{"title":"GE Fanuc Emerson | Versamax","description":"\u003cp\u003eVersaMax PLCs are modular controllers aimed at mid‑range applications. They support a variety of CPU modules and can be expanded with discrete, analog and specialty I\/O, plus communication modules for Genius, Profibus, DeviceNet and Ethernet. Hot‑swap capability and IEC‑61131‑3 programming languages are positives. However, the product is not cutting‑edge: the CPUs are limited compared with today’s PACs, and reliance on legacy networks may hinder integration. Use VersaMax if you need compatibility with GE’s installed base; otherwise evaluate newer systems offering higher performance and simpler networking.\u003c\/p\u003e","products":[{"product_id":"ge-fanuc-ic200mdd849","title":"GE Fanuc IC200MDD849","description":"\u003cp\u003eThe IC200MDD849 is a discrete mixed I\/O module from the VersaMax PLC series, designed by GE Fanuc Automation. This compact module integrates a total of 16 I\/O points, comprising eight sourcing or positive logic type inputs and eight relay outputs. The output relays are Form A with moving armature and silver contacts, and each input point is connected to a ground return. Notably, the output points are individually isolated on separate channels and can support up to 2 amperes of current per output. The device does not offer protection methods such as snubbers, metal oxide varistors, or fuses. Power for the IC200MDD849 is supplied via a 5V backplane, from which each active input and output point draws power, with a maximum consumption of 295 milliamps. It is important to note that thermal derating is not supported. The input voltage operates within a range of 0 to 132 volts AC at a frequency of 47 to 63Hz, with a nominal value of 120 volts. The input \"on\" state voltage ranges from 70 to 132 volts AC, while the \"off\" state is 0 to 20 volts AC, requiring a minimum \"on\" current of 5 milliamps and a maximum \"off\" current of 2.5 milliamps. Output voltage capabilities are extensive, allowing for 0 to 125 volts DC (with nominal values of 5, 24, and 125 volts) or 0 to 265 volts AC (with nominal values of 120 and 240 volts). The output voltage drop is limited to a maximum of 0.3 volts, and since the output points use an open contact configuration, leakage current is not applicable. The reactive input impedance is measured at 8.6 kOhms at 60Hz and 10.32 kOhms at 50Hz, ensuring compatibility with various control applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964467106028,"sku":"IC200MDD849","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_beb280e4-d070-427a-b04d-d4cc5afab826.png?v=1762701502"},{"product_id":"ge-fanuc-ic200mdl144","title":"GE Fanuc IC200MDL144","description":"\u003cp\u003ePart Number: IC200MDL144  \n\u003cbr\u003eThe IC200MDL144 is a 240 VAC Isolated Input Module designed with four isolated discrete inputs, utilizing positive logic or sourcing type inputs. This module detects current from AC input devices and returns it to the common terminal during operation. Connections to input devices are made through dedicated input and common terminals. Power is supplied by the backplane, with intelligent processing handled by the Network Interface Unit (NIU) or Central Processing Unit (CPU). The module features LED indicators for on\/off status and backplane power presence. To ensure compatibility, the IC200MDL144 requires a box, barrier, or spring-style carrier with revision B or later and is not compatible with connector-style carriers. Isolation capabilities are rated at 250 VAC continuous and 1500 VAC for one minute between user inputs and logic\/frame ground, as well as for point-to-point connections. The backplane current consumption at 5V is consistently 30 mA, with an input voltage range of 0 to 264 VAC, nominally 240 VAC. Prior to installation, it is crucial to inspect the module and its components for any signs of damage. Any damaged components must be promptly replaced to prevent potential harm to other modules on the backplane, particularly concerning incorrect hot insertion practices.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482212076,"sku":"IC200MDL144","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_fcc2ad1d-7953-4161-9f16-344f1f31710c.png?v=1762701549"},{"product_id":"ge-fanuc-ic200pwr202","title":"GE Fanuc IC200PWR202","description":"\u003cp\u003ePart Number: IC200PWR202\u003c\/p\u003e\n\n\u003cp\u003eThe IC200PWR202 is a versatile power supply module designed for the VersaMax industrial automation system, produced by GE Intelligent Platforms Control Systems Solutions. This module supplies power to various backplane devices, including central processing units, network interface units, and input\/output modules. It can serve as either a primary power source or as supplementary power when connected to a power supply booster carrier. With dimensions of 5.25 inches in height (133.4 mm), 1.93 inches in width (49 mm), and 1.54 inches in depth (39 mm), the IC200PWR202 supports an input voltage range of 9.6 to 15 volts DC, with a nominal value of 12 VDC. The input power rating is 11 watts, and it offers a holdup time of 10 milliseconds.\u003c\/p\u003e\n\n\u003cp\u003eThis module features two selectable output voltages: 5 volts DC and 3.3 volts DC. When configured for 3.3 volts DC, it provides a maximum output current of 1.0 ampere, while at 5 volts DC, it supplies up to 1.5 amperes. Total output current must not exceed 1.5 amperes to maintain safe operation. The inrush current is 25 amperes at 12 volts DC and 30 amperes at 15 volts DC. For optimal performance, the DC- terminal should be securely grounded to either the frame ground or earth ground. As the DC- terminal is grounded internally within the module, floating power supplies are not viable. The IC200PWR202 is equipped with protective features, including short circuit protection, overload protection, and reverse voltage polarity protection, ensuring reliable operation in demanding environments.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482310380,"sku":"IC200PWR202","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_ffe57692-b8c4-4197-97d1-8de7dc86f97b.png?v=1762701548"},{"product_id":"ge-fanuc-ic200mdd846","title":"GE Fanuc IC200MDD846","description":"\u003cp\u003eThe IC200MDD846 is a versatile mixed module from GE Automation and Controls, designed for enhanced modular flexibility in industrial automation systems. This module integrates eight discrete input points and eight discrete output points, allowing for efficient management of signal processing within a single unit. It requires an IC200CHSxxx carrier base to operate effectively. The input points are compatible with sourcing-type and positive logic configurations, drawing electrical current from connected devices to a common line. With output points rated for a current load of up to 2 amperes, this module features Form A relays equipped with a fixed coil, moving armature, and silver contact, ensuring reliable operation and electrical isolation for each output. Status indication is facilitated by dedicated LED lights for each input and output point, supplemented by an 'OK' LED that alerts users to the presence of backplane power. The IC200MDD846 enables the transfer of eight bits of discrete input and output data; however, it requires integration with a central processing unit (CPU) or network interface unit (NIU) to enable intelligent processing. Power consumption is limited to a maximum of 300 milliamps from the backplane, with nominal input voltage specifications at 120 volts AC. The module supports output voltages of 5, 24, and 125 volts DC, as well as 120 and 240 volts AC, with an output voltage drop of 0.3 volts. Notably, this device does not support thermal derating, making it a robust choice for automation applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482441452,"sku":"IC200MDD846","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_95beeb9a-6fa4-486b-8579-64f2157c1847.png?v=1762701550"},{"product_id":"ge-fanuc-ic200cpu001","title":"GE Fanuc IC200CPU001","description":"\u003cp\u003eThe IC200CPU001 is a versatile CPU belonging to GE's Versamax series, tailored for industrial automation and control applications. This compact module measures 66.8 mm x 128 mm and features two software-configurable serial ports—RS-232 and RS-485—which facilitate SNP and RTU slave or serial I\/O operations. The IC200CPU001 includes nonvolatile flash memory for reliable program storage, complemented by battery-backed RAM to ensure data integrity. Upon powering up, the module initiates an auto-configuration process, identifying all installed modules beginning at slot 1 and halting at the first empty slot or faulted module. By default, both ports operate in SNP slave mode and revert to this configuration when the CPU is in Stop mode. Port 1 serves as a boot loader for CPU firmware upgrades, while Port 2 can supply power to external devices requiring 100 mA or less at 5VDC. The design includes threaded screw locks for secure connections, ensuring stable communication between the CPU and multiple serial devices.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482474220,"sku":"IC200CPU001","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_14f7e96c-01cb-42b5-9a9c-86939fb02142.png?v=1762701551"},{"product_id":"ge-fanuc-ic200chs015","title":"GE Fanuc IC200CHS015","description":"\u003cp\u003eThe IC200CHS015 is a Spring-Style Interposing I\/O Terminal designed for seamless integration between Connector-Style I\/O Carriers and field wiring, specifically within the GE Fanuc Versamax series. This unit is equipped with a connector for cable attachment to the I\/O carrier and features 36 spring-clamp style terminals for reliable connections. A transparent hinged door protects the wiring terminals while allowing easy access, and each I\/O module includes a foldable board that can be housed within this door. For applications requiring additional field wiring connections, one or more auxiliary I\/O terminal strips can be directly integrated into the lower edge of the IC200CHS015. Installation flexibility allows users to mount the interposing I\/O terminals on the same DIN rail as the connector-style I\/O carrier or on a separate DIN rail. To ensure maximum resistance to mechanical vibration and shock, it is important to install these terminals on specialized panels, with steel DIN rail recommended for durability. The DIN rail must also be electrically grounded to provide electromagnetic compatibility (EMC) protection, and it should feature a conductive, corrosion-resistant finish that is ideally unpainted. For optimal vibration resistance, screws should secure the DIN rail to the panel approximately 6 inches (15.24 cm) apart, and DIN-rail clamps should be used at both ends of the station to maintain proper positioning.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482572524,"sku":"IC200CHS015","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_cfcb6feb-b931-436d-997d-e305bb4e9aa1.png?v=1762701550"},{"product_id":"ge-fanuc-ic200tbm005","title":"GE Fanuc IC200TBM005","description":"\u003cp\u003eThe GE Fanuc IC200TBM005 is an auxiliary terminal strip designed for input\/output (I\/O) connections, featuring a spring clamp style for secure wiring. This unit includes 18 internally-bussed wiring terminals, allowing for enhanced field wiring options for Interposing I\/O Terminals and terminal-style I\/O carriers. The IC200TBM005 is equipped with mounting tabs for easy attachment to existing carriers and can be swiftly installed in the slots found on the bottom of the Interposing I\/O Terminals or I\/O Carrier. Additional auxiliary terminal strips can be seamlessly connected as required. For applications subjected to high vibration, the terminal strip includes panel-mount holes that provide increased stability. It supports a current rating of up to 8 Amps and can handle voltage levels of up to 264 V AC, with the capacity to withstand up to 300 V AC without sustaining damage. Importantly, there is no electrical connection between the Interposing I\/O Terminals or Terminal-Style I\/O Carrier and the Auxiliary I\/O Terminal Strip, necessitating user-provided electrical references when required.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482638060,"sku":"IC200TBM005","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_0dc2ce46-c8d4-4e45-b416-be4c16a888f6.png?v=1762701551"},{"product_id":"ge-fanuc-ic200mdl741","title":"GE Fanuc IC200MDL741","description":"\u003cp\u003eThe IC200MDL741 is a high-performance output module designed for the VersaMax series by GE Automation and Controls. Featuring a single grouping of 16 discrete signal output points, this module can operate either as a sourcing type or a positive logic type, allowing it to effectively control and supply current to connected loads. To ensure optimal operation, an external 5V power supply is required, with a maximum current draw of 75 milliamps. It is crucial that the external power source provides adequate field power, particularly during short circuit conditions, to maintain proper functionality and prevent voltage drops below specifications. The IC200MDL741 operates optimally at 24 volts DC but is compatible with a range of 18 to 30 volts DC. It can handle resistive loads with a current capacity of up to 0.5 amps at 30 volts DC, along with a maximum inrush current of 2.0 amps for 100 milliseconds. Output leakage is rated at 0.5 milliamps. \u003c\/p\u003e\n\n\u003cp\u003eThis module incorporates several protective features, including Electronic Short Circuit Protection (ESCP), overcurrent protection, and free-wheeling diodes for each output point, with a steady state overcurrent tripping range of 0.7 amps to 2.5 amps. It is important to note that the IC200MDL741 does not support individually isolated channels. The on and off response time is a rapid 0.5 milliseconds, and thermal derating is available to accommodate variable operating conditions. The number of output points that can be simultaneously activated is contingent upon specific environmental factors and voltage levels, ensuring flexibility in diverse applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482670828,"sku":"IC200MDL741","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_701289d3-e5ed-4601-a19d-280769ecec06.png?v=1762701550"},{"product_id":"ge-fanuc-ic200alg326","title":"GE Fanuc IC200ALG326","description":"\u003cp\u003eThe IC200ALG326 is an 8-channel, 13-bit analog output module designed for the GE Fanuc Versamax Series, providing reliable performance in various industrial applications. Each of the module’s eight single-ended channels operates collectively, offering current-sourcing outputs in both the 4-20 mA and 0-20 mA configurations. In the 0-20 mA mode, an output of 0 mA corresponds to a %AQ value of 0 counts, while 20 mA is represented by a %AQ rate of +32,000 counts. When configured in the 4-20 mA range, the output of 4 mA aligns with 0 %AQ counts, and 20 mA reflects +32,000 %AQ counts. The IC200ALG326 features automatic adjustments for negative value commands, ensuring they default to a 0 mA output regardless of the specified range when the module is installed in a PLC rack. When connected to a Network Interface Unit, any negative command values are set to the low end of the designated range. This module incorporates a configurable output range via a jumper, which also facilitates maintaining the outputs' last states or default settings in the event of backplane power or communication interruptions. It is noteworthy that incorrect hot insertion of the module may disrupt the function of adjacent modules on the same backplane. The IC200ALG326 operates within a voltage range of 18-30 VDC, with a power consumption of 50 mA from the +5V bus and comes equipped with LED indicators for field power and operational status.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482703596,"sku":"IC200ALG326","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_445b7f71-1410-4c6e-8a45-9e46f92abf82.png?v=1762701552"},{"product_id":"ge-fanuc-ic200mdl635","title":"GE Fanuc IC200MDL635","description":"\u003cp\u003ePart Number: IC200MDL635  \n\u003cbr\u003eThe IC200MDL635 is a 48VDC Positive\/Negative Logic Discrete Input Module designed by GE Fanuc to enhance control system efficiency. This module features two sets of eight discrete inputs, providing a total of 16 inputs that can be configured for either positive or negative logic. In positive logic configuration, the inputs receive current from connected devices and return it to the common terminal, while in negative logic configuration, the current flows from the common to the input devices. The input devices are interfaced through the input and common terminals of the module. Operational power is supplied via the backplane, facilitating reliable functionality. The IC200MDL635 transmits 16 bits of discrete input data, with individual green LED indicators displaying the on\/off status of each input. It is essential for backplane power to be available for the LEDs to function correctly, with the green OK LED illuminating only when power is established. This module boasts a rapid input response time of 0.5 ms, ensuring prompt data processing within industrial control applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482736364,"sku":"IC200MDL635","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_75e39d88-a2ad-4b76-8632-983e5834cd3e.png?v=1762701551"},{"product_id":"ge-fanuc-ic200mdl244","title":"GE Fanuc IC200MDL244","description":"\u003cp\u003ePart Number: IC200MDL244\u003c\/p\u003e\n\n\u003cp\u003eThe IC200MDL244 is a VersaMax Isolated Input Module designed for 240 VAC applications, featuring eight discrete positive logic inputs. This sourcing-type module allows for the connection of AC input devices, with the current return directed to a common that is individually isolated for each input. The module receives power from the backplane, and the intelligent processing is provided by either the CPU or Network Interface Unit (NIU). Standard features include status indicators in the form of LEDs, which signify backplane power and the operational state of each input point.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for robust operation, the IC200MDL244 ensures isolation between user input and logic\/frame ground of 250 VAC continuous or 1500 VAC for a duration of one minute, accommodating nominal input voltages of 240 VAC or a range from 0 to 264 VAC. The accepted on and off state voltage ranges from 155 to 264 VAC and 0 to 40 VAC, respectively, with corresponding input currents of a minimum of 7 mA and a maximum of 1.5 mA. The module exhibits input impedance of 38.5 kΩ at 60 Hz and 46.3 kΩ at 50 Hz.\u003c\/p\u003e\n\n\u003cp\u003eInstallation consideration is essential, and it is recommended that users inspect all components for shipping damage prior to installation, as any damage could adversely impact performance. Users should utilize wiring diagrams available online and ensure compatibility with compact or terminal-style carriers, as connector-style carriers are not suitable due to enhanced isolation requirements. Proper installation protocols should always be adhered to, particularly to prevent adverse effects on modules during incorrect hot insertion.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482769132,"sku":"IC200MDL244","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_c8445096-0188-429d-9bfc-c2a69cdbc7d3.png?v=1762701550"},{"product_id":"ge-fanuc-ic200chs122","title":"GE Fanuc IC200CHS122","description":"\u003cp\u003ePart Number: IC200CHS122  \n\u003cbr\u003eThe IC200CHS122 is a Fuse-Style 16-point Interposing I\/O Terminal designed by GE Fanuc for the VersaMax series. This terminal serves as an interface connector-style I\/O carrier, facilitating the connection of field wiring while incorporating an integrated fuse solution for field devices linked to VersaMax I\/O modules. There are two distinct types of interposing I\/O terminals available: the main base, cataloged as IC200CHS121, and the expansion base, IC200CHS122. The main base corresponds to the \"A\" terminals on the VersaMax I\/O module, whereas the IC200CHS122 accommodates the additional \"B\" terminals, making it essential for complete system integration. This module features a connector (J1) that links to the connector-style I\/O carrier and provides 36 box-style terminals for field I\/O wiring and power connections. It offers connections for terminals A1-A18 and includes two groups of common terminals for straightforward wiring of two-wire devices without needing extra auxiliary terminal blocks. Individual 0.5A fuses exist for each terminal, ensuring protection between the terminal and its corresponding pin on the VersaMax cable connector. Additionally, the IC200CHS122 is equipped with an expansion connector (J2) that links to another IC200CHS122 unit, ensuring consistent connectivity across all terminals. Built-in auxiliary terminals are conveniently positioned beneath terminals A and B, optimizing functionality for basic two-wire connections in field applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482801900,"sku":"IC200CHS122","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_7c3c521e-f761-493a-8e4e-1b76c96860da.png?v=1762701552"},{"product_id":"ge-fanuc-ic200alg240","title":"GE Fanuc IC200ALG240","description":"\u003cp\u003eThe GE Fanuc IC200ALG240 is a versatile Analog Input Module designed for the VersaMax series. It features the capability to process signals from up to eight isolated analog devices, delivering data output with a resolution of 16 bits. The module operates in two modes: voltage mode, with an input range of ±10 volts, and current mode, with a range of 4 to 20 milliamps. Integrated diagnostic features allow for open wire detection and enable users to configure various parameters, such as alarm levels and scaling of individual channels, through software.\u003c\/p\u003e\n\n\u003cp\u003eWith a data update rate of 20 milliseconds at a 50 Hz filter frequency and 16.7 milliseconds at a 60 Hz filter frequency, the IC200ALG240 ensures timely data reporting. It is equipped with diagnostic LED indicators that communicate module status, power status, and fault conditions, including field power loss and NVRAM faults. The module measures 4.3 inches (110 mm) in width, 2.63 inches (66.8 mm) in height, and 1.956 inches (50 mm) in depth, exclusive of the carrier or connector height. Power is supplied through 5V and 3.3V backplane connections, requiring a maximum of 15 milliamps and 120 milliamps respectively.\u003c\/p\u003e\n\n\u003cp\u003eThe IC200ALG240 functions with an external power supply rated between 19.5-30V DC and 100 milliamps, serving applications that operate at 50 to 60 Hertz frequency while ensuring reliable isolation with a user input-to-logic isolation of 250 volts AC and channel-to-channel isolation also rated at 250 volts AC. This robust design makes the IC200ALG240 an essential component for precise analog signal processing in industrial automation systems.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482834668,"sku":"IC200ALG240","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_577d088b-47ee-4197-8005-3e76a684d36e.png?v=1762701554"},{"product_id":"ge-fanuc-ic200mdl241","title":"GE Fanuc IC200MDL241","description":"\u003cp\u003ePart Number: IC200MDL241 \u003c\/p\u003e\n\n\u003cp\u003eThe IC200MDL241 is a 16-point VersaMax AC Input Module designed to facilitate positive logic input configurations. This discrete input module receives current from AC input devices and returns it via the common terminal, with devices connected between input and common terminals. It efficiently provides 16 bits of discrete input data, utilizing power from the backplane while relying on the CPU or Network Interface Unit (NIU) for intelligent processing. Each module is equipped with LED indicators that display the on\/off status for each input point as well as an OK indicator to confirm backplane power presence. During installation, it is crucial to inspect the module for any damage; any noted defects must be reported for replacement, as damaged units can lead to operational issues when connected to the CPU. Wiring diagrams and installation instructions can be easily accessed online. Users should be cautious with hot insertion, as improper handling may disrupt the operation of other modules on the same backplane. The IC200MDL241 supports a voltage range of 0 to 264 VAC, with a nominal rating of 240 VAC, and does not require derating at voltages up to 240 VAC. However, if voltages exceed 240 VAC, the simultaneous operational capacity depends on ambient temperature and external voltage conditions. The module offers isolation with an input to logic and frame ground rating of 250 VAC continuous or 1500 VAC for one minute. Notably, the on and off response times are a maximum of one cycle and two cycles, respectively. The installation of this module necessitates awareness of its explosion hazard classification, and substitution of components is strictly prohibited.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482867436,"sku":"IC200MDL241","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_f13490d4-be91-47cf-89dd-2e077459e7ec.png?v=1762701551"},{"product_id":"ge-fanuc-ic200chs003","title":"GE Fanuc IC200CHS003","description":"\u003cp\u003eThe IC200CHS003 is a connector-style carrier I\/O designed by GE Fanuc Automation to facilitate effective communication and connectivity within industrial control systems. Weighing 0.113 kilograms, this carrier features a robust 36-pin connector for seamless attachment of Input\/Output cables, thereby enabling integration with a wide range of I\/O modules. The IC200CHS003 provides essential provisions for backplane communication, mounting, and field wiring for a single I\/O module, including a module latch hole for secure fastening. It supports the wiring of up to 32 input\/output points and accommodates four common power connections efficiently. \u003c\/p\u003e\n\n\u003cp\u003eThis carrier is designed for effortless DIN rail mounting, with dimensions of 7.5 mm x 35 mm, ensuring a secure fit when snapped onto the rail. For electromagnetic compatibility (EMC) protection, it is essential that the DIN rail is electrically grounded and features a conductive, corrosion-resistant finish. Field wiring is conducted directly onto the connector style, utilizing contacts that can be crimped to the wire ends. The I\/O devices can connect directly to interposing I\/O terminals.\u003c\/p\u003e\n\n\u003cp\u003eInstallation of a pre-wired connecting cable is simplified; the cable connector is positioned over the carrier's connector and pressed downward to engage the latch. Removal of the cable requires lifting the latch while holding the connector. Users should exercise caution to avoid direct contact with the connector during high ambient temperature conditions, and should steer clear of exposed connector pins.\u003c\/p\u003e\n\n\u003cp\u003eFor flexibility in cable fabrication, a connector kit is available, which includes a connector and cover, six large contacts, two screws, and 36 small contacts. The IC200CHS003 carrier is compatible with all VersaMax modules, with the exception of select models due to their high isolation requirements, specifically the IC200MDL144 (240 VAC 4 Point Isolated Module) and the IC200MDD850 (Mixed 240 VAC Isolated 4 Point Output Relay, 2.0A Isolated 8 Point Module).\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482900204,"sku":"IC200CHS003","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_113f0812-50d5-42ab-8619-97b8fe70dd07.png?v=1762701552"},{"product_id":"ge-fanuc-ic200mdl930","title":"GE Fanuc IC200MDL930","description":"\u003cp\u003ePart Number: IC200MDL930\u003c\/p\u003e\n\n\u003cp\u003eThe IC200MDL930 is an output module within the GE Automation VersaMax family, featuring eight Form A relay output points suitable for both alternating and direct current loads. When the central processing unit is active and the corresponding output logic bit is set to “1,” the contact points close, enabling signal output. This module is integrated with the network interface unit and central processing unit, both of which execute intelligent processing on the eight bits of output data. The operational power is supplied directly from the rack-mounted backplane, drawing 245 milliamps from a 5V output backplane; however, an external power source is required for positive or negative load switching applications. Each output point can handle a minimum load current of 10 milliamps and is characterized by open contacts, eliminating output leakage current. The relays consist of a fixed coil and a moving armature, with contact surfaces made of silver alloy. The ON\/OFF response time for the IC200MDL930 is 10 milliseconds, which is slightly longer compared to other modules in the VersaMax series, with a switching frequency of 20 cycles per minute for inductive loads. Additionally, this module provides channel-to-channel isolation, although it does not include internal protection measures such as fuses or snubbers, and does not require thermal derating. The status of the output points is indicated by LED lights corresponding to their ON\/OFF conditions.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482932972,"sku":"IC200MDL930","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_aca42ea7-ce9f-4595-8990-15b0ecac3846.png?v=1762701551"},{"product_id":"ge-fanuc-ic200ebi001","title":"GE Fanuc IC200EBI001","description":"\u003cp\u003ePart Number: IC200EBI001\u003c\/p\u003e\n\n\u003cp\u003eThe IC200EBI001 is a versatile Ethernet Network Interface Unit (ENIU) designed for use with the Versamax series from GE Fanuc. Functioning as an Ethernet slave module, it facilitates control over a dedicated set of I\/O modules. This unit features a power supply that can be installed directly on the Network Interface Unit, ensuring straightforward operation. Five integrated LEDs provide real-time status indicators for the IC200EBI001 and its components. Installation is user-friendly; the module mounts easily onto a DIN rail by simply clicking it into position. Proper power installation requires the latch to be in the unlocked position, aligning all connectors with the latch post. Once the power supply module is securely pressed and locked in place, the latch must be engaged for optimal security. \u003c\/p\u003e\n\n\u003cp\u003eThe IC200EBI001 supports autoconfiguration, allowing for seamless setup. Upon initial power-up, the ENIU automatically configures the attached modules within the I\/O station, halting at the first empty slot or if a module malfunctions. Should autoconfiguration fail, clearing previous configurations can be achieved by disconnecting the power and removing the ENIU from the first I\/O carrier. Supporting up to eight racks with eight modules each, the IC200EBI001 can handle I\/O data up to 1024 bytes. It operates at an Ethernet data rate of 10\/100 Mbits and features full\/half auto-detect Ethernet duplex capabilities, with a power consumption of 5V at 175 mA and 3.3V at 425 mA. \u003c\/p\u003e\n\n\u003cp\u003eThe IC200EBI001 is an essential component for enhancing the functionality and efficiency of industrial automation systems.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482965740,"sku":"IC200EBI001","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_1173c354-0944-4928-88f7-f4c6dfa3104f.png?v=1762701551"},{"product_id":"ge-fanuc-ic200alg630","title":"GE Fanuc IC200ALG630","description":"\u003cp\u003eThe GE Fanuc IC200ALG630 is a 16-bit thermocouple analog input module designed to accept up to seven independent thermocouple or millivolt inputs. Uniquely powered by the backplane power supply, this module eliminates the need for an external power source, enhancing its ease of integration. Each channel of the IC200ALG630 can be configured to provide readings in millivolts, thermocouple inputs, or linearized temperatures in tenths of degrees. The module features LED indicators to display operational status and detect errors, which are logged in the I\/O fault table. At startup, it performs automatic A\/D calibration, with periodic recalibration to accommodate variations in temperature. Digital conversion of thermocouple inputs is executed through a binary value system processed by a built-in microprocessor, which assesses whether inputs fall within the acceptable range. The IC200ALG630 communicates with the host system via seven words of analog input data, complemented by an optional seven words of output data. Compatibility extends across various CPU and NIU versions, including the Versamax, Genius, and DeviceNet NIU. Users can set each active channel to either active or inactive status—inactive channels return zero values—but they can also define low and high alarm limits as needed. If alarms are unnecessary, limit settings can be adjusted outside the operating range to maintain an inactive state. The module offers a thermocouple voltage range of 5 VDC nominal and supports types J, K, T, S, and R. With an update rate of 60 ms and a power consumption of 125 mA from the +5V bus, the IC200ALG630 is an efficient solution for industrial automation applications, operating effectively within 0 to 60 degrees Celsius. Its compact design measures 1.95 x 2.63 x 4.3 inches, making it suitable for various installations.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964482998508,"sku":"IC200ALG630","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_e049e86a-f80b-4f6d-9e9f-cf2bbb2b5a69.png?v=1762701551"},{"product_id":"ge-fanuc-ic200chs101","title":"GE Fanuc IC200CHS101","description":"\u003cp\u003ePart Number: IC200CHS101\u003c\/p\u003e\n\n\u003cp\u003eThe IC200CHS101 is a disconnect-style interposing I\/O terminal from GE's Versamax series, designed for efficient management of control circuits. This module enables individual disconnection of devices connected to it, allowing users to easily isolate inputs or outputs by operating one of the two associated switches, including both the signal and return switch. This functionality ensures that the wiring and overall installation integrity remain intact during maintenance or troubleshooting. The IC200CHS101 is compatible with both main and expansion bases; however, it is essential to verify the completeness and condition of components prior to installation to avoid complications related to shipping damage. The main base features terminals tailored for A terminals, while the expansion base is necessary for modules equipped with B terminals. This interposing disconnect base incorporates a connector for attaching a cable from the connector-style I\/O carrier, along with 36 box-style terminals designated for power connectors and I\/O field wiring. Designed for flexibility, the module supports wiring for ungrouped or isolated I\/O devices and can accommodate configurations where non-isolated modules are used with dedicated terminals. Notably, additional jumpers are typically unnecessary for the IC200CHS101. The terminals can accept one solid or stranded wire ranging from AWG #12 to AWG #24, with the stipulation that if two wires are inserted into a single terminal position, they must be of the same size and type.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483064044,"sku":"IC200CHS101","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_3b26971a-4e68-4114-88a2-2cdb04d729d8.png?v=1762701552"},{"product_id":"ge-fanuc-ic200alg327","title":"GE Fanuc IC200ALG327","description":"\u003cp\u003eThe IC200ALG327 is a sophisticated 12-channel, 13-bit voltage analog output module from the GE Fanuc VersaMax Series, designed to facilitate precise control in industrial automation applications. This module provides 12 independent analog voltage outputs, featuring a bipolar output voltage range of -10VDC to +10VDC and a unipolar output range from 0V to +10VDC. Intelligent processing is handled by a connected CPU or Network Interface Unit, and an external power supply is required for the output functionality. The IC200ALG327 includes LED indicators for real-time status monitoring; a green OK LED indicates active backplane power. Configuration options are provided via jumpers, allowing users to customize the output range and output state retention during power loss or communication interruptions. When no jumpers are applied to the designated pins, the module defaults to its standard output configuration. Should field or backplane power be removed, appropriate jumper settings can facilitate a change in output range. The IC200ALG327 operates with an update rate of 15 milliseconds and consumes 50 mA from the +5V bus, ensuring efficient operation in demanding environments.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483096812,"sku":"IC200ALG327","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_476c1abe-4459-4217-9fb2-5db540cae5e0.png?v=1762701556"},{"product_id":"ge-fanuc-ic200mdl644","title":"GE Fanuc IC200MDL644","description":"\u003cp\u003eThe GE Fanuc IC200MDL644 is a versatile 32-point Positive Negative Logic Input Module designed for the VersaMax series, operating at 5\/12 VDC. This module features four groups, each containing eight discrete inputs that can be configured for either positive or negative logic. In positive logic, inputs receive current from the input device and return it to the common, whereas negative logic inputs operate by receiving current from the common and returning it to the input device. This flexibility allows the module to accommodate a variety of input devices connected between the input and common terminals, making it particularly suitable for applications requiring compatibility with TTL devices, which necessitate a negative logic configuration. The IC200MDL644 is powered through the backplane, with data processing managed by the associated CPU or NIU. Each input point is monitored by individual green LEDs that indicate its on\/off status, with visibility dependent on backplane power availability. The module boasts a swift basic input response time of 0.25 ms, ensuring reliable performance in dynamic control environments.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483129580,"sku":"IC200MDL644","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_8911069c-3698-49ac-b15c-edc69baee866.png?v=1762701553"},{"product_id":"ge-fanuc-ic200alg230","title":"GE Fanuc IC200ALG230","description":"\u003cp\u003eThe IC200ALG230 is a high-performance Analog Input Module from GE Fanuc's VersaMax series, designed to accommodate industrial automation needs. This module supports four single-ended channels, which can be configured to accept either voltage or current inputs. Each channel boasts a resolution of 12 bits, with a default bipolar input voltage range of +\/- 10 volts DC and an unipolar option ranging from 0 to 10 volts. In current mode, it operates within a range of 4 to 20 milliamps. The module receives power directly from the embedded backplane, consuming 125 milliamps at 5 volts, eliminating the need for an external power source for operation, though external power is necessary for user transceivers. Status indicators include an OK LED for backplane power and an INT PWR LED for analog field circuit power, with the capability to report any internal power loss. Configuration for voltage or current operation is accomplished using two jumpers located on the carrier terminals, which also allow for bipolar or unipolar mode settings. The IC200ALG230 is compatible with field wiring for carriers with two or three rows of terminals, ensuring flexible and robust integration into various applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483293420,"sku":"IC200ALG230","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_b6029187-e74a-4d73-8380-49012d38f091.png?v=1762701552"},{"product_id":"ge-fanuc-ic200alg260","title":"GE Fanuc IC200ALG260","description":"\u003cp\u003eThe IC200ALG260 is an advanced 8-channel, 12-bit Voltage\/Current Analog Input Module from the GE Fanuc Versamax series, designed to offer robust data acquisition capabilities from up to eight individual analog devices. This intelligent module features eight isolated inputs, ensuring reliable signal integrity and minimizing noise interference. It supports configurable input options for 4-20 mA current or ±10 V voltage inputs on a per-channel basis and provides input data with a resolution of 16 bits. The module is further enhanced with a selectable input filter and pre-configured settings for default values and under\/over range levels. Diagnostic capabilities are integral, allowing users to monitor for conditions such as under\/over range, open wire events, loss of power, and memory faults, all highlighted by built-in LED indicators for quick visual feedback. To operate, the IC200ALG260 requires a 24 V power supply connected to terminals A17 and A18. For optimal accuracy, current inputs should be applied with positive current flow, ensuring that the negative terminals of the channels are connected appropriately. This module is compatible with PLC CPU firmware version 1.20 or higher and is designed for easy installation, particularly on terminal-style I\/O carriers. Key specifications include a voltage range of -10 to +10 VDC and a current range of 4-20 mA, with an update rate of 0.4 milliseconds and an input filter response of 5 milliseconds. The compact dimensions of the module are 4.3 x 2.63 x 1.956 inches, making it suitable for various applications within industrial environments.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483162348,"sku":"IC200ALG260","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_065c1a4e-b52d-49a2-84e7-3d0547466b65.png?v=1762701551"},{"product_id":"ge-fanuc-ic200alg261","title":"GE Fanuc IC200ALG261","description":"\u003cp\u003eThe IC200ALG261 is an advanced 8-channel, 15-bit analog input module from the GE Fanuc VersaMax Series, designed to interface with eight differential voltage inputs. This module operates without the need for an external power source, drawing power directly from the backplane supply; however, external power is required for user transceivers. It features a group of eight differential input channels with 15-bit conversion resolution and offers software-configurable selection capabilities. The IC200ALG261 is rated for continuous input logic of 250 VAC, incorporates LED indicators for status monitoring, and provides a 5V output with a maximum backplane current consumption of 200mA. The module includes diagnostics to indicate any loss of internal power, but users should be aware that severe RF interference may impact accuracy to within +\/- 1 percent. Proper installation is critical; all equipment must be inspected for damage prior to installation, and incorrect hot insertion of the module can disrupt operation of adjacent modules on the same backplane. For optimal performance, shielded twisted cables are recommended for connecting the analog channels, with grounding ideally done at the source device. If this is not feasible, grounding through the I\/O module itself is necessary. Additionally, an auxiliary I\/O terminal strip can be added to accommodate additional shield connections. The IC200ALG261 is compatible with multiple firmware versions, including PLC CPU version 2.1 or later and Ethernet NIU EBI001 version 1.10 or later. Key technical specifications include a voltage range of -10 to +10 volts DC and an update rate of 7.5 ms.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483195116,"sku":"IC200ALG261","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_099ec16c-b05d-4bcd-b9d3-b45025ac7a4d.png?v=1762701553"},{"product_id":"ge-fanuc-ic200gbi001","title":"GE Fanuc IC200GBI001","description":"\u003cp\u003eThe IC200GBI001 is a Genius Network Interface Unit from GE Fanuc, part of the VersaMax series, designed to facilitate control functions for an array of connected input and output modules. Compatible with various systems including Series 90-70 programmable logic controllers, Genius Bus Controllers, and PacSystems RX7i and RX3i controllers, this unit requires the appropriate firmware version for optimal performance. Each IC200GBI001 can support eight modules per rack, with a maximum of eight racks, enabling a robust setup for complex applications. The network interface unit allows for 128 bytes of network inputs per bus scan and provides a comprehensive I\/O memory capacity of 1024 discrete points, plus 128 bytes for both analog input and output. It operates at two power levels: 5 volts at 250 milliamps and 3.3 volts at 10 milliamps, and features a serial bus address range of 0 to 31. Data transfer rates can be achieved at 153.6 Kbaud (standard and extended), 76.8 Kbaud, or 38.4 Kbaud, though actual rates may vary based on physical distance and the number of devices connected. Additional capabilities include support for 64 analog input and output channels, removable connectors, compatibility with both shielded twisted pair (STP) and fiber optic cables, and advanced diagnostics via Enhanced Diagnostics Mode (EDM). This unit also offers redundancy options for media and hardware. The physical dimensions of the IC200GBI001, excluding the attached power supply, are 5.25 inches (133.4 millimeters) in width and 3.38 inches (85.9 millimeters) in height.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483227884,"sku":"IC200GBI001","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_f0f4715c-6e75-42f6-ac7a-b99c6e3d2ea2.png?v=1762701553"},{"product_id":"ge-fanuc-ic200mdl243","title":"GE Fanuc IC200MDL243","description":"\u003cp\u003eThe IC200MDL243 is a 120 VAC Discrete Input Module from the GE Fanuc VersaMax series, featuring 16 isolated input points configured for positive logic or sourcing types. This module is designed to receive current from AC input devices, with the return current routed through individual common terminals. The device is powered via the backplane, requiring a CPU or Network Interface Unit (NIU) for intelligent processing. Each input point is equipped with LED indicators that display both backplane power status and the on\/off state for each input. The IC200MDL243 offers isolation of user inputs from logic and frame ground up to 250 VAC continuous or 1500 VAC for one minute, with a nominal input voltage range of 120 VAC (0 to 132 VAC). The operational voltage levels for the on state range from 70 to 132 VAC, while off state levels range from 0 to 20 VAC; the minimum and maximum on state current are 5 mA and 2.5 mA, respectively. Input impedance is rated at 8.6k Ohms at 60 Hz and 10.32k Ohms at 50 Hz under typical conditions. To ensure optimal performance, it is advisable to inspect the module for any shipping damage prior to installation; damaged components should be replaced. The IC200MDL243 does not require derating when mounted vertically (positions A, B) on a DIN rail, although horizontal mounting may necessitate derating at 132 VAC. Users must adhere to proper hot insertion procedures to prevent adverse effects on adjacent modules on the backplane.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483260652,"sku":"IC200MDL243","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_b35e3373-2598-4e6f-8a3c-9794b536e93e.png?v=1762701553"},{"product_id":"ge-fanuc-ic200alg266","title":"GE Fanuc IC200ALG266","description":"\u003cp\u003eThe IC200ALG266 is a TÜV-approved analog input module from GE Fanuc, designed for the Versamax series and rated for use in SIL2 applications. This module features 15 single-ended channels with a 15-bit voltage resolution, providing an effective interface for current inputs while sharing a common return. It derives its power from the backplane power supply, eliminating the need for an external power source during operation; however, power for connected transceivers must be provided externally. The IC200ALG266 facilitates intelligent processing through the module’s CPU or Network Interface Unit (NIU), allowing for the transmission of 15 words of analog input data. Integrated protection circuitry safeguards the input sense resistors, automatically limiting input current to a maximum of 40mA in the event of an accidental connection to +24V field power. Furthermore, the module opens the input loop when powered off, ensuring that any connected transmitters capable of open wire fault detection will signal an open wire fault, thus preventing erroneous signals to any external receivers in series. The module is equipped with an LED indicator, which illuminates green to confirm backplane power presence, proper functioning of internal field power, successful configuration, or recognition on the backplane. The IC200ALG266 also monitors various fault conditions, reporting loss of internal power for field-side circuits and open wire faults for each channel when operating in 4-20mA mode. Additionally, it utilizes a built-in mechanism to detect A\/D conversion malfunctions, ceasing scans and indicating an Internal Hardware fault after three consecutive detection failures, necessitating a power cycle or module replacement to reset. The module supports a current range of 4-20 mA and 0-20 mA with a 7.5 ms update rate and an input filter response of 24 Hz ±20%. It requires a power consumption of 100 mA from the +5V bus.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483326188,"sku":"IC200ALG266","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_d2a55af0-49e7-46f0-917f-8b8c8aff21b8.png?v=1762701552"},{"product_id":"ge-fanuc-ic200mdl143","title":"GE Fanuc IC200MDL143","description":"\u003cp\u003ePart Number: IC200MDL143 \u003c\/p\u003e\n\n\u003cp\u003eThe IC200MDL143 is a 120 VAC Isolated Input Module designed to provide eight isolated discrete inputs for industrial automation applications. This module supports positive logic or sourcing type inputs, enabling it to receive current from AC input devices while offering a current return on its dedicated common, with each input featuring its own return line. The module derives its operating power from the backplane and relies on the Network Interface Unit (NIU) or central processing unit (CPU) for intelligent processing functions. It is equipped with LED indicators that provide real-time feedback on input states and backplane power status, with green LEDs indicating both on\/off states. \u003c\/p\u003e\n\n\u003cp\u003eThe IC200MDL143 module demonstrates robust isolation capabilities, supporting user input to logic and frame ground up to 250 VAC continuous or 1500 VAC for one minute. It has a maximum backplane current consumption of 50mA at 5V, with no external power requirement or derating needed. The module accepts input voltages of 0 to 132 VAC, with a nominal operating point at 120 VAC; the on-state voltage ranges from 70 to 132 VAC, while the off-state voltage ranges from 0 to 20 VAC. Response times are optimized, with a maximum on response time of 1 cycle and an off response time not exceeding 2 cycles. Prior to installation, a thorough inspection for any physical damage is advised, and any damaged components must be replaced immediately. The IC200MDL143 can be mounted in any orientation without derating, and detailed wiring diagrams and visual references are available online. Care should be taken during hot insertion to avoid disruption of other modules on the same backplane.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483358956,"sku":"IC200MDL143","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_bc54ab3a-f319-4c78-b1c6-43a8d83e0199.png?v=1762701552"},{"product_id":"ge-fanuc-ic200chs111","title":"GE Fanuc IC200CHS111","description":"\u003cp\u003ePart Number: IC200CHS111\u003c\/p\u003e\n\n\u003cp\u003eThe IC200CHS111, manufactured by General Electric Intelligent Platforms, is an interposing relay-based main input\/output base featuring 16 points designed to enhance the protection of connected devices and modules through support for higher amperage outputs. This product is equipped with replaceable relays that are individually fused and include status indication for each relay. The form-C relays utilized in this unit are sourced from Omron Electronics. The IC200CHS111 serves as a main base compatible with both 16-point and 32-point VersaMax modules, with the first 16 points utilized for the 32-point module configuration. It supports a maximum current of up to eight amps and requires an external 24V DC power supply, which connects at the A17 and A18 terminals, specifically designated for the relay coils. \u003c\/p\u003e\n\n\u003cp\u003eThis input\/output terminal features both J1 and J2 connectors; the J1 connector facilitates the connection to the Connector-Style I\/O Carrier and provides 50 terminals for field wiring devices and power connections, utilizing box-style wiring termination with non-integrated field termination. The J2 connector is intended for linking the main base to an interposing relay expansion base, requiring a compatible IC200CBL1xxx cable. The dimensions of the IC200CHS111 are 9.9 inches (253.7 mm) in width, 4.95 inches (126 mm) in height, and 2.8 inches (73 mm) in depth, excluding the height of the DIN rail.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483391724,"sku":"IC200CHS111","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_dcc1c437-de23-4c49-adc4-27b20aeae226.png?v=1762701552"},{"product_id":"ge-fanuc-ic200chs112","title":"GE Fanuc IC200CHS112","description":"\u003cp\u003ePart Number: IC200CHS112\u003c\/p\u003e\n\n\u003cp\u003eThe IC200CHS112 is a Relay-Style Interposing I\/O Terminal designed for use with the GE Fanuc VersaMax series. This module facilitates the switching of high current outputs, supporting up to 8 amps through its dry contact relays. The relays are configured to be activated exclusively by standard 24 Volt DC output modules, specifically the IC200MDL740 and IC200MDL750. Each relay is equipped with an individual LED status indicator and fuse label, enhancing diagnostic capabilities by signaling specific outputs from the VersaMax module. The IC200CHS112 variant operates with points 17-32 of a 32-point VersaMax module and is distinguished from its counterpart, the IC200CHS111, which is used for points 1-16 in the same 32-point configuration or within a 16-point module. The integration of the IC200CHS112 requires a connector (J2) to link the ribbon cable to the expansion connector of the IC200CHS111, along with 50 box-style terminals for connecting power and field input-output wiring. Relay coils necessitate an external 24 VDC power supply, which is connected via terminals B17 and B18 specifically for the expansion base. It is important to note that this power connection is designated exclusively for the relay coils, while user loads should be powered from alternative external sources.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483424492,"sku":"IC200CHS112","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_632f4dfb-3f52-4d29-a2a9-be0d0eff8105.png?v=1762701554"},{"product_id":"ge-fanuc-ic200mdd847","title":"GE Fanuc IC200MDD847","description":"\u003cp\u003eThe IC200MDD847 is a versatile VersaMax I\/O module designed by GE Fanuc, providing a robust solution for mixed input and output applications. This module supports a total of 16 I\/O points, comprising eight discrete sourcing input points and eight Form A relay output points. Each output point is independently isolated on a channel-to-channel basis, ensuring reliable operation; however, it is important to note that the module does not incorporate snubber circuits or internal fuses for input and output protection. Each relay output can drive loads of up to two amperes, while the device handles eight bits of discrete input and output data, necessitating connections to either a CPU or Network Interface Unit (NIU) for processing. \u003c\/p\u003e\n\n\u003cp\u003ePower is supplied from the 5-volt backplane with a maximum current draw of 300 milliamps, and the power consumption increases in correlation with the number of output points activated. The characteristics of the input states indicate an “on” state voltage range of 155 to 264 volts AC and an “off” state voltage range of 0 to 40 volts AC. The physical dimensions of the IC200MDD847 are 2.63 inches (66.8 mm) in height, 4.3 inches (110 mm) in width, and 1.956 inches (50 mm) in depth, excluding any measurements of carriers or connectors. The module does not offer thermal derating capabilities, making it essential to consider operational limits during deployment.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483457260,"sku":"IC200MDD847","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_6cc2bfd0-ef12-47f5-a230-37edba2533e2.png?v=1762701553"},{"product_id":"ge-fanuc-ic200alg620","title":"GE Fanuc IC200ALG620","description":"\u003cp\u003ePart Number: IC200ALG620 \u003c\/p\u003e\n\n\u003cp\u003eThe IC200ALG620 is a VersaMax Analog Input RTD Module designed for industrial automation applications, capable of accepting input from up to four independent RTDs while providing 16-bit resolution. This module uniquely requires no external power supply, as it generates the excitation current for the RTDs based on the configured type. It supports various RTD types, including platinum, nickel\/iron, nickel, and copper, accommodating user preferences. The IC200ALG620 features selectable measurement units in tenths of degrees or ohms, along with configurable resistance ranges of 0-500 or 0-3000 ohms for each channel. \u003c\/p\u003e\n\n\u003cp\u003eStandard functionalities include high\/low detection, open wire, under\/over range, and input short alarms, enhancing system reliability. The module offers two data acquisition rates tailored for 50 or 60 Hz line frequencies and includes LED indicators that signal normal operation, updates, errors, or loss of power on the backplane. Automatic analog-to-digital calibration occurs at power-up and is repeated periodically to adapt to ambient temperature variations.\u003c\/p\u003e\n\n\u003cp\u003eThe IC200ALG620 interfaces with various PLC CPU and Network Interface Unit (NIU) versions 1.10 or higher. Installation does not require loop power; however, proper grounding is essential and should be managed at the source device or I\/O module. Users can configure each channel as either active or inactive, with inactive channels being excluded from scanning and defaulting to a value of zero. Additionally, users can establish alarm limits within or beyond the specified range, ensuring flexibility in monitoring. Technical specifications include four channels (supporting 3-wire and\/or 4-wire RTDs), a nominal voltage range of 5 V, RTD types Accepted as platinum, copper, nickel, and nickel\/iron, an update rate of 210 ms, and a power consumption of 125 mA from the +5V bus.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483490028,"sku":"IC200ALG620","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_1438aaa7-0887-4826-b3d1-f7904c76767d.png?v=1762701551"},{"product_id":"ge-fanuc-ic200ndd010","title":"GE Fanuc IC200NDD010","description":"\u003cp\u003eThe IC200NDD010 is a VersaMax Nano PLC engineered by GE, designed to operate with a nominal input power of +12VDC. This compact controller features six 12VDC configurable inputs and four DC transistor outputs, supporting versatile applications. The six configurable inputs can be configured as standard or high-speed counter (HSC) inputs, accommodating various devices such as pushbuttons, limit switches, and electronic proximity switches. The four transistor outputs can function as standard outputs or be governed by high-speed counters, allowing for Pulse Train and Pulse Width Modulation (PWM) signaling. Each output circuit is capable of driving high inrush currents, up to eight times the rated current, making it suitable for switching lamps and inductive loads. The high-speed counter outputs operate at input voltages of 9V in the ON state and 2.5V in the OFF state, supporting a maximum counter frequency of 10 kHz with a duty cycle ranging from 20% to 80%. The module supports a maximum of three HSC\/PT and\/or PWM outputs, with a load voltage of 12V and pulse frequency up to 5 kHz. The transistor outputs maintain a load limit of 0.7A per circuit and 4A per common, with a maximum output voltage drop of 0.3V and off-state leakage not exceeding 0.1mA. The IC200NDD010 is ideally suited for applications where reliability and precise control are paramount.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483522796,"sku":"IC200NDD010","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_b931c1b4-d9d0-42e4-9633-ccc3d01546fc.png?v=1762701553"},{"product_id":"ge-fanuc-ic200tbm002","title":"GE Fanuc IC200TBM002","description":"\u003cp\u003eThe GE Intelligent Platforms IC200TBM002 is a component of the Versamax series, designed to enhance automation solutions in industrial environments. This versatile module supports a wide range of applications, providing robust connectivity and streamlined integration with the Versamax system architecture. Engineered for reliability and high performance, the IC200TBM002 ensures efficient data processing and communication within control systems, making it an essential asset for optimizing industrial operations.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483555564,"sku":"IC200TBM002","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_10861e30-b88d-4aab-aae8-1dc6a1c6ec03.png?v=1762701553"},{"product_id":"ge-fanuc-ic200erm001","title":"GE Fanuc IC200ERM001","description":"\u003cp\u003ePart Number: IC200ERM001  \n\u003cbr\u003eThe IC200ERM001 Isolated Expansion Receiver Module is a vital component of the GE VersaMax series, designed to enhance the capabilities of programmable logic controllers (PLCs) and I\/O stations. This module requires the use of an expansion transmitter module (ETM001) when installed in a PLC rack or I\/O station. It features LED indicators that provide real-time feedback on power status and the operational status of the expansion bus. The module has a maximum backplane consumption of 5V output and includes a 3.3V output. Equipped with two 26-pin female D-shell ports, the upper port is dedicated to receiving the cable from the expansion transmitter, while the lower port allows for daisy-chaining to the next expansion rack or connecting a terminator plug for the final rack. Power for the IC200ERM001 is sourced from the installed power supply, and if the expansion rack includes a power booster carrier, it should be connected to the same power source as the module. It is recommended to install the IC200ERM001 in the far left slot of the rack and securely attach it to the DIN rail at the left end of the expansion rack. A rotary switch, located under the access door of the module, is utilized for selecting the ID of the expansion rack. This module supports the use of all I\/O and communication modules within expansion racks. For safety, ensure that all power is turned off before removing the module from the expansion rack.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483588332,"sku":"IC200ERM001","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_98115a69-5cdc-4642-b74b-55a0c221deb2.png?v=1762701551"},{"product_id":"ge-fanuc-ic200chs002","title":"GE Fanuc IC200CHS002","description":"\u003cp\u003ePart Number: IC200CHS002\u003c\/p\u003e\n\n\u003cp\u003eThe IC200CHS002 is a Box-Style I\/O Carrier designed for use with the GE Fanuc VersaMax series controllers. This versatile carrier features 36 IEC box-style terminals and supports backplane communications, mounting, and field wiring for a single input-output module. It is capable of accommodating a maximum of 32 input-output points, along with 4 shared power connections. The IC200CHS002 includes user-friendly keying controls that ensure correct module installation, with keys designed to match the module’s keying at the base. Its integrated male\/female connectors simplify backplane connections, eliminating the need for additional cables or tools. A module latch hole secures the module to the carrier, while a transparent hinged door provides protection for the wiring terminals. Additionally, an auxiliary input-output terminal strip offers extra bussed connection points. The carrier easily attaches to a 7.5 mm x 35 mm DIN rail and requires proper grounding for effective EMC protection; a conductive corrosion-resistant finish is recommended for the rail. For applications subject to mechanical vibration and shock, panel mounting of the IC200CHS002 is advised. The terminal blocks are designed to accommodate one solid or stranded wire of AWG 14 to AWG 22, or two wires of up to AWG 18 during field wiring.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483621100,"sku":"IC200CHS002","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_570e8d03-ae90-45a2-b238-95ca0a0f2d48.png?v=1762701556"},{"product_id":"ge-fanuc-ic200chs014","title":"GE Fanuc IC200CHS014","description":"\u003cp\u003eProduct Description: The IC200CHS014 is an I\/O Interposing Box-Style Thermocouple Cold Junction Compensation device, specifically designed for the Versamax series by GE Fanuc. This unit serves as a critical interface, equipped with a connector for easy attachment to a cable from the connector-style I\/O carrier, and features 36 box-style terminals. The IC200CHS014 provides local cold junction compensation for accurate thermocouple input measurements. Additionally, it includes a clear protective hinged door that secures the wiring terminals and accommodates boards that can be folded and inserted into the door for convenient access. The IC200CHS014 can be mounted directly on the same DIN rail as the Connector-Style I\/O Carrier or on a separate DIN rail, ensuring maximum resistance to mechanical vibration and shock, which necessitates panel mounting. When installing the DIN rail, it is recommended to utilize screws spaced approximately 6 inches (15.24 cm) apart and to implement DIN-rail clamps, product code IC200ACC313, at both ends for stability. Furthermore, the DIN rail must be electrically grounded to ensure compliance with EMC protection standards.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483686636,"sku":"IC200CHS014","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_a07977e8-0759-4dde-a458-a9921763f7c5.png?v=1762701555"},{"product_id":"ge-fanuc-ic200mdl140","title":"GE Fanuc IC200MDL140","description":"\u003cp\u003eThe IC200MDL140 is a VersaMax AC Input Module designed for discrete input applications within industrial automation systems. This module features positive logic sourcing type inputs, allowing it to receive current from AC input devices and return it to the common terminal. It offers a single group of eight discrete inputs, which connect between the input and common terminals for effective control and monitoring. Power for the IC200MDL140 is supplied via the backplane, with intelligent processing managed by the CPU or Network Interface Unit (NIU). Each input point is equipped with LED indicators to display the on\/off state, as well as an OK indicator to confirm backplane power presence. Prior to installation, users should conduct a visual inspection of the module for any signs of damage, as introducing a damaged module into a CPU can lead to further complications. Additionally, users must ensure correct installation to prevent potential performance issues with other backplane modules, as hot insertion is discouraged. The 8-point module does not require derating regardless of its orientation, and it provides electrical isolation with a continuous rating of 250 VAC between user input, logic, and frame ground, and 1500 VAC for one minute. The input voltage range is 0 to 132 VAC with a nominal value of 120 VAC. It is crucial to observe safety guidelines, as this module presents an explosion hazard and should not have any components substituted.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483653868,"sku":"IC200MDL140","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_4373b225-bb87-4923-94a1-09d5c3ca7283.png?v=1762701553"},{"product_id":"ge-fanuc-ic200kit001","title":"GE Fanuc IC200KIT001","description":"\u003cp\u003eThe IC200KIT001 is a comprehensive conversion kit designed by GE Fanuc to facilitate the transition from Series 90 Micro controllers to the VersaMax Micro and VersaMax Nano product lines. This kit includes the VersaPro programming software (part number IC640VPS002), essential CAD files, and a programming cable, providing users with the necessary tools for effective migration. Additionally, the kit contains detailed manuals and supplementary resources to support a seamless conversion process, ensuring users can efficiently adapt their systems to the advanced capabilities of the VersaMax family.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483719404,"sku":"IC200KIT001","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_b6b02204-2d58-4027-be3a-6b29865e3bc8.png?v=1762701553"},{"product_id":"ge-fanuc-ic200ndr010","title":"GE Fanuc IC200NDR010","description":"\u003cp\u003ePart Number: IC200NDR010\u003c\/p\u003e\n\n\u003cp\u003eThe IC200NDR010 is a 10-Point Nano PLC from GE's VersaMax series, offering a compact and versatile solution for industrial automation. This model features six 24VDC inputs and four 2-Amp relay outputs, which are designed as normally open. The relay outputs can manage devices operating in the range of 5-30VDC or 5-250VAC, allowing for flexibility in application. The unit is powered by a nominal +12VDC input, ensuring reliable operation in diverse environments. The six configurable DC inputs can be set to either negative or positive logic, supporting both standard use and high-speed counter applications. When utilized in standard mode, the inputs are compatible with a variety of devices, including pushbuttons, limit switches, and electric proximity switches, with a rated voltage of 12 volts DC and an input range of 0 to 15 volts DC. The relay outputs are Form A (single pole single throw), suitable for controlling devices such as motor starters, solenoids, and indicators, with the internal +24VDC supply providing power to the relay coils. For complete functionality, external AC or DC power sources are required to operate field devices. The output connections for both standard and high-speed outputs are identical, enhancing ease of installation and maintenance.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483752172,"sku":"IC200NDR010","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_95b0f8e7-3457-4b96-805d-c742e8566279.png?v=1762701554"},{"product_id":"ge-fanuc-ic200mdl743","title":"GE Fanuc IC200MDL743","description":"\u003cp\u003ePart Number: IC200MDL743\u003c\/p\u003e\n\n\u003cp\u003eThe IC200MDL743 is a discrete signal output module from the GE Fanuc VersaMax series, featuring 16 output points capable of either negative logic or sinking operation. This module facilitates load switching to the negative side of a DC power source, allowing it to receive current from connected electrical loads. An external power source is necessary to support all load switching activities. The module operates in two distinct modes, each with specific voltage requirements: in standard 12\/24 VDC mode, the output voltage ranges from 10.2 to 30 volts, with nominal values at 12 and 24 volts, while in 5VDC-TTL mode, it operates from 4.75 to 5.25 volts, with a nominal value of 5 volts. Each output point supports up to 0.5 amperes in 12\/24 VDC mode and 25 milliamps in 5VDC-TTL mode. At a maximum output of 30 volts, the leakage current is 0.5 milliamps. The response times for switching on and off are capped at 0.2 milliseconds and 1.0 millisecond, respectively. It is important to note that the IC200MDL743 does not support thermal derating, nor does it offer channel isolation or internal protection features such as fuses. All discrete output processing is managed by the associated central processing unit (CPU) or network interface unit (NIU). The module dimensions are 4.3 inches in width, 2.63 inches in height, and 1.956 inches in depth. Carrier height and mating connectors are excluded from these measurements.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483784940,"sku":"IC200MDL743","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_7da52adb-65c5-4694-ab51-262416f4ba45.png?v=1762701552"},{"product_id":"ge-fanuc-ic200dbi001","title":"GE Fanuc IC200DBI001","description":"\u003cp\u003ePart Number: IC200DBI001\u003c\/p\u003e\n\n\u003cp\u003eThe GE Fanuc IC200DBI001 is a robust remote input\/output (I\/O) DeviceNet Network Interface Unit (NIU) designed to facilitate seamless communication in industrial automation systems. This DeviceNet slave module supports multiple communication architectures, including multi-master, peer-to-peer, and master\/slave configurations with broadcasting capabilities, enabling up to 64 nodes to connect without the requirement for routing or bridging. The IC200DBI001 serves as a controller for the I\/O station of VersaMax modules, operating I\/O modules with their default-set characteristics. It accommodates various module types to meet application-specific requirements and is powered directly by an integrated power supply. For applications requiring additional current, supplementary \"booster\" power supplies can be incorporated.\u003c\/p\u003e\n\n\u003cp\u003eThe NIU manages up to 8 I\/O modules per station, processing a total of 128 bytes for both input and output data. It supports Group 2 Only Server functionality and offers two I\/O types: Change-Of-State and Polling. The module's data rate is configurable via rotary switches, with options of 125K, 250K, or 500K. Power consumption is rated at 160mA at 5V and 10mA at 3.3V, and a power LED indicator provides clear status updates. Installation is straightforward; simply snap the NIU onto a DIN rail, secure the power supply, and connect the communication bus. The module is equipped with various LED indicators that reflect operational status: the green PWR light indicates power presence, the green OK light confirms functional operation, and an amber FAULT light signals any detected errors. Additionally, the MOD light offers diagnostic feedback regarding configuration and operational status, while the NET light communicates network connectivity. The FORCE indicator, which is always off, indicates forced I\/O values. The IC200DBI001 is an essential component for reliable DeviceNet network interfaces in industrial applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483817708,"sku":"IC200DBI001","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_0cc65e51-b8ea-4ecd-8e97-ad473525f366.png?v=1762701552"},{"product_id":"ge-fanuc-ic200alg264","title":"GE Fanuc IC200ALG264","description":"\u003cp\u003ePart Number: IC200ALG264\u003c\/p\u003e\n\n\u003cp\u003eThe IC200ALG264 is a 15-channel, 15-bit current analog input module designed for the GE Fanuc Versamax Series. This module interfaces with 15 single-ended current inputs, powered directly by the backplane power supply, and operates continuously at 250 VAC without the need for an external power source. However, user transceivers will require an external power supply. The IC200ALG264 features jumper selections that allow for configuration between (4-20)mA and (0-20)mA input ranges, with a high-resolution 15-bit analog-to-digital converter. The module includes software configurability and an option to retain the last input state during power loss. Additionally, it provides diagnostic capabilities such as internal power loss detection for field circuits and open wire error reporting in 4-20mA mode. A green LED indicator confirms the presence of backplane power and proper operation of internally generated field power. To optimize signal integrity, shielded twisted pair cables are recommended for analog channel connections. Grounding should be performed at the source device; if not feasible, the cable shield must be grounded at the I\/O module using an Auxiliary I\/O Terminal. The module consumes 100 mA from the +5V bus and has an input filter response of 24 Hz ±20%.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483850476,"sku":"IC200ALG264","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_2fcd9119-d886-4b6f-81f0-b2da88a1115d.png?v=1762701553"},{"product_id":"ge-fanuc-ic200pbi001","title":"GE Fanuc IC200PBI001","description":"\u003cp\u003eThe IC200PBI001 is a Profibus-DP Network Interface Unit (NIU) specifically designed for use with the GE Fanuc VersaMax Series. Operating as a slave device within a Profibus-DP network, this module efficiently manages a network of I\/O modules and connects to a power supply installed directly onto the NIU. The IC200PBI001 supports network addresses ranging from 1 to 125 and features an auto-detecting data rate from 9.6 Kbaud to 12 Mbaud. It can handle a maximum of 375 bytes of I\/O data, with the capacity for up to 244 bytes of inputs or outputs, thereby allowing control of 64 I\/O modules per unit. This unit is equipped with five LED indicators that provide real-time monitoring of the power and operational status of the NIU. The PWR LED denotes power status in green when active, while the OK LED indicates functional firmware also in green. An amber FAULT LED signals detection of an internal fault or issue with an I\/O module. The NETWORK LED's color varies: green indicates successful data transfer, amber shows a configuration rejection by the master device, and off signifies a lack of communication with the master. The FORCE LED illuminates to indicate any active forced I\/O values. Notably, the IC200PBI001 is compatible with all VersaMax High-Density Analog Modules, enhancing its utility in advanced industrial applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483883244,"sku":"IC200PBI001","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_79e6cd4b-b2ed-476f-b922-1d221eab9baa.png?v=1762701555"},{"product_id":"ge-fanuc-ic200mdl730","title":"GE Fanuc IC200MDL730","description":"\u003cp\u003ePart Number: IC200MDL730  \n\u003cbr\u003eThe IC200MDL730 is a discrete output module from GE Automation and Controls, part of the VersaMax series. This module features a single group of eight output points that function as positive logic or sourcing types, enabling efficient switching of loads to the positive side of the power supply. To facilitate load switching, the IC200MDL730 requires an external direct current power source in addition to the standard backplane power supply. It is essential that the backplane power source remains stable for at least one second prior to applying field power; otherwise, a false output point fault may occur. This module includes built-in fault detection diagnostics that can identify overloads or short circuits, with each output point protected by Electronic Short Circuit Protection (ESCP) and overcurrent protection. However, it is important to note that channel-to-channel isolation is not supported. The output points can handle up to 2 amperes of current at 30 volts direct current, with the module collectively capable of driving a maximum load of 8 amperes. Current consumption from the 5-volt backplane is 50 milliamps, while the output voltage range spans from 17.5 to 30 volts direct current, with a nominal output voltage of 24 volts and an acceptable maximum output voltage drop of 0.5 volts. For specific requirements regarding external power supply, please refer to the product documentation.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483916012,"sku":"IC200MDL730","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_ec2aaf76-7636-46ee-ac5d-31c2900f3a01.png?v=1762701553"},{"product_id":"ge-fanuc-ic200bem103","title":"GE Fanuc IC200BEM103","description":"\u003cp\u003ePart Number: IC200BEM103 is a DeviceNet Master Module designed for use within the GE Fanuc Versamax Series of PLC products. This network communications module enables seamless interfacing between the Versamax PLC CPU and a DeviceNet network, provided the appropriate configuration is applied. The installation process is straightforward; the communications carrier should first be mounted on an unpainted DIN Rail to ensure optimal grounding. Align the module with the communications connector, ensuring the latch is in the unlocked position, and press down until both tabs audibly click, then secure the latch into the locked position. The module's front features a connector for linking to the communications bus, and users can remove the connector cover if additional module installation is required prior to system activation. Upon power-up, the IC200BEM103 features indicator LEDs that verify operational status. It is vital to adhere to safety guidelines when installing this module in hazardous locations. For configuring the DeviceNet Network Control module, two steps are necessary: integrating the module into the PLC configuration through configuration software, and utilizing programming software to execute a COMMREQ for network addressing and data length specifications. The IC200BEM103 supports up to 128 bytes of input and output data, operates at network data rates of either 125 Kbaud, 250 Kbaud, or 500 Kbaud, and consumes 490 mA from a 5V output.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483948780,"sku":"IC200BEM103","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_49936c94-eb20-4090-b98e-864abf718d04.png?v=1762701554"},{"product_id":"ge-fanuc-ic200pwr201","title":"GE Fanuc IC200PWR201","description":"\u003cp\u003ePart Number: IC200PWR201 \u003c\/p\u003e\n\n\u003cp\u003eThe IC200PWR201 power supply module, manufactured by GE Fanuc as part of the VersaMax family, is designed to supply electrical power to essential backplane components, including network interface units (NIU), central processing units (CPU), and input\/output (I\/O) modules. This module serves primarily as the main power source for backplane systems; however, it can also be integrated into a booster carrier to function as a secondary power source in larger applications. The IC200PWR201 operates with a nominal direct current input voltage of 12 volts and accommodates input voltage ranges from 9.6 volts to 15 volts, with an input power of 11 watts. It features a holdup time of 10 milliseconds, which indicates its ability to maintain output levels during brief input power interruptions. The module supports output voltages of both 3.3 volts and 5 volts, allowing for flexible application configurations. The maximum output current is limited to 1.5 amperes, and if the 3.3-volt output is utilized, this will reduce the available current for the 5-volt output accordingly, as the two outputs are shared. Inrush current can reach up to 25 or 30 amperes, depending on the selected input voltage. The IC200PWR201 is equipped with robust protection features, including overload safeguards, reverse polarity protection, and electronic short circuit protection, ensuring reliable performance in various operational environments.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964483981548,"sku":"IC200PWR201","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_42b3f4cc-c78c-4f55-b4df-7112609c7fa5.png?v=1762701553"},{"product_id":"ge-fanuc-ic200nal211","title":"GE Fanuc IC200NAL211","description":"\u003cp\u003ePart Number: IC200NAL211  \u003c\/p\u003e\n\n\u003cp\u003eThe IC200NAL211 is a Nano PLC within GE's VersaMax series, featuring a compact design that facilitates versatile control applications. This controller includes 10 discrete points, consisting of six configurable DC inputs and four normally open relay outputs rated at 2 Amps, suitable for controlling devices operating within 30VDC or 5 to 250VAC. The PLC operates on a nominal input voltage of +24VDC. Each of the six DC inputs can be configured for either positive or negative logic, accommodating a variety of standard input devices including pushbuttons, limit switches, and electronic proximity switches. However, Input lN1 is dedicated as the sole analog input, supporting analog signals in the range of 0V to 10V and is not software-calibratable. The relay outputs are ideal for managing motor starters, solenoids, and indicators, powered by an internal 24VDC supply. While these relay outputs can also function as high-speed counter outputs (up to three), they do not support pulse train or pulse-width modulation outputs. All connections and specifications for high-speed counter outputs and standard relay outputs remain consistent, ensuring ease of integration into existing systems.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964484047084,"sku":"IC200NAL211","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_bb4c3f03-5d40-4e1b-9d0f-0f7f994b56dc.png?v=1762701554"},{"product_id":"ge-fanuc-ic200chs102","title":"GE Fanuc IC200CHS102","description":"\u003cp\u003eThe IC200CHS102 is an I\/O Interposing Disconnect Style expansion base featuring 16 points, designed by GE Automation and Controls as part of the VersaMax series. This expansion base facilitates the connection of field wiring to various connector-style carriers within the VersaMax series and offers integrated disconnect functionality for all field devices connected to the I\/O module. Each field device can be individually disconnected using either the signal or return knife switch, enabling maintenance without impacting the entire system. It is compatible with a range of discrete modules, excluding the MDL144, MDL244, MDL331, MDL730, MDD840, MDD843, and MDD850. The IC200CHS102 utilizes a box-style termination for wiring, with a non-integrated field termination, and does not support removable terminal connectors. Dimensions for the unit are 2.6 inches (65 mm) deep, 4.5 inches (115 mm) wide, and 4.95 inches (126 mm) tall, with a total weight of approximately two pounds (0.9 kg), exclusive of DIN rail height. The device features J1 and J2 connection ports and supports a total of 36 box-style terminals for field wiring and power connections. This product requires the IC200CHS101 main base for operation and should not be directly connected to the IC200CHS003 base. To establish a connection with the IC200CHS101, simply attach the included ribbon cable from the J2 port of the IC200CHS102 to the expansion port on the main base.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964484014316,"sku":"IC200CHS102","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_1177407a-b563-4fe1-a4fb-b35a633859c8.png?v=1762701556"},{"product_id":"ge-fanuc-ic200alg262","title":"GE Fanuc IC200ALG262","description":"\u003cp\u003eThe IC200ALG262, a 15-bit differential current module from GE Fanuc's Versamax series, is designed to facilitate the integration of eight analog current inputs without requiring an external power source, as it draws power directly from the backplane supply. This module features a single group of eight differential input channels, delivering eight words of analog input data, with the intelligent processing handled by the CPU or Network Interface Unit (NIU). It supports both 4-20 mA and 0-20 mA input ranges, configurable via a jumper on the carrier terminal; an absence of the jumper defaults to the 4-20 mA range. The IC200ALG262 also includes critical diagnostic features, reporting loss of power faults for field-side circuits and open wire faults in the 4-20 mA mode. LED indicators provide visual confirmation of power status and operational integrity. For optimal performance, analog channel connections should be established using shielded twisted-pair cable, with grounding ideally at the source device or at the I\/O module if necessary. This unit operates with a voltage range of -10 to +10 volts DC, ensuring a comprehensive response for various application requirements. With a power consumption of 200 mA from the +5V bus and an update rate of 7.5 ms, the IC200ALG262 is a reliable choice for precision analog input applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964484079852,"sku":"IC200ALG262","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_f5360c1f-ecca-4b78-9160-ad7a6831208f.png?v=1762701555"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/collections\/GE_Fanuc_Collection_Group_Photo_5505538e-645a-4b6b-baaa-3caa09c98028.png?v=1762768573","url":"https:\/\/www.industrialautomationco.com\/collections\/ge-fanuc-emerson-versamax.oembed?page=7","provider":"Industrial Automation Co.","version":"1.0","type":"link"}