Union BBLU-025S is a copper compression lug sized for 250 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 1\/2 inch. The specified conductor matches are Class B \u0026amp; C building wire: 250 kcmil; Class M Flexible Cable: 3\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The yellow color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.09 inches, C = 1.25 inches, T = 0.16 inches, B = 1.63 inches, L = 3.38 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661617856748,"sku":"BBLU-025S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S.png?v=1791303381"},{"product_id":"penn-union-bblu-030d","title":"Penn-Union BBLU-030D","description":"\u003cp\u003ePenn Union BBLU-030D is a copper compression lug sized for 300 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 1\/2 inch, with 1.75 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 300 kcmil; Class I Weld Cable: 4\/0 AWG; Class K Weld Cable: 4\/0 AWG; Navy Cable: #300; Diesel Locomotive Cable: 4\/0 AWG; Class H Cable: 4\/0 AWG; Class G Cable: 4\/0 AWG; Class M Flexible Cable: 4\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The white color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.19 inches, C = 3.00 inches, T = 0.16 inches, B = 2.00 inches, L = 5.59 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661617955052,"sku":"BBLU-030D","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_c844ae61-1713-46b1-8034-85c2feed934d.png?v=1791303384"},{"product_id":"penn-union-bblu-030d-2tc38","title":"Penn-Union BBLU-030D-2TC38","description":"\u003cp\u003ePenn Union BBLU-030D-2TC38 is a copper compression lug sized for 300 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 3\/8 inch, with 1.00 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 300 kcmil; Class I Weld Cable: 4\/0 AWG; Class K Weld Cable: 4\/0 AWG; Navy Cable: #300; Diesel Locomotive Cable: 4\/0 AWG; Class H Cable: 4\/0 AWG; Class G Cable: 4\/0 AWG; Class M Flexible Cable: 4\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The white color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.19 inches, C = 1.83 inches, T = 0.16 inches, B = 2.00 inches, L = 4.42 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661633454316,"sku":"BBLU-030D-2TC38","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_fc78918d-cb53-4c41-97ab-34def36a0edc.png?v=1791303392"},{"product_id":"penn-union-bblu-030s","title":"Penn-Union BBLU-030S","description":"\u003cp\u003ePenn Union BBLU-030S is a copper compression lug sized for 300 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 1\/2 inch. The specified conductor matches are Class B \u0026amp; C building wire: 300 kcmil; Class I Weld Cable: 4\/0 AWG; Class K Weld Cable: 4\/0 AWG; Navy Cable: #300; Diesel Locomotive Cable: 4\/0 AWG; Class H Cable: 4\/0 AWG; Class G Cable: 4\/0 AWG; Class M Flexible Cable: 4\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The white color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.19 inches, C = 1.25 inches, T = 0.16 inches, B = 2.00 inches, L = 3.81 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661649838316,"sku":"BBLU-030S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_27d430ab-9a1f-4c7e-bcbc-e3876ae42572.png?v=1791303401"},{"product_id":"penn-union-bblu-035d","title":"Penn-Union BBLU-035D","description":"\u003cp\u003ePenn Union BBLU-035D is a copper compression lug sized for 350 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 1\/2 inch, with 1.75 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 350 kcmil; Navy Cable: #350; Diesel Locomotive Cable: 262 MCM; Class H Cable: 250 kcmil; Class G Cable: 250 kcmil. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The red color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.28 inches, C = 3.00 inches, T = 0.17 inches, B = 2.00 inches, L = 5.66 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661650886892,"sku":"BBLU-035D","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_105b4b59-1d36-465e-8c92-01b34ac43f1e.png?v=1791303407"},{"product_id":"penn-union-bblu-035d-2tc38","title":"Penn-Union BBLU-035D-2TC38","description":"\u003cp\u003ePenn Union BBLU-035D-2TC38 is a copper compression lug sized for 350 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 3\/8 inch, with 1.00 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 350 kcmil; Navy Cable: #350; Diesel Locomotive Cable: 262 MCM; Class H Cable: 250 kcmil; Class G Cable: 250 kcmil. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The red color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.28 inches, C = 1.83 inches, T = 0.17 inches, B = 2.00 inches, L = 4.49 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661651116268,"sku":"BBLU-035D-2TC38","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_bbec99fd-9fc9-4071-adce-98c4b09c8bc2.png?v=1791303417"},{"product_id":"penn-union-bblu-035s","title":"Penn-Union BBLU-035S","description":"\u003cp\u003ePenn Union BBLU-035S is a copper compression lug sized for 350 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 1\/2 inch. The specified conductor matches are Class B \u0026amp; C building wire: 350 kcmil; Navy Cable: #350; Diesel Locomotive Cable: 262 MCM; Class H Cable: 250 kcmil; Class G Cable: 250 kcmil. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The red color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.28 inches, C = 1.25 inches, T = 0.17 inches, B = 2.00 inches, L = 3.84 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661651706092,"sku":"BBLU-035S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_1d7be927-1a64-4e4f-8915-b9b0938ec4e2.png?v=1791303427"},{"product_id":"penn-union-bblu-040d","title":"Penn-Union BBLU-040D","description":"\u003cp\u003ePenn Union BBLU-040D is a copper compression lug sized for 400 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 1\/2 inch, with 1.75 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 400 kcmil; Navy Cable: #400; Diesel Locomotive Cable: 313 MCM; Class H Cable: 300 kcmil; Class G Cable: 300 kcmil; Class M Flexible Cable: 250 kcmil. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The blue color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.39 inches, C = 3.00 inches, T = 0.19 inches, B = 2.13 inches, L = 5.79 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661651869932,"sku":"BBLU-040D","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_ce54f1a3-5f7e-4a5e-b263-05347a8b1c0f.png?v=1791303432"},{"product_id":"penn-union-bblu-040d-2tc38","title":"Penn-Union BBLU-040D-2TC38","description":"\u003cp\u003ePenn Union BBLU-040D-2TC38 is a copper compression lug sized for 400 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 3\/8 inch, with 1.00 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 400 kcmil; Navy Cable: #400; Diesel Locomotive Cable: 313 MCM; Class H Cable: 300 kcmil; Class G Cable: 300 kcmil; Class M Flexible Cable: 250 kcmil. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The blue color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.39 inches, C = 1.83 inches, T = 0.19 inches, B = 2.13 inches, L = 4.62 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661652361452,"sku":"BBLU-040D-2TC38","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_142cf4de-b4d0-41a7-bf63-fd931f98f2b8.png?v=1791303439"},{"product_id":"penn-union-bblu-040s","title":"Penn-Union BBLU-040S","description":"\u003cp\u003ePenn Union BBLU-040S is a copper compression lug sized for 400 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 5\/8 inch. The specified conductor matches are Class B \u0026amp; C building wire: 400 kcmil; Navy Cable: #400; Diesel Locomotive Cable: 313 MCM; Class H Cable: 300 kcmil; Class G Cable: 300 kcmil; Class M Flexible Cable: 250 kcmil. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The blue color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.39 inches, C = 1.50 inches, T = 0.19 inches, B = 2.13 inches, L = 4.31 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661652525292,"sku":"BBLU-040S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_17308ee2-8304-4dd7-8158-4feaa3e73420.png?v=1791303445"},{"product_id":"penn-union-bblu-040s1","title":"Penn-Union BBLU-040S1","description":"\u003cp\u003ePenn Union BBLU-040S1 is a copper compression lug sized for 400 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 1\/2 inch. The specified conductor matches are Class B \u0026amp; C building wire: 400 kcmil; Navy Cable: #400; Diesel Locomotive Cable: 313 MCM; Class H Cable: 300 kcmil; Class G Cable: 300 kcmil; Class M Flexible Cable: 250 kcmil. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The blue color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.39 inches, C = 1.25 inches, T = 0.18 inches, B = 2.12 inches, L = 4.06 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661652590828,"sku":"BBLU-040S1","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_858a1990-abf5-496a-b689-e66a3aef2d57.png?v=1791303447"},{"product_id":"penn-union-bblu-050d","title":"Penn-Union BBLU-050D","description":"\u003cp\u003ePenn Union BBLU-050D is a copper compression lug sized for 500 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 1\/2 inch, with 1.75 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 500 kcmil; Class I Weld Cable: 350 MCM 882\/24; Diesel Locomotive Cable: 373 MCM; Class H Cable: 400 kcmil; Class G Cable: 400 kcmil; Class M Flexible Cable: 350 kcmil. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The brown color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.53 inches, C = 3.00 inches, T = 0.21 inches, B = 2.25 inches, L = 6.03 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661670285548,"sku":"BBLU-050D","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_a0a6d41e-d596-49e0-8a90-ae6090951a36.png?v=1791303452"},{"product_id":"penn-union-bblu-050d-2tc38","title":"Penn-Union BBLU-050D-2TC38","description":"\u003cp\u003ePenn Union BBLU-050D-2TC38 is a copper compression lug sized for 500 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 3\/8 inch, with 1.00 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 500 kcmil; Class I Weld Cable: 350 MCM 882\/24; Diesel Locomotive Cable: 373 MCM; Class H Cable: 400 kcmil; Class G Cable: 400 kcmil; Class M Flexible Cable: 350 kcmil. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The brown color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.53 inches, C = 1.83 inches, T = 0.21 inches, B = 2.25 inches, L = 4.86 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661676675308,"sku":"BBLU-050D-2TC38","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_d43c2b44-6d80-4873-9287-d528019e7241.png?v=1791303456"},{"product_id":"penn-union-bblu-050s","title":"Penn-Union BBLU-050S","description":"\u003cp\u003ePenn Union BBLU-050S is a copper compression lug sized for 500 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 5\/8 inch. The specified conductor matches are Class B \u0026amp; C building wire: 500 kcmil; Class I Weld Cable: 350 MCM 882\/24; Diesel Locomotive Cable: 373 MCM; Class H Cable: 400 kcmil; Class G Cable: 400 kcmil; Class M Flexible Cable: 350 kcmil. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The brown color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.53 inches, C = 1.47 inches, T = 0.21 inches, B = 2.31 inches, L = 4.56 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661695254764,"sku":"BBLU-050S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_da369e7b-504f-4f3b-80aa-fe756059113b.png?v=1791303465"},{"product_id":"penn-union-bblu-050s2","title":"Penn-Union BBLU-050S2","description":"\u003cp\u003ePenn Union BBLU-050S2 is a copper compression lug sized for 500 kcmil conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 1\/2 inch. The specified conductor matches are Class B \u0026amp; C building wire: 500 kcmil; Class I Weld Cable: 350 MCM 882\/24; Diesel Locomotive Cable: 373 MCM; Class H Cable: 400 kcmil; Class G Cable: 400 kcmil; Class M Flexible Cable: 350 kcmil. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The brown color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.53 inches, C = 1.25 inches, T = 0.21 inches, B = 2.25 inches, L = 4.25 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661695287532,"sku":"BBLU-050S2","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_e7d07518-9594-4bc4-a59c-fe623c3be02b.png?v=1791303467"},{"product_id":"penn-union-bblu-1-0d-2tc14","title":"Penn-Union BBLU-1\/0D-2TC14","description":"\u003cp\u003ePenn Union BBLU-1\/0D-2TC14 is a copper compression lug sized for 1\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 1\/4 inch, with 0.63 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 1\/0 AWG; Class K Weld Cable: 1 AWG; Navy Cable: #100; Diesel Locomotive Cable: 1 AWG; Class H Cable: 1 AWG; Class G Cable: 1 AWG; Class M Flexible Cable: 1 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The pink color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.74 inches, C = 1.22 inches, T = 0.11 inches, B = 1.38 inches, L = 2.94 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661728088300,"sku":"BBLU-1\/0D-2TC14","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_13789291-8bc2-4346-a295-18d9dd7bff33.png?v=1791303536"},{"product_id":"penn-union-bblu-1-0d-2tc38","title":"Penn-Union BBLU-1\/0D-2TC38","description":"\u003cp\u003ePenn Union BBLU-1\/0D-2TC38 is a copper compression lug sized for 1\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 3\/8 inch, with 1.00 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 1\/0 AWG; Class K Weld Cable: 1 AWG; Navy Cable: #100; Diesel Locomotive Cable: 1 AWG; Class H Cable: 1 AWG; Class G Cable: 1 AWG; Class M Flexible Cable: 1 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The pink color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.74 inches, C = 1.83 inches, T = 0.11 inches, B = 1.38 inches, L = 3.55 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661728284908,"sku":"BBLU-1\/0D-2TC38","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_122bc5b0-df10-4b9f-b96e-5c37cedbea8f.png?v=1791303542"},{"product_id":"penn-union-bblu-1-0d3","title":"Penn-Union BBLU-1\/0D3","description":"\u003cp\u003ePenn Union BBLU-1\/0D3 is a copper compression lug sized for 1\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 1\/2 inch, with 1.75 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 1\/0 AWG; Class K Weld Cable: 1 AWG; Navy Cable: #100; Diesel Locomotive Cable: 1 AWG; Class H Cable: 1 AWG; Class G Cable: 1 AWG; Class M Flexible Cable: 1 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The pink color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.81 inches, C = 3.00 inches, T = 0.10 inches, B = 1.38 inches, L = 4.63 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661728579820,"sku":"BBLU-1\/0D3","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_988e72aa-b860-427a-8bd5-ca5ebc2a97a5.png?v=1791303551"},{"product_id":"penn-union-bblu-1-0s","title":"Penn-Union BBLU-1\/0S","description":"\u003cp\u003ePenn Union BBLU-1\/0S is a copper compression lug sized for 1\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 5\/16 inch. The specified conductor matches are Class B \u0026amp; C building wire: 1\/0 AWG; Class K Weld Cable: 1 AWG; Navy Cable: #100; Diesel Locomotive Cable: 1 AWG; Class H Cable: 1 AWG; Class G Cable: 1 AWG; Class M Flexible Cable: 1 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The pink color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.73 inches, C = 0.75 inches, T = 0.13 inches, B = 1.34 inches, L = 2.44 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661728874732,"sku":"BBLU-1\/0S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_f1703f04-5a4c-4983-8532-c313c2a09534.png?v=1791303555"},{"product_id":"penn-union-bblu-1-0s2","title":"Penn-Union BBLU-1\/0S2","description":"\u003cp\u003ePenn Union BBLU-1\/0S2 is a copper compression lug sized for 1\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 3\/8 inch. The specified conductor matches are Class B \u0026amp; C building wire: 1\/0 AWG; Class K Weld Cable: 1 AWG; Navy Cable: #100; Diesel Locomotive Cable: 1 AWG; Class H Cable: 1 AWG; Class G Cable: 1 AWG; Class M Flexible Cable: 1 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The pink color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.75 inches, C = 0.81 inches, T = 0.12 inches, B = 1.25 inches, L = 2.37 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661729005804,"sku":"BBLU-1\/0S2","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_b76053de-fb77-4efb-94e7-7fd32ab14e93.png?v=1791303559"},{"product_id":"penn-union-bblu-1d","title":"Penn-Union BBLU-1D","description":"\u003cp\u003ePenn Union BBLU-1D is a copper compression lug sized for 1 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 5\/16 inch, with 0.88 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 1 AWG; Class I Weld Cable: 2 AWG; Class K Weld Cable: 2 AWG; Navy Cable: #75; Diesel Locomotive Cable: 2 AWG; Class H Cable: 2 AWG; Class G Cable: 2 AWG; Class M Flexible Cable: 2 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The green color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.67 inches, C = 1.63 inches, T = 0.11 inches, B = 1.38 inches, L = 3.38 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661763182828,"sku":"BBLU-1D","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_72ceaae2-6937-4a41-8bdb-768a6d138638.png?v=1791303601"},{"product_id":"penn-union-bblu-1d-2tc14","title":"Penn-Union BBLU-1D-2TC14","description":"\u003cp\u003ePenn Union BBLU-1D-2TC14 is a copper compression lug sized for 1 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 1\/4 inch, with 0.63 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 1 AWG; Class I Weld Cable: 2 AWG; Class K Weld Cable: 2 AWG; Navy Cable: #75; Diesel Locomotive Cable: 2 AWG; Class H Cable: 2 AWG; Class G Cable: 2 AWG; Class M Flexible Cable: 2 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The green color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.67 inches, C = 1.22 inches, T = 0.10 inches, B = 1.38 inches, L = 2.94 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661763739884,"sku":"BBLU-1D-2TC14","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_9ae93f85-32b1-4d6d-b3a4-a783358e75a5.png?v=1791303607"},{"product_id":"penn-union-bblu-1s","title":"Penn-Union BBLU-1S","description":"\u003cp\u003ePenn Union BBLU-1S is a copper compression lug sized for 1 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 5\/16 inch. The specified conductor matches are Class B \u0026amp; C building wire: 1 AWG; Class I Weld Cable: 2 AWG; Class K Weld Cable: 2 AWG; Navy Cable: #75; Diesel Locomotive Cable: 2 AWG; Class H Cable: 2 AWG; Class G Cable: 2 AWG; Class M Flexible Cable: 2 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The green color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.67 inches, C = 0.75 inches, T = 0.11 inches, B = 1.34 inches, L = 2.36 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661764296940,"sku":"BBLU-1S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_383261f0-cbdd-450d-9f2e-2445d316643c.png?v=1791303626"},{"product_id":"penn-union-bblu-1s2","title":"Penn-Union BBLU-1S2","description":"\u003cp\u003ePenn Union BBLU-1S2 is a copper compression lug sized for 1 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 3\/8 inch. The specified conductor matches are Class B \u0026amp; C building wire: 1 AWG; Class I Weld Cable: 2 AWG; Class K Weld Cable: 2 AWG; Navy Cable: #75; Diesel Locomotive Cable: 2 AWG; Class H Cable: 2 AWG; Class G Cable: 2 AWG; Class M Flexible Cable: 2 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The green color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.67 inches, C = 0.75 inches, T = 0.11 inches, B = 1.34 inches, L = 2.38 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661764624620,"sku":"BBLU-1S2","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_a23ea49c-b757-4013-aa74-b3a6c45f373b.png?v=1791303628"},{"product_id":"penn-union-bblu-1s7","title":"Penn-Union BBLU-1S7","description":"\u003cp\u003ePenn Union BBLU-1S7 is a copper compression lug sized for 1 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 1\/4 inch. The specified conductor matches are Class B \u0026amp; C building wire: 1 AWG; Class I Weld Cable: 2 AWG; Class K Weld Cable: 2 AWG; Navy Cable: #75; Diesel Locomotive Cable: 2 AWG; Class H Cable: 2 AWG; Class G Cable: 2 AWG; Class M Flexible Cable: 2 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The green color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.67 inches, C = 0.75 inches, T = 0.11 inches, B = 1.34 inches, L = 2.38 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661771997420,"sku":"BBLU-1S7","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_0c331344-6ff8-47d1-92fe-5ad7abd21426.png?v=1791303637"},{"product_id":"penn-union-bblu-2-0d","title":"Penn-Union BBLU-2\/0D","description":"\u003cp\u003ePenn Union BBLU-2\/0D is a copper compression lug sized for 2\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 1\/2 inch, with 1.75 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 2\/0 AWG; Class I Weld Cable: 1\/0 AWG; Class K Weld Cable: 1\/0 AWG; Navy Cable: #125; Diesel Locomotive Cable: 1\/0 AWG; Class H Cable: 1\/0 AWG; Class G Cable: 1\/0 AWG; Class M Flexible Cable: 1\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The black color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.82 inches, C = 3.00 inches, T = 0.12 inches, B = 1.50 inches, L = 4.84 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661781565676,"sku":"BBLU-2\/0D","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_06c8d3e2-6830-44b7-a1fc-577f94910ef9.png?v=1791303646"},{"product_id":"penn-union-bblu-2-0d-2tc38","title":"Penn-Union BBLU-2\/0D-2TC38","description":"\u003cp\u003ePenn Union BBLU-2\/0D-2TC38 is a copper compression lug sized for 2\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 3\/8 inch, with 1.00 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 2\/0 AWG; Class I Weld Cable: 1\/0 AWG; Class K Weld Cable: 1\/0 AWG; Navy Cable: #125; Diesel Locomotive Cable: 1\/0 AWG; Class H Cable: 1\/0 AWG; Class G Cable: 1\/0 AWG; Class M Flexible Cable: 1\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The black color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.82 inches, C = 1.83 inches, T = 0.12 inches, B = 1.50 inches, L = 3.67 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661786710252,"sku":"BBLU-2\/0D-2TC38","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_7bdd2534-e59b-4d21-84a0-334fb6430f63.png?v=1791303655"},{"product_id":"penn-union-bblu-2-0s","title":"Penn-Union BBLU-2\/0S","description":"\u003cp\u003ePenn Union BBLU-2\/0S is a copper compression lug sized for 2\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 3\/8 inch. The specified conductor matches are Class B \u0026amp; C building wire: 2\/0 AWG; Class I Weld Cable: 1\/0 AWG; Class K Weld Cable: 1\/0 AWG; Navy Cable: #125; Diesel Locomotive Cable: 1\/0 AWG; Class H Cable: 1\/0 AWG; Class G Cable: 1\/0 AWG; Class M Flexible Cable: 1\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The black color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.81 inches, C = 0.87 inches, T = 0.13 inches, B = 1.50 inches, L = 2.72 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661788676332,"sku":"BBLU-2\/0S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_4476ff69-e68d-4883-99f7-88d5f31dc197.png?v=1791303667"},{"product_id":"penn-union-bblu-2d-2tc14","title":"Penn-Union BBLU-2D-2TC14","description":"\u003cp\u003ePenn Union BBLU-2D-2TC14 is a copper compression lug sized for 2 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 1\/4 inch, with 0.63 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 2 AWG; Navy Cable: #60; Class H Cable: 3 AWG; Class G Cable: 3 AWG; Class M Flexible Cable: 3 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The brown color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.59 inches, C = 1.22 inches, T = 0.11 inches, B = 1.25 inches, L = 2.75 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661789888748,"sku":"BBLU-2D-2TC14","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_916c5eaf-6fd4-4e82-b1c3-583fe57eeefc.png?v=1791303688"},{"product_id":"penn-union-bblu-2d-2tc38","title":"Penn-Union BBLU-2D-2TC38","description":"\u003cp\u003ePenn Union BBLU-2D-2TC38 is a copper compression lug sized for 2 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 3\/8 inch, with 1.00 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 2 AWG; Navy Cable: #60; Class H Cable: 3 AWG; Class G Cable: 3 AWG; Class M Flexible Cable: 3 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The brown color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.59 inches, C = 1.83 inches, T = 0.11 inches, B = 1.25 inches, L = 3.36 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661796212972,"sku":"BBLU-2D-2TC38","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_1c71a940-7cd4-4774-99c6-cc1c24e4679b.png?v=1791303697"},{"product_id":"penn-union-bblu-3-0d","title":"Penn-Union BBLU-3\/0D","description":"\u003cp\u003ePenn Union BBLU-3\/0D is a copper compression lug sized for 3\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 1\/2 inch, with 1.75 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 3\/0 AWG; Class I Weld Cable: 2\/0 AWG; Class K Weld Cable: 2\/0 AWG; Navy Cable: #150; Diesel Locomotive Cable: 2\/0 AWG; Class H Cable: 2\/0 AWG; Class G Cable: 2\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The orange color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.89 inches, C = 3.00 inches, T = 0.13 inches, B = 1.50 inches, L = 4.91 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661811122412,"sku":"BBLU-3\/0D","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_773543d5-7e80-4c5a-97e1-5aba1c676f51.png?v=1791303719"},{"product_id":"penn-union-bblu-3-0d-2tc38","title":"Penn-Union BBLU-3\/0D-2TC38","description":"\u003cp\u003ePenn Union BBLU-3\/0D-2TC38 is a copper compression lug sized for 3\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 3\/8 inch, with 1.00 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 3\/0 AWG; Class I Weld Cable: 2\/0 AWG; Class K Weld Cable: 2\/0 AWG; Navy Cable: #150; Diesel Locomotive Cable: 2\/0 AWG; Class H Cable: 2\/0 AWG; Class G Cable: 2\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The orange color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.89 inches, C = 1.83 inches, T = 0.13 inches, B = 1.50 inches, L = 3.74 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661812269292,"sku":"BBLU-3\/0D-2TC38","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_8221ef60-f158-4477-8d13-d554bfcdc86a.png?v=1791303728"},{"product_id":"penn-union-bblu-3-0s","title":"Penn-Union BBLU-3\/0S","description":"\u003cp\u003ePenn Union BBLU-3\/0S is a copper compression lug sized for 3\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 1\/2 inch. The specified conductor matches are Class B \u0026amp; C building wire: 3\/0 AWG; Class I Weld Cable: 2\/0 AWG; Class K Weld Cable: 2\/0 AWG; Navy Cable: #150; Diesel Locomotive Cable: 2\/0 AWG; Class H Cable: 2\/0 AWG; Class G Cable: 2\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The orange color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.89 inches, C = 1.25 inches, T = 0.13 inches, B = 1.50 inches, L = 3.12 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661812564204,"sku":"BBLU-3\/0S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_e773c05f-950d-4873-ab98-65999f6224e1.png?v=1791303738"},{"product_id":"penn-union-bblu-3-0s2","title":"Penn-Union BBLU-3\/0S2","description":"\u003cp\u003ePenn Union BBLU-3\/0S2 is a copper compression lug sized for 3\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The one-hole mounting arrangement provides a single fastening position on the tongue. The stud opening and tongue profile are the key equipment-side details to match when replacing or specifying this lug. The specified stud or bolt opening is 3\/8 inch. The specified conductor matches are Class B \u0026amp; C building wire: 3\/0 AWG; Class I Weld Cable: 2\/0 AWG; Class K Weld Cable: 2\/0 AWG; Navy Cable: #150; Diesel Locomotive Cable: 2\/0 AWG; Class H Cable: 2\/0 AWG; Class G Cable: 2\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The orange color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 0.89 inches, C = 1.25 inches, T = 0.12 inches, B = 1.50 inches, L = 3.12 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements. The product information also identifies UL 467 listing for grounding, bonding and direct burial applications, with the corresponding installation requirements applying to the finished connection.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661812629740,"sku":"BBLU-3\/0S2","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-S_1bed6bce-e658-4a2f-9d8e-327fcbd7d25f.png?v=1791303740"},{"product_id":"penn-union-bblu-4-0d","title":"Penn-Union BBLU-4\/0D","description":"\u003cp\u003ePenn Union BBLU-4\/0D is a copper compression lug sized for 4\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 1\/2 inch, with 1.75 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 4\/0 AWG; Class K Weld Cable: 3\/0 AWG; Navy Cable: #200; Diesel Locomotive Cable: 3\/0 AWG; Class H Cable: 3\/0 AWG; Class G Cable: 3\/0 AWG; Class M Flexible Cable: 2\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The purple color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.00 inches, C = 3.00 inches, T = 0.14 inches, B = 1.63 inches, L = 5.10 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661854310636,"sku":"BBLU-4\/0D","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_a05b314e-e7ab-4653-9862-e6c6a6cb1f83.png?v=1791303772"},{"product_id":"penn-union-bblu-4-0d-2tc38","title":"Penn-Union BBLU-4\/0D-2TC38","description":"\u003cp\u003ePenn Union BBLU-4\/0D-2TC38 is a copper compression lug sized for 4\/0 AWG conductors. It combines a cable-receiving barrel with a mounting tongue, creating a termination that can be matched to both the conductor and the equipment connection. The specific barrel style, mounting pattern and cable construction details make this part identifiable within the Penn Union connector range. The body uses high-conductivity seamless copper tubing, giving the cable termination a continuous tubular construction. The tin plating provides the corrosion-resistant finish described for this connector. The long barrel provides an extended section for the cable termination. Where the installation calls for this barrel format, it should be allowed for in the cable approach and available connection space. A beveled entry helps guide the cable into the barrel during assembly. The closed transition encloses the conductor end where the barrel meets the tongue. This geometry provides protection at the end of the cable while maintaining the separate cable and mounting sections of the lug. The two-hole mounting arrangement provides two fastening positions on the tongue. It is suited to a mounting surface with the corresponding hole pattern, making both stud size and center-to-center spacing relevant to the equipment fit. The specified stud or bolt opening is 3\/8 inch, with 1.00 inches between mounting-hole centers. The specified conductor matches are Class B \u0026amp; C building wire: 4\/0 AWG; Class K Weld Cable: 3\/0 AWG; Navy Cable: #200; Diesel Locomotive Cable: 3\/0 AWG; Class H Cable: 3\/0 AWG; Class G Cable: 3\/0 AWG; Class M Flexible Cable: 2\/0 AWG. These sizes are tied to the named cable classes; the building-wire size should not be treated as an interchangeable rating for every flexible cable construction. The purple color code provides an additional identification reference when matching this connector to the specified installation tooling. Dimensional references for this part are W = 1.00 inches, C = 1.83 inches, T = 0.14 inches, B = 1.63 inches, L = 3.93 inches. These drawing labels provide a practical reference for checking the termination footprint and space around the connection. Penn Union identifies this connector for applications up to 35 kV, with the application and completed termination subject to the specified installation requirements. The supplied product information identifies UL 486A-B listing and CSA C22.2 No. 65 certification for power applications; the selected cable and tooling combination must follow the manufacturer requirements.\u003c\/p\u003e","brand":"Penn-Union","offers":[{"title":"New","offer_id":67661854638316,"sku":"BBLU-4\/0D-2TC38","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/BBLU-D_3a801f7e-eff1-4ac6-a9c3-f149dc275f7f.png?v=1791303783"}],"url":"https:\/\/www.industrialautomationco.com\/de-de\/collections\/penn-union.oembed","provider":"Industrial Automation Co.","version":"1.0","type":"link"}