{"title":"GE Fanuc Emerson | RX3i PacSystem","description":"\u003cp\u003eThe RX3i PACSystem is Emerson’s evolutionary upgrade from the 90‑30 line. It retains backward compatibility with existing 90‑30 I\/O and racks but adds PCI‑based backplanes and a family of high‑speed CPUs with embedded Ethernet. This makes migration straightforward, yet the platform still straddles two backplane technologies and requires GE’s Proficy software. It’s a practical interim step for sites with installed 90‑30 hardware, but new installations might skip the half‑measures and adopt fully integrated PAC architectures that don’t carry the baggage of two decades of design decisions.\u003c\/p\u003e","products":[{"product_id":"ge-fanuc-ic695pnc001","title":"GE FANUC IC695PNC001","description":"\u003cp\u003eThe IC695PNC001 is a PROFINET Controller Module from the GE Fanuc PACSystems RX3i Series, designed to facilitate high-speed connectivity between a PACSystems RX3i controller and a PROFINET local area network. This module features a single slot configuration, offering efficient integration within the RX3i architecture. It supports the Universal backplane and operates with PROFINET protocol version 2.2. Additionally, the IC695PNC001 is equipped with general Class A communication ports, including a Micro USB port designated for system setup and diagnostics. The module draws internal power of 0.5A at 3.3 VDC and 1.5A at 5 VDC, ensuring reliable performance for demanding applications. For detailed specifications, please refer to the IC695PNC001 webpage.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"New","offer_id":47398268600556,"sku":"IC695PNC001-FS","price":1990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/ge-fanuc-ic695pnc001-new-industrial-automation-control-607.jpg?v=1781008838"},{"product_id":"ge-fanuc-ic695ecm850","title":"GE Fanuc IC695ECM850","description":"\u003cp\u003eThe IC695ECM850 is an Ethernet Communication Module designed for integration with the GE Fanuc RX3i Series, enabling seamless connectivity to IEC 61850 networks. This module facilitates communication between an RX3i controller and an IEC 61850 network infrastructure. The device features a universal backplane support and is equipped with a set of status LEDs for operational monitoring, including indicators for OK, LAN, STATUS, CONNECTION, ACTIVE, USB, and four PRT connections. The module supports a single Ethernet IP address and includes two RJ-45 ports as well as two SFP (Small Form-factor Pluggable) cages for flexible network interfacing. Additionally, the IC695ECM850 is fitted with a micro USB port to facilitate communications. For detailed technical specifications, please refer to the product webpage.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964494532844,"sku":"IC695ECM850","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_db89bfc3-bc8c-42fa-947b-4e1a3bf49abe.png?v=1762701585"},{"product_id":"ge-fanuc-ic695acc402","title":"GE Fanuc IC695ACC402","description":"\u003cp\u003eThe GE Fanuc IC695ACC402 is an Energy PAC designed for the RX3i CPU model IC695CPE330. This module offers reliable RAM memory backup, ensuring data retention for approximately five years. Its robust functionality is essential for maintaining system integrity during power interruptions, making it an ideal solution for applications that require long-term reliability in memory preservation.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964494565612,"sku":"IC695ACC402","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_076ccf88-9b83-4d50-9681-f9e8e3836f58.png?v=1762701585"},{"product_id":"ge-fanuc-ic695gcg001","title":"GE FANUC IC695GCG001","description":"\u003cp\u003eThe IC695GCG001 is a versatile and robust controller designed to enhance automation and control capabilities in industrial settings. This component is part of GE Fanuc's extensive line of programmable logic controllers, recognized for their reliability and efficiency. The IC695GCG001 supports a wide range of applications, delivering superior performance through its advanced processing capabilities. Engineered for seamless integration within existing control systems, this controller facilitates enhanced communication and data management. With its compact design, it is suitable for both space-constrained environments and expansive industrial setups, providing flexibility and scalability to meet diverse operational requirements.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"New","offer_id":47236857200876,"sku":"IC695GCG001-FS","price":1990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/ge-fanuc-ic695gcg001-new-industrial-automation-control-973.jpg?v=1781008831"},{"product_id":"ge-fanuc-ic694tbb032","title":"GE Fanuc IC694TBB032","description":"\u003cp\u003eThe IC694TBB032 is a 36-pin box-style terminal block designed for use within the GE Fanuc RX3i Series. This terminal block provides reliable connectivity and easy integration in various industrial automation applications. For detailed specifications and additional information, please refer to the product page for IC694TBB032.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964494729452,"sku":"IC694TBB032","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_5833113e-e29a-4339-9c84-fdf5a28528ba.png?v=1762701585"},{"product_id":"ge-fanuc-ic695eis001","title":"GE Fanuc IC695EIS001","description":"\u003cp\u003ePart Number: IC695EIS001\u003c\/p\u003e\n\n\u003cp\u003eThe IC695EIS001 is an Ethernet IEC 60870-5-104 Server Module designed for the GE Fanuc RX3i Series, facilitating robust communications according to the IEC protocol standards. This module features dual RJ-45 Ethernet ports, supporting both 10BaseT and 100BaseTX speeds, as well as a single RS-232 DCE serial port for flexible connectivity options. It is equipped with LEDs for status indication, including ETHERNET OK, LAN OK, and LOG EMPTY. The device supports a universal backplane and can accommodate one unique IP address, enhancing network integration and performance. For detailed specifications, please refer to the dedicated webpage for the IC695EIS001.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964494794988,"sku":"IC695EIS001","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_818120c1-b14b-40a7-952d-0ebc73dddcba.png?v=1762701586"},{"product_id":"ge-fanuc-ic695rmx228","title":"GE Fanuc IC695RMX228","description":"\u003cp\u003eThe IC695RMX228 is a Redundancy Memory Xchange module designed for use with the GE Fanuc RX3i Series. This module type is engineered for reflective memory applications and occupies a single slot within the system architecture. The IC695RMX228 features a robust capacity of 128 megabytes for reflective memory, ensuring efficient data exchange in redundant configurations. It operates without the need for specific communication protocols and has internal power requirements of 580 mA at 3.3 VDC and 220 mA at 5 VDC. For detailed specifications and additional information, please refer to the product page for the IC695RMX228.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964494827756,"sku":"IC695RMX228","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_ee7f2486-35d3-45c8-b4b5-c42bbd99eafd.png?v=1762701585"},{"product_id":"ge-fanuc-ic695cmu310","title":"GE Fanuc IC695CMU310","description":"\u003cp\u003eThe IC695CMU310 is a Max-ON Hot-Standby Redundancy CPU module designed for the GE Fanuc RX3i Series, offering robust Hot-Standby CPU redundancy across two RX3i systems to enhance reliability and uptime. This module is a single-slot central processing unit that integrates seamlessly with a universal backplane. It supports various communication protocols, including Modbus RTU Slave, SNP, and Serial I\/O, facilitating versatile connectivity options. The module features two isolated communication ports, providing both RS-232 and RS-485 interfaces. It requires an internal power supply of 1.0A at +5 VDC and 1.25A at +3.3 VDC, ensuring efficient operation within the system. For detailed specifications and further information, please visit the IC695CMU310 product page.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964494860524,"sku":"IC695CMU310","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_982c56cd-08cf-42be-ac84-cbaad183a392.png?v=1762701587"},{"product_id":"ge-fanuc-ic694alg223","title":"GE Fanuc IC694ALG223","description":"\u003cp\u003eThe IC694ALG223 is an Analog Current Input Module designed for integration within GE Fanuc's RX3i PACSystems. This module features 16 channels of single-ended inputs, which can be configured through the provided software to operate within three distinct input ranges: 4 to 20 mA, 0 to 20 mA, or an enhanced 4 to 20 mA range. Each input channel allows for high and low alarm limits, making it ideal for monitoring critical parameters. Notably, in the enhanced mode, the module can detect current levels as low as 0 mA, facilitating open-wire fault detection for 4 to 20 mA signals.\u003c\/p\u003e\n\n\u003cp\u003eEngineered to communicate with the CPU, the IC694ALG223 can relay module status and external power conditions through designated program reference addresses. It draws 120 mA from the 5 VDC bus on the PLC backplane and requires an additional 65 mA plus the loop current from a user-supplied 24 VDC power source. The onboard MODULE OK LED provides real-time status updates during power-up, indicating operational readiness, power issues, or configuration problems based on its state. The User Supply LED confirms the integrity of the external 24 VDC supply.\u003c\/p\u003e\n\n\u003cp\u003eConfigurable parameters for the IC694ALG223 include active channel selection, input data reference addresses, input length and range settings, alarm thresholds, and I\/O scan settings. This module operates effectively within an ambient temperature range of 32 to 140 degrees Fahrenheit, supporting up to a maximum input circuit current of 65 mA. The input filter response is optimized at 200 Hz, ensuring high-performance signal processing. \u003c\/p\u003e\n\n\u003cp\u003eOverall, the IC694ALG223 represents a versatile and robust solution for industrial automation applications requiring precise analog current input capabilities.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964494893292,"sku":"IC694ALG223","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_62281d44-a940-414b-90bb-43bccd8be515.png?v=1762701585"},{"product_id":"ge-fanuc-ic694tbs032","title":"GE Fanuc IC694TBS032","description":"\u003cp\u003eThe IC694TBS032 is a 36-pin, spring-style terminal block designed for use within the GE Fanuc RX3i Series. This terminal block facilitates secure and efficient wiring connections for various industrial automation applications, ensuring reliable performance and ease of installation. For detailed specifications and additional information, please refer to the product page for the IC694TBS032.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964494926060,"sku":"IC694TBS032","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_0fa1ee81-2804-4412-a11b-6e0ec6882e53.png?v=1762701586"},{"product_id":"ge-fanuc-ic694alg542","title":"GE Fanuc IC694ALG542","description":"\u003cp\u003ePart Number: IC694ALG542\u003c\/p\u003e\n\n\u003cp\u003eThe IC694ALG542 Analog Current\/Voltage Module is designed by GE Fanuc for the PACSystems RX3i platform, providing advanced diagnostics and mixed I\/O functionality with four differential input channels and two single-ended output channels. Each channel can be configured using Machine Edition software for multiple voltage and current ranges, including unipolar (0 to +10 volts), bipolar (-10 to +10 volts), and current ranges of 0 to 20 mA or 4 to 20 mA. The input channels can also operate in an enhanced mode capable of 4-20 mA. Output channels feature options for either maintaining the last state or reverting to the low end of the power range in the event of a power interruption. Additionally, these outputs can operate in ramp mode, allowing the output value to transition gradually over time as commanded by the application program. Parameters such as high and low limits can be set for each channel, and open wire faults are reported to the CPU for individual outputs. The module includes features for open circuit detection, configurable scaling, offsets per channel, and alarm detection and reporting, along with comprehensive fault reporting capabilities supported by full diagnostic point fault contacts within the logic program. Firmware upgrades are supported. For installation, the IC694ALG542 requires 150 mA plus loop current from an external 24V DC source, and it supports insertion and removal from an RX3i universal backplane. The module operates with an update rate of 2ms. It occupies a single slot and has a power consumption of 95 mA at 5V and 150 mA at 24V DC external.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964494958828,"sku":"IC694ALG542","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_6396ce46-7ba1-43f5-be02-8e2141d824e8.png?v=1762701584"},{"product_id":"ge-fanuc-ic694mdl655","title":"GE Fanuc IC694MDL655","description":"\u003cp\u003eThe IC694MDL655 is a 32-point, 24 VDC input module designed for use with the GE Fanuc RX3i Series. This module accommodates 32 discrete input points, organized into four isolated groups of eight, and supports both positive and negative logic inputs with operating voltage levels of up to 30V. The device requires an input current of 7 mA and has a voltage input range from 0 to +30 VDC, ensuring versatility in various applications. Power consumption is specified at 195 mA from the 5V bus and 224 mA from a 24V supply. For detailed specifications and additional information, please visit the IC694MDL655 product page.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964494991596,"sku":"IC694MDL655","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_30c4bfd6-ae17-46da-8dc3-28431406faff.png?v=1762701588"},{"product_id":"ge-fanuc-ic694mdl930","title":"GE Fanuc IC694MDL930","description":"\u003cp\u003eThe IC694MDL930 is an 8-point, isolated relay output module from the GE Fanuc RX3i Series, designed for versatile control of output loads. Each of the eight normally-open relay circuits is capable of handling up to 4 Amps of output current, coming with a switching current of 4.0 Amps per point. This module operates within a voltage range of 5 to 30 Volts DC and 5 to 250 Volts AC, supporting both AC and DC applications with a frequency of 50\/60 Hz for AC outputs. The module features point-to-point isolation for enhanced electrical safety and consists of an overall power consumption of 6 mA from the 5V backplane and 70 mA from the relays at 24V. The module's inrush rating is 5 Amps, making it suitable for demanding applications in industrial environments. The IC694MDL930 integrates seamlessly into GE Fanuc's PACSystems, ensuring reliable performance and ease of use in diverse automation tasks. For complete specifications, please refer to the IC694MDL930 product page.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495024364,"sku":"IC694MDL930","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_ff68b1ca-f6ba-4883-b0b7-431c846f92b9.png?v=1762701584"},{"product_id":"ge-fanuc-ic694alg390","title":"GE Fanuc IC694ALG390","description":"\u003cp\u003ePart Number: IC694ALG390\u003c\/p\u003e\n\n\u003cp\u003eThe IC694ALG390, manufactured by GE Fanuc, is a robust 2-channel analog module designed for use with the Rx3i PacSystem. This module provides two output channels capable of converting digital data into analog signals, refreshing at an approximate update rate of 5 milliseconds. In the event of a CPU reset or entry into stop mode, the outputs can be configured to either revert to a default state or hold the last state. The operational voltage range of the IC694ALG390 spans from -10 to +10 volts, while external voltage requirements range from 18VDC to 30VDC with a permissible ripple of up to 10%. The module’s installation location dictates its power sourcing: when placed in an RX3i Universal Backplane, an external source of isolated +24 VDC is required for operation. In contrast, if positioned within an Expansion Backplane, it can utilize either the isolated +24 VDC from the backplane itself or an externally connected isolated +24 VDC supply. Notably, if the external supply is between 27.5-30 VDC, it will take precedence and supply the load requirements over the isolated 24 VDC system. For optimal performance and to ensure hold last state functionality during backplane power loss, an external power source is advisable. It is recommended that field connections be made using high-quality twisted, shielded instrumentation cable to reduce capacitive loading and electromagnetic interference, with shields grounded at the user terminal connector block. The IC694ALG390 has a maximum output load of 5 mA, a power consumption of 32 mA at +5VDC, and 120 mA at +24VDC, and features factory calibration up to 2.5 mV per count.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495057132,"sku":"IC694ALG390","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_9048625b-cbaf-4511-bbd6-e2878ea20c96.png?v=1762701586"},{"product_id":"ge-fanuc-ic695cep001","title":"GE Fanuc IC695CEP001","description":"\u003cp\u003ePart Number: IC695CEP001\u003c\/p\u003e\n\n\u003cp\u003eThe IC695CEP001 is a Carrier Ethernet Protocol (CEP) module from the GE Fanuc RX3i Series, designed to facilitate the connection of a remote node to a PACSystems RX3i I\/O module within a PROFINET I\/O Local Area Network (LAN). This module operates as an I\/O link interface, ensuring efficient data transfer and communication. It features dual Ethernet ports with RJ-45 connectors for network connectivity, as well as a USB port intended exclusively for firmware upgrades. The IC695CEP001 offers robust I\/O capabilities, supporting 512 bytes of input and 512 bytes of output data. To simplify diagnostics and monitoring, it includes several status indicators: PWR1, PWR2, OK, Connect, PRT1, and PRT2. This module can be easily mounted on a DIN rail or panel, making it versatile for various installation environments. For detailed specifications, please refer to the IC695CEP001 product webpage.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495089900,"sku":"IC695CEP001","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_7c3771a1-e394-495a-8d2c-6208f5d8227f.png?v=1762701584"},{"product_id":"ge-fanuc-ic695psa140","title":"GE Fanuc IC695PSA140","description":"\u003cp\u003eThe IC695PSA140 is a versatile power supply module from the GE Fanuc RX3i PACSystems series, designed to deliver reliable performance in industrial automation applications. This multi-purpose unit operates with a nominal rated voltage of 120\/240 volts AC or 125 volts DC, accommodating a broad range of power needs. The power supply provides a maximum output power of 40 watts, with an input power capacity of 70 watts. Featuring output voltages of 24V DC, 5.1V DC, and 3.3V DC, it efficiently supports various connected devices. The module also boasts a continuous input-to-backplane isolation rating of 250V AC, ensuring safety and reliability in operation. Each terminal can handle up to 6 amps, making this power supply suitable for diverse industrial applications. The IC695PSA140 is an ideal choice for those requiring a robust and flexible power solution within the GE Fanuc control systems. For detailed specifications and additional information, please refer to the product's dedicated web page.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495122668,"sku":"IC695PSA140","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_89859f0f-59db-42c8-92ec-3636528de234.png?v=1762701586"},{"product_id":"ge-fanuc-ic695chs016","title":"GE Fanuc IC695CHS016","description":"\u003cp\u003eThe IC695CHS016 is a 16-slot Universal Backplane designed as part of the GE Fanuc RX3i Series. This versatile backplane accommodates both PCI-based (IC695) and high-speed serial (IC694) I\/O and option modules, utilizing a dual-bus architecture for optimized performance. The backplane is designed with dimensions of 5.6 inches in height, 23.7 inches in width, and 5.8 inches in depth, and requires a clearance of 4 inches on all sides for adequate ventilation and access. It operates at an internal power consumption of 240 milliamps at 5 Volts DC and 600 milliamps at 3.3 Volts DC. With an enclosure rating of IP 20 and NEMA\/UL Type 1 certification, the IC695CHS016 is suitable for various industrial environments. A grounding bar is also supported to ensure electrical stability. For further specifications and operational details, please refer to the dedicated product webpage.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495155436,"sku":"IC695CHS016","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_20f13364-e962-4f62-b1c6-7cd1b87e9169.png?v=1762701586"},{"product_id":"ge-fanuc-ic694mdl250","title":"GE Fanuc IC694MDL250","description":"\u003cp\u003eThe IC694MDL250 is a 120 VAC 16-Point Isolated Input Module by GE Fanuc, designed to deliver reliable performance in industrial automation applications. This module features 16 isolated input points that can operate on different phases of the AC supply or be powered from a single supply, accommodating various installation configurations. An integrated RC snubber safeguards the inputs against transient electrical noise, enhancing signal integrity. The input filtering time can be dynamically adjusted through the application program, eliminating the need for DIP switch settings. Compatible with multiple terminal block styles—including box-style (IC694TBB032), extended box-style (IC694TBB132), spring-style (IC694TBS032), and extended spring-style (IC694TBS132)—this module facilitates user-friendly connections to AC devices, although terminal blocks must be ordered separately. Individual LEDs display the ON\/OFF status of each input point, with a green TB LED indicating proper locking of the terminal block and a red LED signaling if it is not secured. Safety is also prioritized, as indicated by the red bands on the door card warning users of high-voltage conditions. The IC694MDL250 can be installed in any I\/O slot within the RX3i system, but it requires RX3i CPU release 3.50 or higher for operation; it is not compatible with Series 90-30 PLC CPUs. For optimal use, input filtering settings can be enabled in the software configuration, with a recommended Digital Filter Settings Length of 16. Configuring a Digital Filter Settings Length of 0 will disable input filtering. This module has a rated voltage of 120 volts AC, supports input frequencies of 50\/60 Hz, with an input current of 7 mA at rated voltage, an input voltage range of 0 to 132 VAC, and consumes power at 220 mA from the 5V bus.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495188204,"sku":"IC694MDL250","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_883a16f4-8d32-4379-b291-7abb6c870ae7.png?v=1762701587"},{"product_id":"ge-fanuc-ic695acc412","title":"GE Fanuc IC695ACC412","description":"\u003cp\u003eThe IC695ACC412 is a replacement cap pack designed specifically for the GE Fanuc RX3i control systems, compatible with models IC695CPK330 and IC695CPE330. This component ensures reliable performance and maintains the integrity of the control system by providing essential protection and stability. Its robust design is tailored to meet the rigorous demands of industrial automation applications, ensuring seamless integration and operation within the GE Fanuc RX3i architecture.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495253740,"sku":"IC695ACC412","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_4ac9ce92-56de-4193-bc0a-12fd889ae5fa.png?v=1762701590"},{"product_id":"ge-fanuc-ic694chs392","title":"GE Fanuc IC694CHS392","description":"\u003cp\u003eThe IC694CHS392 is a Standard I\/O Backplane designed for the RX3i PacSystem family of controllers, developed by GE Fanuc. This robust backplane supports up to 10 input and output slots, providing a flexible solution for industrial automation needs. The leftmost slot must be occupied by one of the compatible serial power supplies: IC694PWR331, IC694PWR330, or IC694PWR321. It is essential to set the DIP selection switch before installing any modules; however, please note that hot installation and removal of modules is not permitted on this backplane. Additionally, the right end of the backplane features a bus connector for attaching optional expansion cables, while ensuring that the cable length does not exceed 15 meters (50 feet). The backplane's dimensions are 5.12 inches in height, 17.44 inches in width, and 5.59 inches in depth. It operates at 5VDC with a current rating of 150mA, making it a reliable choice for high-speed serial communication applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495220972,"sku":"IC694CHS392","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_64de99cb-ed7d-44fe-9e4d-35268228d285.png?v=1762701585"},{"product_id":"ge-fanuc-ic695alg112","title":"GE Fanuc IC695ALG112","description":"\u003cp\u003eThe IC695ALG112 is a 12-channel isolated analog input module designed for use with GE Fanuc's RX3i PACSystems. This module features 12 isolated input channels, enabling precise data acquisition in industrial applications. It must be installed in an RX3i Universal Backplane and is compatible with RX3i CPU firmware version 5.0 or later. The module operates within a voltage range of 0 to 10V, ±10V, 0 to 5V, ±5V, and 1 to 5V, and supports current inputs of 0-20 mA, 4-20 mA, and ±20 mA. It requires an internal power supply of 600 mA at 3.3V and 800 mA at 5V and occupies a single slot in the backplane. Configuration is facilitated through compatible software, with no jumpers required for installation. For detailed specifications and information, please refer to the dedicated webpage for the IC695ALG112.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495286508,"sku":"IC695ALG112","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_c34e2d9c-3085-473a-a008-3ec8dca9d232.png?v=1762701587"},{"product_id":"ge-fanuc-ic695alg106","title":"GE Fanuc IC695ALG106","description":"\u003cp\u003eThe IC695ALG106 is a 6-channel isolated analog input module from the GE Fanuc RX3i Series, specifically designed to enhance system flexibility and reliability in industrial automation applications. This module offers six isolated input channels, ensuring protection from potential electrical interference. It is required to be installed in an RX3i Universal Backplane and is compatible with RX3i CPU firmware version 5.0 or later. The IC695ALG106 draws internal power of 600 mA at 3.3V and 400 mA at 5V, occupying a single slot in the backplane. It accommodates a versatile voltage input range of 0 to 10V, ±10V, 0 to 5V, ±5V, and 1 to 5V, alongside a current input range of 0-20 mA, 4-20 mA, and ±20 mA. For detailed specifications, please refer to the product's dedicated webpage.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495319276,"sku":"IC695ALG106","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_c3a3ce77-70f7-40d1-80ca-71846bcbe6e1.png?v=1762701584"},{"product_id":"ge-fanuc-ic695cpe400","title":"GE Fanuc IC695CPE400","description":"\u003cp\u003eThe IC695CPE400 is a compact Outcome Optimizing Controller from the GE Fanuc PACSystems RX3i Series, designed for robust industrial applications. As a rackless and standalone controller, it forms an integral part of GE's Industrial Internet Control System, supporting the PROFINET protocol for seamless industrial networking. This controller utilizes the Field Agent platform as a hypervisor, facilitating interaction with both edge-based and cloud-based applications, allowing for versatile data processing across the network. The IC695CPE400 is equipped with self-upgrading firmware, ensuring automatic updates upon power-up via its Ethernet port. It features 64 MB of RAM and 64 MB of non-volatile flash memory, with the option to utilize an energy pack (IC695ACC403) for memory backup, ensuring data integrity during unexpected power fluctuations. Programming is versatile, supporting languages such as Ladder Diagram, Structured Text, Function Block Diagram, and C syntax. The controller includes four independent Ethernet LANs: LAN1 is accessed via a dedicated RJ45 connector on the front panel, while LAN2 and LAN3 connect through internally-switched RJ45 connectors, and LAN4 is dedicated for the Field Agent platform. The IC695CPE400 operates with a processing speed of 1.2 GHz, providing essential capabilities for industrial automation and control.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495384812,"sku":"IC695CPE400","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_6377d430-b106-47de-a025-613163af543e.png?v=1762701586"},{"product_id":"ge-fanuc-ic694dsm314","title":"GE Fanuc IC694DSM314","description":"\u003cp\u003eThe IC694DSM314 is a Multi-Axis Motion Controller Module designed by GE Fanuc for the RX3i PACSystem series. This advanced module integrates high-performance motion control with the logical processing capabilities inherent to the RX3i PACSystem. It supports two distinct control loop configurations: Standard Mode, where the follower control loop is disabled, and Follower Mode, which enables follower control. The IC694DSM314 is compatible with GE Fanuc α Series and β Series digital servo amplifiers and motors, as well as a variety of other systems. Key features of the module include velocity feed forward with a position error integrator, high-resolution programming units, and the ability to process motion programs for 1 to 4 axes, along with non-volatile storage supporting up to 10 programs and 40 subroutines. The module is equipped with a single-point connection for efficient programming and configuration, while its flash memory allows for firmware updates. Additionally, the IC694DSM314 boasts electronic CAM capability and a range of inputs for each axis. It provides a 13-bit analog output that may be controlled by the PLC or serve as a digital servo tuning monitor, along with high-speed digital outputs managed through four 24V and four 5V local logic controls. Power is supplied at 5 VDC from the backplane, with an additional 800mA available for encoder supply current. Seven status LEDs indicate operational conditions; a steady STAT LED signifies normal operation, while an OFF status indicates a malfunction, and specific blinking patterns denote different error states. It is essential for the IC694DSM314 to be connected to the frame ground via the designated terminal located at the bottom of the module. The module occupies a single slot in the universal backplane and can efficiently manage both analog and digital input\/output operations, drawing 1300 mA of power at 5 VDC.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495352044,"sku":"IC694DSM314","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_cc6f072b-b1a9-404c-8297-be3d9a99a68f.png?v=1762701586"},{"product_id":"ge-fanuc-ic694apu300","title":"GE Fanuc IC694APU300","description":"\u003cp\u003ePart Number: IC694APU300\u003c\/p\u003e\n\n\u003cp\u003eThe IC694APU300 is a high-speed counter module in the GE Fanuc RX3i PACSystems series, designed to efficiently handle rapid signal processing at frequencies of up to 1 MHz. This output module features a robust architecture that allows for immediate input detection and processing without the need for CPU communication, making it particularly suitable for applications like velocity measurement, process control, turbine flow meters, and meter proving. It supports configuration for one complex counter, two identical independent complex counters, or four identical simple counters. \u003c\/p\u003e\n\n\u003cp\u003eKey specifications include 16 words of input memory, which consists of 16 bits of discrete input and 15 words of analog input memory, along with 16 bits of discrete output memory capable of transferring data once per CPU sweep. The module operates in two modes: Classic mode, which provides 16 bits of diagnostic information, and Enhanced mode, offering 32 bits of data to the CPU regarding module operation status. \u003c\/p\u003e\n\n\u003cp\u003eThe IC694APU300 comprises 4 positive logic outputs and 12 positive logic inputs with an operational voltage range of 5 V DC or 10-30 V DC, and draws power from the backplane’s 5 V DC bus while supporting user-supplied power for connected devices at +24 V DC. Installation best practices recommend using an enclosure that minimizes pollutants and employing shielded cables with high-frequency grounding to ensure signal integrity. The module incorporates internal diagnostics and a removable terminal block for easier field wiring, which should be conducted with copper wires of equal gauge. With no DIP switches for configuration, LED indicators are utilized to convey the operating status and diagnostic information. The IC694APU300 is an essential component for high-performance control systems that demand fast and reliable signal processing.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495417580,"sku":"IC694APU300","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_bc0efc80-eb23-41a1-99e7-b47edb249f90.png?v=1762701588"},{"product_id":"ge-fanuc-ic695cmm002","title":"GE Fanuc IC695CMM002","description":"\u003cp\u003eThe IC695CMM002 is a Serial Communications module from the GE Fanuc RX3i PACSystems series, designed to enhance communication capabilities within automated systems. This module features two independent, isolated serial ports, allowing for versatile connection options. It can support a total of six Serial Communications modules within the main PACSystems RX3i backplane. The IC695CMM002 offers compatibility with multiple communication protocols, including Modbus Master\/Slave and DNP 3.0\/Slave, as well as providing custom communication options. This single-slot module is equipped with isolated RS-232 and RS-485\/422 support and operates with an internal power requirement of 0.115A at 5 VDC and 0.7A at 3.3 VDC. The design also accommodates hot swapping for ease of maintenance, ensuring minimal downtime in your automation processes. For detailed specifications, please refer to the IC695CMM002 product page on the manufacturer's website.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495450348,"sku":"IC695CMM002","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_155628b5-746a-4258-a0ed-7221e0a1a4a6.png?v=1762701586"},{"product_id":"ge-fanuc-ic695pbs301","title":"GE Fanuc IC695PBS301","description":"\u003cp\u003eThe GE Fanuc IC695PBS301 is a Profibus Slave Module designed for use with the RX3i Series. This module facilitates slave communications within PROFIBUS DP networks, enhancing system integration and performance. It features a single-slot backplane support and is equipped with a 9-pin connector for network connectivity. The module includes LED indicators for PROFIBUS operational status, network activity, and module status, allowing for efficient monitoring. It operates with a power consumption of 440 mA at 3.3 VDC. For detailed specifications, please refer to the product page for the IC695PBS301.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495483116,"sku":"IC695PBS301","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_077c57ec-7741-45ae-8549-fe14a8245a55.png?v=1762701585"},{"product_id":"ge-fanuc-ic694mdl240","title":"GE FANUC IC694MDL240","description":"\u003cp\u003ePart Number: IC694MDL240\u003c\/p\u003e\n\n\u003cp\u003eThe IC694MDL240 is a high-performance 120 Volt AC Input Module designed for use within the GE Fanuc RX3i PACSystems series. This module features 16 input points that share a single common power input terminal, offering a compact and efficient solution for industrial applications. The input circuits are configured for resistor\/capacitor or reactive inputs, enabling compatibility with a broad range of input devices such as pushbuttons, limit switches, and electronic proximity switches. It is important to note that the maximum number of simultaneous inputs is influenced by ambient temperature, as detailed in the accompanying manual. \u003c\/p\u003e\n\n\u003cp\u003eEach input point, when energized, reflects a logic 1 in the input status table (%I). The module requires a user-supplied AC power source; DC power is not supported. With the inclusion of 16 green LEDs, users can easily monitor the ON\/OFF status of each input point. The IC694MDL240 is marked with red warning bands to indicate its high-voltage nature. Installation is straightforward, as it can be placed in any available I\/O slot within an RX3i system.\u003c\/p\u003e\n\n\u003cp\u003eTechnical Specifications include a rated voltage of 120 Volts AC, an input voltage range from 0 to 132 Volts AC, and operational frequency of 50 to 60 Hertz. The module consumes 90 mA from the 5 V bus and provides isolation of 250V AC continuous from field to backplane, along with 1500V AC for one minute from field to frame ground.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"New","offer_id":47457968357612,"sku":"IC694MDL240-FS","price":390.0,"currency_code":"USD","in_stock":true},{"title":"New Surplus","offer_id":47457968390380,"sku":"IC694MDL240-NS","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/ge-fanuc-ic694mdl240-new-industrial-automation-control-652.jpg?v=1781008778"},{"product_id":"ge-fanuc-ic695cpu310","title":"GE Fanuc IC695CPU310","description":"\u003cp\u003eThe IC695CPU310 is a high-performance Central Processing Unit from the GE Fanuc RX3i PACSystems series, featuring a processing speed of 300 MHz powered by an Intel Celeron microprocessor. It comes equipped with 10 MB of user memory and 10 MB of flash storage, providing ample capacity for complex applications. The CPU includes two embedded serial ports, designed for RS-232 and RS-485 communications, conveniently located on the front of the chassis for straightforward access. The IC695CPU310 supports various serial protocols, including Modbus RTU Slave, SNP, and Serial I\/O, facilitating seamless communication with programmable logic controllers (PLCs) and ensuring effective interaction with HMI devices via the SNP Slave protocol.\u003c\/p\u003e\n\n\u003cp\u003eFor quick status monitoring, eight LEDs on the front panel indicate the operational state of the CPU, battery, and communication channels, adhering to common LED color conventions—steady green for normal operation and red blinks for faults. The CPU's advanced dual backplane bus architecture allows compatibility with RX3i PCI and GE Fanuc Series 90-30-style serial bus frameworks. It can handle up to 512 program blocks, each with a maximum size of 128 KB, and supports multiple programming languages including Ladder Diagram, Structured Text, Function Block Diagram, and C. Ideal for real-time control applications in machinery, processes, and material handling, the IC695CPU310 serves as a robust and versatile solution for automation needs.\u003c\/p\u003e\n\n\u003cp\u003eKey technical specifications include a current rating of 1.25 A at 3.3V DC and 1 A at 5V DC, with an operational temperature range of 0 to 60 degrees Celsius.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495548652,"sku":"IC695CPU310","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_dc91f82b-36f8-4140-89ac-8fd8aa0ee0c2.png?v=1762701587"},{"product_id":"ge-fanuc-ic694psm001","title":"GE Fanuc IC694PSM001","description":"\u003cp\u003eThe IC694PSM001 is a Power Sync and Measurement (PSM) module designed for the GE Fanuc RX3i Series, offering robust capabilities for monitoring two independent three-phase power grids. This module operates within an input voltage range of 20 to 600 VAC and supports a frequency range of 40 to 70 Hz, accommodating diverse applications. The input current range is specified from 0 to 7.5 Amps, ensuring compatibility with a wide array of power systems. The IC694PSM001 provides a singular output and consumes 190 mA from the 5 V bus, making it an efficient addition to industrial control systems. For detailed specifications and further information, please refer to the product page for IC694PSM001.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495581420,"sku":"IC694PSM001","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_9ef1ad55-f455-4164-8e32-78e6aa15a57e.png?v=1762701588"},{"product_id":"ge-fanuc-ic695pns001","title":"GE FANUC IC695PNS001","description":"\u003cp\u003eThe IC695PNS001 is a PROFINET Scanner module from the GE Fanuc RX3i PACSystems series, designed to facilitate connectivity between a remote universal RX3i I\/O rack of Series 90-30 or RX3i modules and a PROFINET I\/O Controller. This module supports a single slot configuration and offers robust protocol support with PROFINET Version 2.3 for Class-A I\/O modules. It is compatible with various RX3i PLC CPUs, including the CPU315, CPU320, CPE305, and CPE310. The module features two RJ-45 ports and two SFP cages for versatile connectivity options. To ensure seamless operation, the IC695PNS001 requires an internal power supply of 1.2 A at 3.3 VDC and a maximum of 1.1 A at 5 VDC. A Micro-B USB connector is provided for firmware upgrades, and the module operates effectively within a temperature range of 0 to 60 degrees Celsius. For further specifications and detailed information, please refer to the IC695PNS001 product page.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"New Surplus","offer_id":47230221615340,"sku":"IC695PNS001-NS","price":1490.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/ge-fanuc-ic695pns001-new-surplus-industrial-automation-control-897.jpg?v=1781008845"},{"product_id":"ge-fanuc-ic694bem331","title":"GE FANUC IC694BEM331","description":"\u003cp\u003eThe GE Fanuc IC694BEM331 Genius Bus Controller is designed to interface between the PACSystems RX3i platform and the Genius I\/O serial bus, providing seamless connectivity for a variety of Genius blocks, remote drops, VersaMax and Field Control I\/O stations, as well as PLCs equipped with Genius Bus capabilities and Genius Hand-Held Monitors (HHM). This robust bus controller supports an exchange of 128 bytes of data with each connected device, enabling automatic fault reporting—such as alarms and predefined issues—back to the bus controller for efficient diagnostics. The controller processes these messages, which can be displayed in the fault table when integrated with the corresponding programming software. The IC694BEM331 is capable of maintaining Genius datagrams and transmitting up to 128 bytes of Global Data per bus review, facilitating spontaneous data broadcasting across the system. With support for up to eight Genius bus controllers, each handling up to 128 bytes, the module enhances system flexibility and capacity. The device features LED indicators on the front panel for operational status. Its advanced diagnostic functionality leverages a daisy-chained bus cable using a single twisted pair plus shielding or Twinax, with options for fiber optic cable and modems. The maximum bus lengths vary depending on baud rate, ranging from 7800 feet at 4Kbaud to 2000 feet at 153.6 Kbaud. The controller can accommodate up to 32 devices at most baud rates, although this number drops to 16 at 38.4 Kbaud. It is compatible with multiple series, allowing for data exchange with RX3i Genius bus controllers running firmware version 1.5 or higher. Note that this module does not include a handheld monitor connector; however, a handheld monitor can still interface with the controller. The IC694BEM331 operates on a 5V DC supply and has an operational current of 300 mA, with transient ratings up to 1500 volts.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"New","offer_id":47555921084652,"sku":"IC694BEM331-FS","price":1990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/ge-fanuc-ic694bem331-new-industrial-automation-control-980.jpg?v=1781008768"},{"product_id":"ge-fanuc-ic695alg616","title":"GE Fanuc IC695ALG616","description":"\u003cp\u003eThe GE Fanuc IC695ALG616 is a 16\/8 Channel Analog Input module designed for the RX3i PACSystems. This versatile module facilitates 16 single-ended or 8 differential input channels, delivering exceptional performance for voltage and current measurements. The IC695ALG616 requires installation on the RX3i Universal Backplane to function optimally. It supports a current range of 0-20 mA, 4-20 mA, and +\/-20 mA, alongside a voltage range of +\/-10V, 0-10V, +\/-5V, 0-5V, and 1-5V. The module is factory calibrated to 2.5 mV per count and operates with an internal power requirement of 450 mA at 3.3V and 600 mA at 5V. With an update rate of approximately 5 milliseconds for both channels, it ensures timely data acquisition. The IC695ALG616 can operate with an external supply voltage ranging from 18 to 30V DC, with a ripple specified at 10%. This module features a maximum output load capacitance of 2000 pF, making it ideal for a variety of industrial automation applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495679724,"sku":"IC695ALG616","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_ad80f920-ad45-4603-a06f-e683594d8d07.png?v=1762701587"},{"product_id":"ge-fanuc-ic695cmm004","title":"GE Fanuc IC695CMM004","description":"\u003cp\u003eThe IC695CMM004 is a Serial Communications module within the GE Fanuc RX3i Series, designed to enhance communication capabilities in industrial automation systems. This module features four independent, isolated serial ports that support versatile communication protocols including Modbus Master\/Slave, DNP 3.0\/Slave, CCM, and various custom communication options. It is engineered for compatibility with the universal backplane of the PACSystems RX3i architecture, allowing the integration of up to six Serial Communications modules in a single backplane. The IC695CMM004 draws a power requirement of 0.150A at 5 VDC and 0.7A at 3.3 VDC. For advanced connectivity, the module provides interface support for RS-232, RS-485, and RS-422, with a baud rate range from 1200 to 115.2 kilobaud. Additionally, this module is hot-swappable, enabling seamless maintenance and upgrades without system downtime. Please refer to the specifications page for further details on this unit.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495712492,"sku":"IC695CMM004","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_de14a577-5098-409e-bf38-61cac5d8f8fe.png?v=1762701587"},{"product_id":"ge-fanuc-ic694mdl646","title":"GE Fanuc IC694MDL646","description":"\u003cp\u003eThe IC694MDL646 is a 16-point, 24 Volt DC input module from the GE Fanuc RX3i Series, designed to accommodate positive and negative logic signals. This module features a single group configuration, allowing for efficient connection with a common power input terminal. It is optimized for swift response, with ON and OFF transition times typically around 1 millisecond, ensuring effective control in dynamic applications. The module supports an input voltage range of 0 to +30 VDC and requires an input current of 7 mA per point. Additionally, it draws 80 mA from the 5V bus and 125 mA from the 24V supply, making it well-suited for various automation tasks. For detailed specifications, please refer to the IC694MDL646 product page.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495745260,"sku":"IC694MDL646","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_2bc4fb32-183d-4db6-8f5c-778fe32941e7.png?v=1762701590"},{"product_id":"ge-fanuc-ic694mdl741","title":"GE Fanuc IC694MDL741","description":"\u003cp\u003eThe IC694MDL741 is a 16-point output module from the GE Fanuc RX3i Series, designed to operate with a voltage range of 12 to 24 volts DC and a maximum output current of 0.5 Amperes per point, employing negative logic for reliable performance. This module features 16 output points divided into two groups of eight, accommodating a variety of automation and control applications. It draws a power consumption of 110 mA from the 5V bus, ensuring efficient operation. The IC694MDL741 is engineered for flexibility within modern control systems, providing robust outputs to meet industrial demands. For detailed specifications and additional information, please refer to the product's dedicated webpage.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495778028,"sku":"IC694MDL741","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_d3a6b78a-b1d9-4ea6-9169-4f17fca5f8f9.png?v=1762701589"},{"product_id":"ge-fanuc-ic695acc403","title":"GE Fanuc IC695ACC403","description":"\u003cp\u003ePart Number: IC695ACC403\u003c\/p\u003e\n\n\u003cp\u003eThe IC695ACC403 Energy Pack is an essential accessory designed to enhance the reliability of GE Fanuc controllers during power fluctuations or outages. This unit preserves user memory within the controller by supplying adequate power when system power is interrupted, allowing the controller to write user memory contents to non-volatile storage. Upon restoration of power, the controller can retrieve the stored user memory if configured to start from RAM. To operate effectively, this Energy Pack requires a compatible 24Vdc, 72W SELV power supply, along with an 18 AWG (0.82 mm²) copper power cord and an additional 18 AWG (0.82 mm²) copper wire for frame grounding. An input power terminal block is included for convenient installation, and a small flat-head screwdriver is recommended for secure connections.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495810796,"sku":"IC695ACC403","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_ac9a4468-ac9a-43f0-bfad-ee328453d90b.png?v=1762701588"},{"product_id":"ge-fanuc-ic694mdl940","title":"GE Fanuc IC694MDL940","description":"\u003cp\u003eThe IC694MDL940 is a 16-point relay output module from the GE Fanuc RX3i PACSystems series, designed for versatile industrial applications. This module features four groups of four outputs, each capable of handling a current of 2 Amps, supporting a maximum of 4 Amps per common. It operates at rated voltages of 24 volts DC and 120\/240 volts AC, with a frequency compatibility of 50\/60 Hz for AC operation. The output voltage ranges from 5 to 30 volts DC and 5 to 250 volts AC, making it suitable for a wide array of control scenarios. The IC694MDL940 module also boasts an isolation voltage of 250 volts AC and 1500 volts DC, ensuring reliable performance and protection in industrial environments. Additionally, power consumption is minimal, drawing 7 mA from the 5V bus and 135 mA from the 24V relay supply. For further specifications, please refer to the dedicated webpage for the IC694MDL940.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495843564,"sku":"IC694MDL940","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_22202d0f-3958-42c4-b8d3-81a20b497ef0.png?v=1762701588"},{"product_id":"ge-fanuc-ic694alg233","title":"GE Fanuc IC694ALG233","description":"\u003cp\u003ePart Number: IC694ALG233\u003c\/p\u003e\n\n\u003cp\u003eThe IC694ALG233 is a PACSystems RX3i Analog Current Input Module featuring 16 single-ended input channels. This versatile module can be configured using software for three distinct input ranges: 4 to 20 mA, 0 to 20 mA, and the Enhanced 4 to 20 mA range. Notably, the Enhanced range includes a low alarm limit that facilitates open-wire fault detection, effectively identifying a lack of input current between 4 mA and 0 mA. The module consistently monitors both its status and the status of the external power supply, reporting this information to the CPU via designated program reference addresses. Designed for integration within an RX3i system, the IC694ALG233 must be installed in an I\/O slot equipped with a serial connector, and its software configuration eliminates the need for any adjustable jumpers. It also supports open-circuit detection for all inputs when using the Enhanced Range. Additional features include configurable scaling, offset adjustments, fault reporting, and the ability to manage diagnostic point fault contacts within the logic program. Furthermore, the module allows for firmware upgrades and offers positive and negative rate of change alarms. Status indicators are provided through easily interpretable LEDs: a steady ON light indicates proper configuration, while an OFF state suggests a lack of backplane power or potential software issues. Rapid blinking signals configuration data problems, slow blinking followed by OFF indicates diagnostic failures, and the USER SUPPLY LED confirms the adequacy of the external 24 VDC supply. The module operates with an internal power consumption of +5V at 120 mA and supports installation in a single slot with no backplane restrictions.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495876332,"sku":"IC694ALG233","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_5937aa17-ef7e-4e87-80fe-1e8424859d4a.png?v=1762701592"},{"product_id":"ge-fanuc-ic694mdl916","title":"GE Fanuc IC694MDL916","description":"\u003cp\u003eThe IC694MDL916 is a 16-point, isolated relay output module engineered for the GE Fanuc RX3i PACSystems. This module features 16 Form A relays designed to effectively control a variety of output loads, making it suitable for a range of industrial automation applications. The IC694MDL916 supports an output voltage range of 5 to 125 VDC and 5 to 250 VAC, delivering a maximum output current of 4 Amps per point. It operates within a frequency range of 47 to 63 Hz for AC loads. The module requires a power consumption of 300 mA from the 5V bus and 150 mA from the 24V relay supply. With a rated voltage capability of 5, 24, and 125 VDC, as well as 120 and 240 VAC, the IC694MDL916 offers versatile connectivity to meet diverse control needs. For detailed specifications and technical documentation, please refer to the product's dedicated webpage.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495909100,"sku":"IC694MDL916","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_c80c1f2f-e489-4dfd-956b-4d321a9bcd88.png?v=1762701589"},{"product_id":"ge-fanuc-ic695spc100","title":"GE Fanuc IC695SPC100","description":"\u003cp\u003eThe GE Intelligent Platforms RX3i, designated as part number IC695SPC100, represents a robust and versatile solution within the GE Fanuc industrial automation and control systems portfolio. This programmable automation controller is designed to facilitate complex control applications across various industries, combining high performance with extensive connectivity options. The RX3i supports a wide array of I\/O modules and communication protocols, enabling seamless integration into existing systems and enhancing operational efficiency. Engineered for reliability and scalability, the RX3i serves as a foundational element for modern automation solutions, catering to both small and large-scale deployments. With its advanced processing capabilities and user-friendly interface, the RX3i empowers users to optimize their automation processes while ensuring precise control and monitoring.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495941868,"sku":"IC695SPC100","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_a6db8e08-1d79-4505-ab75-bda7d5256a8e.png?v=1762701588"},{"product_id":"ge-fanuc-ic694mdl634","title":"GE Fanuc IC694MDL634","description":"\u003cp\u003ePart Number: IC694MDL634\u003c\/p\u003e\n\n\u003cp\u003eThe GE Fanuc IC694MDL634 is a 24 VDC, 8-point Positive\/Negative Logic Input Module designed for use within the Rx3i PACSystem series. This module operates on a 24 VDC power supply and features eight inputs capable of accepting signals from either positive or negative logic devices. In positive logic configuration, the module sinks current from the device to the user common, while in negative logic, the operation is reversed. Inputs are connected between the positive power bus and the input terminals. When integrated with a PLC system's expansion backplane, the module draws its power from the backplane; however, an external +24 VDC supply is necessary when connecting to a universal backplane. Compatible devices include pushbuttons, limit switches, and electronic proximity switches. The IC694MDL634 is equipped with eight indication LEDs corresponding to terminals 2 through 9 of its 20 total terminals, allowing for straightforward monitoring of the input status. A blue label designates this module as a low voltage component, ensuring easy identification. It can be installed in any slot within the RX3i system, offering full compatibility across the series. Technical specifications for the module include a rated voltage of 24 volts DC, eight inputs arranged in one group, an input current rating of 7 mA, an input voltage range of 0 to +30 VDC, and a power consumption of 45 mA from the 5V bus and 62 mA from the 24V supply.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964495974636,"sku":"IC694MDL634","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_6917630b-8115-4fcc-9775-012464ea01df.png?v=1762701591"},{"product_id":"ge-fanuc-ic694dsm324","title":"GE Fanuc IC694DSM324","description":"\u003cp\u003eThe IC694DSM324 is a highly versatile motion controller module designed for use within the GE Fanuc Rx3i PACSystem. This multi-axis module supports both standard mode, where the follower control loop is disabled, and follower mode, where it is enabled. It features advanced electronic CAM functionality and includes an analog I\/O port for PC connectivity, as well as individual switch inputs for each servo axis. Programming and configuration can be easily managed through a single connection point; the module utilizes flash memory for firmware storage, which can be updated via the COMM port. With non-volatile memory capable of storing up to 10 programs and 40 subroutines, the IC694DSM324 is designed to accommodate a powerful set of motion programming instructions for controlling one to four axes.\u003c\/p\u003e\n\n\u003cp\u003eThe module is equipped with eight LED indicators that provide real-time status feedback. The STATUS LED is typically lit, indicating normal operation; if it turns off, this signals an error condition. The CONFIG LED illuminates during module configuration, while the FSSB LED indicates active FSSB communications, blinking during the setup phase. Individual axis-enabled LEDs indicate the operational status of drives for axes 1 through 4. Additionally, the FSSB connector facilitates fiber-optic connectivity to servo amplifiers for seamless command and diagnostic exchanges, and it is protected by a cap to prevent damage. The RJ-11 COMM port is designated for firmware update downloads. Power is supplied through dedicated ports for 24 VDC and 5 VDC, with pre-manufactured cables available in lengths of 1 meter and 3 meters. For optimal performance, the IC694DSM324 should be grounded to the frame using the ground terminal located at the module's base, with a grounding resistance of 100 ohms or less. \u003c\/p\u003e\n\n\u003cp\u003eIn summary, the IC694DSM324 is a single-slot servo motion module that efficiently operates on a universal backplane and requires a power consumption of 1360 mA at 5 VDC, making it an essential component for sophisticated motion control applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964496040172,"sku":"IC694DSM324","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_136f4e21-1f95-4f56-9c57-355811c34e31.png?v=1762701587"},{"product_id":"ge-fanuc-ic694alg222","title":"GE Fanuc IC694ALG222","description":"\u003cp\u003eThe GE Fanuc IC694ALG222 is a 16-channel analog voltage input module designed for the RX3i PACSystems. This versatile module offers 16 single-ended or 8 differential input channels, allowing for flexible configuration via configuration software. It supports two input ranges: a unipolar range of 0 to 10 V and a default bipolar range of -10 to +10 V, with configurable high and low alarm limits applicable to both range types.\u003c\/p\u003e\n\n\u003cp\u003eInstallation of the IC694ALG222 can be accomplished in any I\/O slot within an RX3i system, although the location impacts the power supply requirements. If installed in a Universal Backplane, an external isolated +24 VDC power source must be connected through the TB1 connector located on the left side of the backplane. Conversely, when placed in an Expansion Backplane, the module receives isolated +24 VDC power directly from the system's power supply. The module features a MODULE OK LED that indicates status on power-up; a steady ON LED signifies correct module configuration and operational status, while an OFF LED indicates either no backplane power or a watchdog timer timeout. Continuous rapid flashing denotes an absence of configuration data from the CPU, while a slow flash followed by OFF signals failed power-up diagnostics or a code execution error. Additionally, the Module P\/S LED provides verification that the module's +5 VDC supply is at an acceptable level.\u003c\/p\u003e\n\n\u003cp\u003eIn terms of technical specifications, the IC694ALG222 supports a maximum update rate of 6 milliseconds for all 16 channels in single-ended mode and 3 milliseconds for 8 channels in differential mode, with a linearity of less than 1 LSB. The module also features an isolation voltage of 250 volts AC for continuous operation and up to 1500 volts AC for one minute. Cross-channel rejection is measured at less than 80 decibels from DC to 1 kilohertz, ensuring reliable performance in various industrial applications.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964496007404,"sku":"IC694ALG222","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_11bec8b5-0786-4563-bdd6-a74f54bab20c.png?v=1762701591"},{"product_id":"ge-fanuc-ic694mdr390","title":"GE Fanuc IC694MDR390","description":"\u003cp\u003eThe GE Fanuc IC694MDR390 is a Mixed Input\/Output module designed for versatile industrial applications. This module supports 8 digital inputs with a voltage range of 8-24VDC, allowing for integration with various sensors and devices. Additionally, it features 8 relay outputs, providing reliable control capabilities for actuators, motors, and other equipment. The IC694MDR390 is a crucial component for enhancing the flexibility and functionality of your control system, facilitating efficient data acquisition and process automation in a wide range of environments.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964496072940,"sku":"IC694MDR390","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_f8e29de9-6b29-4e0c-a071-db8fcf2941be.png?v=1762701590"},{"product_id":"ge-fanuc-ic694mdl260","title":"GE Fanuc IC694MDL260","description":"\u003cp\u003eThe GE Fanuc IC694MDL260 is a 32-point Input Module designed for the Rx3i PACSystem, specifically rated for 120 VAC operation. This module features 32 discrete input points organized into four isolated groups, each containing eight inputs. Each group maintains isolation from the others, while all inputs within a group share a common connection. The IC694MDL260 supports various terminal block options, including box-style (IC694TBB032), extended box-style (IC694TBB132), spring-style (IC694TBS032), and extended spring-style (IC694TBS132), with the extended blocks providing additional shroud depth necessary for field wiring to AC devices. Please note that the terminal block is sold separately. Input filter times can be configured through the programmer using assigned output data references, with adjustable times ranging from 20 ms to 254 ms in 20 ms increments. The module is equipped with individually-numbered LEDs that indicate the ON\/OFF status for each of the 32 points, along with a red\/green terminal block LED that signals the secure locking status of the removable terminal block. A warning marked by red bands on the label indicates the high-voltage nature of this module. It can be installed in any I\/O slot within an RX3i system, though it is compatible exclusively with RX3i CPUs (version 3.50 or greater) and does not support Series 90-30 PLC CPUs. The IC694MDL260 operates within an input voltage range of 0 to 132 VAC (47-63 Hz) and typically requires an input current of 7.0 mA per point at the rated voltage, with a total power consumption of 220 mA from the 5V DC bus when all inputs are activated.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964496105708,"sku":"IC694MDL260","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_37a27dbf-388b-4e73-9d3a-7dd99c5302ac.png?v=1762701588"},{"product_id":"ge-fanuc-ic695psa040","title":"GE Fanuc IC695PSA040","description":"\u003cp\u003eThe IC695PSA040 is a 40 Watt power supply module from the GE Fanuc RX3i PACSystems series, engineered to operate effectively with both 120\/240 volt AC and 125 volt DC power sources. It supports an input voltage range of 85 to 264 VAC or 100 to 300 VDC, making it versatile for various applications. This power supply provides three distinct output voltages: +3.3 VDC for internal RX3i modules, +5.1 VDC, and +24 VDC, the latter of which can be utilized to energize circuits on output relay modules. The scalable, rack-based architecture of the RX3i system enables rapid and reliable control across multiple modules, allowing users to create and maintain bespoke control functions, including advanced visualization, motion, and networking capabilities. Notably, the IC695PSA040 is designed for single installation within the Universal Backplane and is not compatible with other RX3i power supplies for enhanced capacity or redundancy. The module features four status LEDs to indicate operational conditions: Power, P\/S Fault, Overtemp, and Overload. These provide critical real-time feedback on power availability, fault conditions, and temperature thresholds. For operational safety, it is essential to keep the unit door closed during use to mitigate the risk of electrical shock. The power supply conforms to rigorous standards with a backplane isolation rating of 250 VAC continuous and 1500 VAC for one minute. Ideal for enhancing advanced machine automation, the IC695PSA040 is a crucial component of the RX3i control system.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964496138476,"sku":"IC695PSA040","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_ad8fcc5d-299f-460b-a9ff-f9a308502626.png?v=1762701590"},{"product_id":"ge-fanuc-ic695alg508","title":"GE Fanuc IC695ALG508","description":"\u003cp\u003eThe IC695ALG508 is an 8-Channel Isolated Resistance Temperature Detector (RTD) Input module designed for the GE Fanuc RX3i Series. This module features eight isolated differential RTD input channels, enabling precise temperature measurements in industrial applications. To ensure compatibility, the IC695ALG508 must be installed within an RX3i Universal Backplane and requires RX3i CPU firmware version 5.5 or later. The module occupies a single slot in the backplane and operates with an internal power requirement of 3.3V at 400mA and 5.1V at 200mA, with a maximum power dissipation of 2.5W. It supports a range of input resistance values of 250, 500, 1000, 2000, 3000, and 4000 ohms, providing flexibility for various sensing applications. For additional specifications, please refer to the product's dedicated webpage.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964496171244,"sku":"IC695ALG508","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_0a620bbe-c770-4a2c-acf9-1784b1cd784b.png?v=1762701589"},{"product_id":"ge-fanuc-ic695prs015","title":"GE Fanuc IC695PRS015","description":"\u003cp\u003ePart Number: IC695PRS015  \n\u003cbr\u003eThe IC695PRS015 is a Pressure Transducer Module designed for the GE Fanuc RX3i Series. This module enhances the serial communication capabilities of the RX3i control system, enabling efficient data acquisition and monitoring of pressure parameters. It features LED indicators for MODULE OK, PORT FAULT, and PORT STATUS, facilitating real-time diagnostics and status monitoring. The module occupies a single slot in the universal backplane and is equipped with one RJ-45 port for connectivity. Power requirements for this module are 0.7 A at 3.3 VDC and 0.115 A at 5 VDC. For detailed specifications and further information, please refer to the IC695PRS015 product page.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":46964496204012,"sku":"IC695PRS015","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/GE_FANUC_63f0ffdb-04e4-40c7-a2c2-9b57c4e29459.png?v=1762701590"},{"product_id":"ge-fanuc-ic695alg708","title":"GE FANUC IC695ALG708","description":"\u003cp\u003eThe IC695ALG708 is an advanced 8-channel, non-isolated analog output module designed for the GE FANUC RX3i Series. This module delivers versatile performance with the capability to provide configurable voltage or current output across its eight channels. Users can easily implement voltage outputs ranging from 0 to +10 V or -10 to +10 V, as well as current outputs of 0-20 mA and 4-20 mA. With an update rate of 8 milliseconds and an output load capacity of 850 ohms, the IC695ALG708 ensures reliable operation in demanding industrial environments. Power consumption is rated at 375 mA at +3.3VDC and 315 mA at +24VDC, resulting in a total power dissipation of 7.25 watts. For detailed technical specifications, please refer to the product's dedicated webpage.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"New","offer_id":47607462854892,"sku":"IC695ALG708-FS","price":1990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/files\/ge-fanuc-ic695alg708-new-industrial-automation-control-202.jpg?v=1781008803"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0217\/1112\/6600\/collections\/GE_Fanuc_Collection_Group_Photo_38c0307d-8c27-4ee2-982f-2e1d38ef4a8e.png?v=1762768573","url":"https:\/\/www.industrialautomationco.com\/collections\/ge-fanuc-emerson-rx3i-pacsystem.oembed?page=8","provider":"Industrial Automation Co.","version":"1.0","type":"link"}